1 files changed, 0 insertions, 132 deletions
diff --git a/driver/usb_mux/pi3usb3x532.c b/driver/usb_mux/pi3usb3x532.c
deleted file mode 100644
index 2435157967..0000000000
--- a/driver/usb_mux/pi3usb3x532.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/* Copyright 2015 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Pericom PI3USB3X532 USB port switch driver.
- */
-
-#include "common.h"
-#include "i2c.h"
-#include "pi3usb3x532.h"
-#include "usb_mux.h"
-#include "util.h"
-
-static int pi3usb3x532_read(const struct usb_mux *me,
-			    uint8_t reg, uint8_t *val)
-{
-	int read, res;
-
-	/*
-	 * First byte read will be i2c address (ignored).
-	 * Second byte read will be vendor ID.
-	 * Third byte read will be selection control.
-	 */
-	res = i2c_read16(me->i2c_port, me->i2c_addr_flags, 0, &read);
-	if (res)
-		return res;
-
-	if (reg == PI3USB3X532_REG_VENDOR)
-		*val = read & 0xff;
-	else /* reg == PI3USB3X532_REG_CONTROL */
-		*val = (read >> 8) & 0xff;
-
-	return EC_SUCCESS;
-}
-
-static int pi3usb3x532_write(const struct usb_mux *me,
-			     uint8_t reg, uint8_t val)
-{
-	if (reg != PI3USB3X532_REG_CONTROL)
-		return EC_ERROR_UNKNOWN;
-
-	return i2c_write8(me->i2c_port, me->i2c_addr_flags, 0, val);
-}
-
-int pi3usb3x532_check_vendor(const struct usb_mux *me, int *val)
-{
-	int res;
-	uint8_t read;
-
-	res = pi3usb3x532_read(me, PI3USB3X532_REG_VENDOR, &read);
-	if (res)
-		return res;
-
-	*val = read;
-
-	return EC_SUCCESS;
-}
-
-static int pi3usb3x532_reset(const struct usb_mux *me)
-{
-	return pi3usb3x532_write(
-		me,
-		PI3USB3X532_REG_CONTROL,
-		(PI3USB3X532_MODE_POWERDOWN & PI3USB3X532_CTRL_MASK) |
-		PI3USB3X532_CTRL_RSVD);
-}
-
-static int pi3usb3x532_init(const struct usb_mux *me)
-{
-	uint8_t val;
-	int res;
-
-	res = pi3usb3x532_reset(me);
-	if (res)
-		return res;
-	res = pi3usb3x532_read(me, PI3USB3X532_REG_VENDOR, &val);
-	if (res)
-		return res;
-	if (val != PI3USB3X532_VENDOR_ID)
-		return EC_ERROR_UNKNOWN;
-
-	return EC_SUCCESS;
-}
-
-/* Writes control register to set switch mode */
-static int pi3usb3x532_set_mux(const struct usb_mux *me,
-			       mux_state_t mux_state,
-			       bool *ack_required)
-{
-	uint8_t reg = 0;
-
-	/* This driver does not use host command ACKs */
-	*ack_required = false;
-
-	if (mux_state & USB_PD_MUX_USB_ENABLED)
-		reg |= PI3USB3X532_MODE_USB;
-	if (mux_state & USB_PD_MUX_DP_ENABLED)
-		reg |= PI3USB3X532_MODE_DP;
-	if (mux_state & USB_PD_MUX_POLARITY_INVERTED)
-		reg |= PI3USB3X532_BIT_SWAP;
-
-	return pi3usb3x532_write(me, PI3USB3X532_REG_CONTROL,
-				 reg | PI3USB3X532_CTRL_RSVD);
-}
-
-/* Reads control register and updates mux_state accordingly */
-static int pi3usb3x532_get_mux(const struct usb_mux *me,
-			       mux_state_t *mux_state)
-{
-	uint8_t reg = 0;
-	uint8_t res;
-
-	*mux_state = 0;
-	res = pi3usb3x532_read(me, PI3USB3X532_REG_CONTROL, &reg);
-	if (res)
-		return res;
-
-	if (reg & PI3USB3X532_MODE_USB)
-		*mux_state |= USB_PD_MUX_USB_ENABLED;
-	if (reg & PI3USB3X532_MODE_DP)
-		*mux_state |= USB_PD_MUX_DP_ENABLED;
-	if (reg & PI3USB3X532_BIT_SWAP)
-		*mux_state |= USB_PD_MUX_POLARITY_INVERTED;
-
-	return EC_SUCCESS;
-}
-
-const struct usb_mux_driver pi3usb3x532_usb_mux_driver = {
-	.init = pi3usb3x532_init,
-	.set = pi3usb3x532_set_mux,
-	.get = pi3usb3x532_get_mux,
-};