diff options
Diffstat (limited to 'driver/temp_sensor/bd99992gw.c')
| -rw-r--r-- | driver/temp_sensor/bd99992gw.c | 182 |
1 files changed, 0 insertions, 182 deletions
diff --git a/driver/temp_sensor/bd99992gw.c b/driver/temp_sensor/bd99992gw.c deleted file mode 100644 index e66642224c..0000000000 --- a/driver/temp_sensor/bd99992gw.c +++ /dev/null @@ -1,182 +0,0 @@ -/* Copyright 2015 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * BD99992GW PMIC temperature sensor module for Chrome EC. - * Note that ADC / temperature sensor registers are only active while - * the PMIC is in S0. - */ - -#include "bd99992gw.h" -#include "chipset.h" -#include "common.h" -#include "console.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "temp_sensor.h" -#include "temp_sensor/thermistor.h" -#include "timer.h" -#include "util.h" - -/* Console output macros */ -#define CPUTS(outstr) cputs(CC_THERMAL, outstr) -#define CPRINTS(format, args...) cprints(CC_THERMAL, format, ## args) - -/* List of active channels, ordered by pointer register */ -static enum bd99992gw_adc_channel - active_channels[BD99992GW_ADC_POINTER_REG_COUNT]; - -/* - * Use 27ms as the period between ADC conversions, as we will typically be - * sampling temperature sensors every second, and 27ms is the longest - * supported period. - */ -#define ADC_LOOP_PERIOD BD99992GW_ADC1CNTL1_SLP27MS - -static int raw_read8(const int offset, int *data_ptr) -{ - int ret; - ret = i2c_read8(I2C_PORT_THERMAL, BD99992GW_I2C_ADDR_FLAGS, - offset, data_ptr); - if (ret != EC_SUCCESS) - CPRINTS("bd99992gw read fail %d", ret); - return ret; -} - -static int raw_write8(const int offset, int data) -{ - int ret; - ret = i2c_write8(I2C_PORT_THERMAL, BD99992GW_I2C_ADDR_FLAGS, - offset, data); - if (ret != EC_SUCCESS) - CPRINTS("bd99992gw write fail %d", ret); - return ret; -} - -static void bd99992gw_init(void) -{ - int i; - int active_channel_count = 0; - uint8_t pointer_reg = BD99992GW_REG_ADC1ADDR0; - - /* Mark active channels from the board temp sensor table */ - for (i = 0; i < TEMP_SENSOR_COUNT; ++i) - if (temp_sensors[i].read == bd99992gw_get_val) - active_channels[active_channel_count++] = - temp_sensors[i].idx; - - /* Make sure we don't have too many active channels. */ - ASSERT(active_channel_count <= ARRAY_SIZE(active_channels)); - - /* Mark the first unused channel so we know where to stop searching */ - if (active_channel_count != ARRAY_SIZE(active_channels)) - active_channels[active_channel_count] = - BD99992GW_ADC_CHANNEL_NONE; - - /* Now write pointer regs with channel to monitor */ - for (i = 0; i < active_channel_count; ++i) - /* Write stop bit on last channel */ - if (raw_write8(pointer_reg + i, active_channels[i] | - ((i == active_channel_count - 1) ? - BD99992GW_ADC1ADDR_STOP : 0))) - return; - - /* Enable ADC interrupts */ - if (raw_write8(BD99992GW_REG_MADC1INT, 0xf & ~BD99992GW_MADC1INT_RND)) - return; - if (raw_write8(BD99992GW_REG_IRQLVL1MSK, BD99992GW_IRQLVL1MSK_MADC)) - return; - - /* Enable ADC sequencing */ - if (raw_write8(BD99992GW_REG_ADC1CNTL2, BD99992GW_ADC1CNTL2_ADCTHERM)) - return; - - /* Start round-robin conversions at 27ms period */ - raw_write8(BD99992GW_REG_ADC1CNTL1, ADC_LOOP_PERIOD | - BD99992GW_ADC1CNTL1_ADEN | BD99992GW_ADC1CNTL1_ADSTRT); -} -/* - * Some regs only work in S0, so we must initialize on AP startup in - * addition to INIT. - */ -DECLARE_HOOK(HOOK_INIT, bd99992gw_init, HOOK_PRIO_DEFAULT); -DECLARE_HOOK(HOOK_CHIPSET_RESUME, bd99992gw_init, HOOK_PRIO_DEFAULT); - -/* Convert ADC result to temperature in celsius */ -static int bd99992gw_get_temp(uint16_t adc) -{ -#ifdef CONFIG_THERMISTOR_NCP15WB - return ncp15wb_calculate_temp(adc); -#else -#error "Unknown thermistor for bd99992gw" - return 0; -#endif -} - -/* Get temperature from requested sensor */ -int bd99992gw_get_val(int idx, int *temp_ptr) -{ - uint16_t adc; - int i, read, ret; - enum bd99992gw_adc_channel channel; - - /* ADC unit is only functional in S0 */ - if (!chipset_in_state(CHIPSET_STATE_ON)) - return EC_ERROR_NOT_POWERED; - - /* Find requested channel */ - for (i = 0; i < ARRAY_SIZE(active_channels); ++i) { - channel = active_channels[i]; - if (channel == idx || - channel == BD99992GW_ADC_CHANNEL_NONE) - break; - } - - /* Make sure we found it */ - if (i == ARRAY_SIZE(active_channels) || - active_channels[i] != idx) { - CPRINTS("Bad ADC channel %d", idx); - return EC_ERROR_INVAL; - } - - /* Pause conversions */ - ret = raw_write8(0x80, - ADC_LOOP_PERIOD | - BD99992GW_ADC1CNTL1_ADEN | - BD99992GW_ADC1CNTL1_ADSTRT | - BD99992GW_ADC1CNTL1_ADPAUSE); - if (ret) - return ret; - - /* Read 10-bit ADC result */ - ret = raw_read8(BD99992GW_REG_ADC1DATA0L + 2 * i, &read); - if (ret) - return ret; - adc = read; - ret = raw_read8(BD99992GW_REG_ADC1DATA0H + 2 * i, &read); - if (ret) - return ret; - adc |= read << 2; - - /* Convert temperature to C / K */ - *temp_ptr = C_TO_K(bd99992gw_get_temp(adc)); - - /* Clear interrupts */ - ret = raw_write8(BD99992GW_REG_ADC1INT, BD99992GW_ADC1INT_RND); - if (ret) - return ret; - ret = raw_write8(BD99992GW_REG_IRQLVL1, BD99992GW_IRQLVL1_ADC); - if (ret) - return ret; - - /* Resume conversions */ - ret = raw_write8(BD99992GW_REG_ADC1CNTL1, ADC_LOOP_PERIOD | - BD99992GW_ADC1CNTL1_ADEN | BD99992GW_ADC1CNTL1_ADSTRT); - if (ret) - return ret; - - return EC_SUCCESS; -} |