1 files changed, 0 insertions, 110 deletions
diff --git a/driver/retimer/kb800x.h b/driver/retimer/kb800x.h
deleted file mode 100644
index 5f8cf2810d..0000000000
--- a/driver/retimer/kb800x.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Driver for Kandou KB8001 USB-C 40 Gb/s multiprotocol switch.
- */
-
-#ifndef __CROS_EC_KB800X_H
-#define __CROS_EC_KB800X_H
-
-#include "compile_time_macros.h"
-#include "gpio_signal.h"
-#include "usb_mux.h"
-
-#define KB800X_I2C_ADDR0_FLAGS	0x08
-#define KB800X_I2C_ADDR1_FLAGS	0x0C
-
-extern const struct usb_mux_driver kb800x_usb_mux_driver;
-
-/* Set the protocol */
-#define KB800X_REG_PROTOCOL			0x0001
-#define KB800X_PROTOCOL_USB3			0x0
-#define KB800X_PROTOCOL_DPMF			0x1
-#define KB800X_PROTOCOL_DP			0x2
-#define KB800X_PROTOCOL_CIO			0x3
-
-/* Configure the lane orientaitons */
-#define KB800X_REG_ORIENTATION			0x0002
-#define KB800X_ORIENTATION_POLARITY		0x1
-#define KB800X_ORIENTATION_DP_UFP		0x4
-#define KB800X_ORIENTATION_DP_DFP		0x6
-#define KB800X_ORIENTATION_CIO_LANE_SWAP	0x8
-/* Select one, 0x0 for non-legacy */
-#define KB800X_ORIENTATION_CIO_LEGACY_PASSIVE	(0x1 << 4)
-#define KB800X_ORIENTATION_CIO_LEGACY_UNIDIR	(0x2 << 4)
-#define KB800X_ORIENTATION_CIO_LEGACY_BIDIR	(0x3 << 4)
-
-#define KB800X_REG_RESET			0x0006
-#define KB800X_RESET_FSM			BIT(0)
-#define KB800X_RESET_MM				BIT(1)
-#define KB800X_RESET_SERDES			BIT(2)
-#define KB800X_RESET_COM			BIT(3)
-#define KB800X_RESET_MASK			GENMASK(3, 0)
-
-#define KB800X_REG_XBAR_OVR			0x5040
-#define KB800X_XBAR_OVR_EN			BIT(6)
-
-/* Registers to configure the elastic buffer input connection */
-#define KB800X_REG_XBAR_EB1SEL			0x5044
-#define KB800X_REG_XBAR_EB23SEL			0x5045
-#define KB800X_REG_XBAR_EB4SEL			0x5046
-#define KB800X_REG_XBAR_EB56SEL			0x5047
-
-/* Registers to configure the elastic buffer output connection (x=0-7) */
-#define KB800X_REG_TXSEL_FROM_PHY(x)		(0x5048+((x)/2))
-
-enum kb800x_ss_lane {
-	KB800X_TX0 = 0,
-	KB800X_TX1,
-	KB800X_RX0,
-	KB800X_RX1
-};
-
-enum kb800x_phy_lane {
-	KB800X_A0 = 0,
-	KB800X_A1,
-	KB800X_B0,
-	KB800X_B1,
-	KB800X_C0,
-	KB800X_C1,
-	KB800X_D0,
-	KB800X_D1,
-	KB800X_PHY_LANE_COUNT
-};
-
-enum kb800x_eb {
-	KB800X_EB1 = 0,
-	KB800X_EB2,
-	KB800X_EB3,
-	KB800X_EB4,
-	KB800X_EB5,
-	KB800X_EB6
-};
-
-#define KB800X_FLIP_SS_LANE(x) ((x) + 1 - 2*((x) & 0x1))
-#define KB800X_LANE_NUMBER_FROM_PHY(x) ((x) & 0x1)
-#define KB800X_PHY_IS_AB(x) ((x) <= KB800X_B1)
-
-struct kb800x_control_t {
-	enum gpio_signal retimer_rst_gpio;
-	enum gpio_signal usb_ls_en_gpio;
-#ifdef CONFIG_KB800X_CUSTOM_XBAR
-	enum kb800x_ss_lane ss_lanes[KB800X_PHY_LANE_COUNT];
-#endif /* CONFIG_KB800X_CUSTOM_XBAR */
-};
-
-/*
- * Default 'example' lane mapping. With this mapping, CONFIG_KB800X_CUSTOM_XBAR
- * can be undefined, since a custom xbar mapping is not needed.
- * ss_lanes = {
- * [KB800X_A0] = KB800X_TX0, [KB800X_A1] = KB800X_RX0,
- * [KB800X_B0] = KB800X_RX1, [KB800X_B1] = KB800X_TX1,
- * [KB800X_C0] = KB800X_RX0, [KB800X_C1] = KB800X_TX0,
- * [KB800X_D0] = KB800X_TX1, [KB800X_D1] = KB800X_RX1,}
- */
-
-extern struct kb800x_control_t kb800x_control[];
-
-
-#endif /* __CROS_EC_KB800X_H  */