diff options
Diffstat (limited to 'include/driver/accelgyro_bmi260.h')
| -rw-r--r-- | include/driver/accelgyro_bmi260.h | 328 |
1 files changed, 0 insertions, 328 deletions
diff --git a/include/driver/accelgyro_bmi260.h b/include/driver/accelgyro_bmi260.h deleted file mode 100644 index 86c05a0697..0000000000 --- a/include/driver/accelgyro_bmi260.h +++ /dev/null @@ -1,328 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* BMI260 accelerometer and gyro for Chrome EC */ - -#ifndef __CROS_EC_ACCELGYRO_BMI260_H -#define __CROS_EC_ACCELGYRO_BMI260_H - -#include "accelgyro.h" -#include "common.h" -#include "mag_bmm150.h" -#include "driver/accelgyro_bmi260_public.h" - -#define BMI260_CHIP_ID 0x00 -#define BMI260_CHIP_ID_MAJOR 0x27 - -#define BMI260_ERR_REG 0x02 - -#define BMI260_STATUS 0x03 -#define BMI260_AUX_BUSY BIT(2) -#define BMI260_CMD_RDY BIT(4) -#define BMI260_DRDY_AUX BIT(5) -#define BMI260_DRDY_GYR BIT(6) -#define BMI260_DRDY_ACC BIT(7) -#define BMI260_DRDY_OFF(_sensor) (7 - (_sensor)) -#define BMI260_DRDY_MASK(_sensor) (1 << BMI260_DRDY_OFF(_sensor)) - -#define BMI260_AUX_X_L_G 0x04 -#define BMI260_AUX_X_H_G 0x05 -#define BMI260_AUX_Y_L_G 0x06 -#define BMI260_AUX_Y_H_G 0x07 -#define BMI260_AUX_Z_L_G 0x08 -#define BMI260_AUX_Z_H_G 0x09 -#define BMI260_AUX_R_L_G 0x0a -#define BMI260_AUX_R_H_G 0x0b -#define BMI260_ACC_X_L_G 0x0c -#define BMI260_ACC_X_H_G 0x0d -#define BMI260_ACC_Y_L_G 0x0e -#define BMI260_ACC_Y_H_G 0x0f -#define BMI260_ACC_Z_L_G 0x10 -#define BMI260_ACC_Z_H_G 0x11 -#define BMI260_GYR_X_L_G 0x12 -#define BMI260_GYR_X_H_G 0x13 -#define BMI260_GYR_Y_L_G 0x14 -#define BMI260_GYR_Y_H_G 0x15 -#define BMI260_GYR_Z_L_G 0x16 -#define BMI260_GYR_Z_H_G 0x17 - -#define BMI260_SENSORTIME_0 0x18 -#define BMI260_SENSORTIME_1 0x19 -#define BMI260_SENSORTIME_2 0x1a - -#define BMI260_EVENT 0x1b - -/* 2 bytes interrupt reasons*/ -#define BMI260_INT_STATUS_0 0x1c -#define BMI260_SIG_MOTION_OUT BIT(0) -#define BMI260_STEP_COUNTER_OUT BIT(1) -#define BMI260_HIGH_LOW_G_OUT BIT(2) -#define BMI260_TAP_OUT BIT(3) -#define BMI260_FLAT_OUT BIT(4) -#define BMI260_NO_MOTION_OUT BIT(5) -#define BMI260_ANY_MOTION_OUT BIT(6) -#define BMI260_ORIENTATION_OUT BIT(7) - -#define BMI260_INT_STATUS_1 0x1d -#define BMI260_FFULL_INT BIT(0 + 8) -#define BMI260_FWM_INT BIT(1 + 8) -#define BMI260_ERR_INT BIT(2 + 8) -#define BMI260_AUX_DRDY_INT BIT(5 + 8) -#define BMI260_GYR_DRDY_INT BIT(6 + 8) -#define BMI260_ACC_DRDY_INT BIT(7 + 8) - -#define BMI260_INT_MASK 0xFFFF - -#define BMI260_SC_OUT_0 0x1e -#define BMI260_SC_OUT_1 0x1f - -#define BMI260_ORIENT_ACT 0x20 - -#define BMI260_INTERNAL_STATUS 0X21 -#define BMI260_MESSAGE_MASK 0xf -#define BMI260_NOT_INIT 0x00 -#define BMI260_INIT_OK 0x01 -#define BMI260_INIT_ERR 0x02 -#define BMI260_DRV_ERR 0x03 -#define BMI260_SNS_STOP 0x04 -#define BMI260_NVM_ERROR 0x05 -#define BMI260_START_UP_ERROR 0x06 -#define BMI260_COMPAT_ERROR 0x07 - -#define BMI260_TEMPERATURE_0 0x22 -#define BMI260_TEMPERATURE_1 0x23 - -#define BMI260_FIFO_LENGTH_0 0x24 -#define BMI260_FIFO_LENGTH_1 0x25 -#define BMI260_FIFO_LENGTH_MASK (BIT(14) - 1) -#define BMI260_FIFO_DATA 0x26 - -#define BMI260_FEAT_PAGE 0x2f -/* - * The register of feature page should be read/write as 16-bit register - * Otherwise, there can be invalid data - */ -/* Features page 0 */ -#define BMI260_ORIENT_OUT 0x36 -#define BMI260_ORIENT_OUT_PORTRAIT_LANDSCAPE_MASK 3 -#define BMI260_ORIENT_PORTRAIT 0x0 -#define BMI260_ORIENT_LANDSCAPE 0x1 -#define BMI260_ORIENT_PORTRAIT_INVERT 0x2 -#define BMI260_ORIENT_LANDSCAPE_INVERT 0x3 - -/* Features page 1 */ -#define BMI260_GEN_SET_1 0x34 -#define BMI260_GYR_SELF_OFF BIT(9) - -#define BMI260_TAP_1 0x3e -#define BMI260_TAP_1_EN BIT(0) -#define BMI260_TAP_1_SENSITIVITY_OFFSET 1 -#define BMI260_TAP_1_SENSITIVITY_MASK \ - (0x7 << BMI260_TAP_1_SENSITIVITY_OFFSET) - -/* Features page 2 */ -#define BMI260_ORIENT_1 0x30 -#define BMI260_ORIENT_1_EN BIT(0) -#define BMI260_ORIENT_1_UD_EN BIT(1) -#define BMI260_ORIENT_1_MODE_OFFSET 2 -#define BMI260_ORIENT_1_MODE_MASK (0x3 << BMI260_ORIENT_1_MODE_OFFSET) -#define BMI260_ORIENT_1_BLOCK_OFFSET 4 -#define BMI260_ORIENT_1_BLOCK_MASK (0x3 << BMI260_ORIENT_1_BLOCK_OFFSET) -#define BMI260_ORIENT_1_THETA_OFFSET 6 -#define BMI260_ORIENT_1_THETA_MASK \ - ((BIT(6) - 1) << BMI260_ORIENT_1_THETA_OFFSET) - -#define BMI260_ORIENT_2 0x32 -/* hysteresis(10...0) range is 0~1g, default is 128 (0.0625g) */ -#define BMI260_ORIENT_2_HYSTERESIS_MASK (BIT(11) - 1) - -#define BMI260_ACC_CONF 0x40 -#define BMI260_ACC_BW_OFFSET 4 -#define BMI260_ACC_BW_MASK (0x7 << BMI260_ACC_BW_OFFSET) -#define BMI260_FILTER_PERF BIT(7) -#define BMI260_ULP 0x0 -#define BMI260_HP 0x1 - -#define BMI260_ACC_RANGE 0x41 -#define BMI260_GSEL_2G 0x00 -#define BMI260_GSEL_4G 0x01 -#define BMI260_GSEL_8G 0x02 -#define BMI260_GSEL_16G 0x03 - -/* The max positvie value of accel data is 0x7FFF, equal to range(g) */ -/* So, in order to get +1g, divide the 0x7FFF by range */ -#define BMI260_ACC_DATA_PLUS_1G(range) (0x7FFF / (range)) -#define BMI260_ACC_DATA_MINUS_1G(range) (-BMI260_ACC_DATA_PLUS_1G(range)) - -#define BMI260_GYR_CONF 0x42 -#define BMI260_GYR_BW_OFFSET 4 -#define BMI260_GYR_BW_MASK (0x3 << BMI260_GYR_BW_OFFSET) -#define BMI260_GYR_NOISE_PERF BIT(6) - -#define BMI260_GYR_RANGE 0x43 -#define BMI260_DPS_SEL_2000 0x00 -#define BMI260_DPS_SEL_1000 0x01 -#define BMI260_DPS_SEL_500 0x02 -#define BMI260_DPS_SEL_250 0x03 -#define BMI260_DPS_SEL_125 0x04 - -#define BMI260_AUX_CONF 0x44 - -#define BMI260_FIFO_DOWNS 0x45 - -#define BMI260_FIFO_WTM_0 0x46 -#define BMI260_FIFO_WTM_1 0x47 - -#define BMI260_FIFO_CONFIG_0 0x48 -#define BMI260_FIFO_STOP_ON_FULL BIT(0) -#define BMI260_FIFO_TIME_EN BIT(1) - -#define BMI260_FIFO_CONFIG_1 0x49 -#define BMI260_FIFO_TAG_INT1_EN_OFFSET 0 -#define BMI260_FIFO_TAG_INT1_EN_MASK (0x3 << BMI260_FIFO_TAG_INT1_EN_OFFSET) -#define BMI260_FIFO_TAG_INT2_EN_OFFSET 2 -#define BMI260_FIFO_TAG_INT2_EN_MASK (0x3 << BMI260_FIFO_TAG_INT2_EN_OFFSET) -#define BMI260_FIFO_TAG_INT_EDGE 0x0 -#define BMI260_FIFO_TAG_INT_LEVEL 0x1 -#define BMI260_FIFO_TAG_ACC_SAT 0x2 -#define BMI260_FIFO_TAG_GYR_SAT 0x3 -#define BMI260_FIFO_HEADER_EN BIT(4) -#define BMI260_FIFO_AUX_EN BIT(5) -#define BMI260_FIFO_ACC_EN BIT(6) -#define BMI260_FIFO_GYR_EN BIT(7) -#define BMI260_FIFO_SENSOR_EN(_sensor) \ - ((_sensor) == MOTIONSENSE_TYPE_ACCEL ? BMI260_FIFO_ACC_EN : \ - ((_sensor) == MOTIONSENSE_TYPE_GYRO ? BMI260_FIFO_GYR_EN : \ - BMI260_FIFO_AUX_EN)) - -#define BMI260_SATURATION 0x4a - -#define BMI260_AUX_DEV_ID 0x4b -#define BMI260_AUX_I2C_ADDRESS BMI260_AUX_DEV_ID - -#define BMI260_AUX_IF_CONF 0x4c -#define BMI260_AUX_I2C_CONTROL BMI260_AUX_IF_CONF -#define BMI260_AUX_READ_BURST_MASK 3 -#define BMI260_AUX_MAN_READ_BURST_OFF 2 -#define BMI260_AUX_MAN_READ_BURST_MASK (0x3 << BMI280_AUX_MAN_READ_BURST_OFF) -#define BMI260_AUX_READ_BURST_1 0 -#define BMI260_AUX_READ_BURST_2 1 -#define BMI260_AUX_READ_BURST_6 2 -#define BMI260_AUX_READ_BURST_8 3 -#define BMI260_AUX_FCU_WRITE_EN BIT(6) -#define BMI260_AUX_MANUAL_EN BIT(7) - -#define BMI260_AUX_RD_ADDR 0x4d -#define BMI260_AUX_I2C_READ_ADDR BMI260_AUX_RD_ADDR -#define BMI260_AUX_WR_ADDR 0x4e -#define BMI260_AUX_I2C_WRITE_ADDR BMI260_AUX_WR_ADDR -#define BMI260_AUX_WR_DATA 0x4f -#define BMI260_AUX_I2C_WRITE_DATA BMI260_AUX_WR_DATA -#define BMI260_AUX_I2C_READ_DATA BMI260_AUX_X_L_G - -#define BMI260_ERR_REG_MSK 0x52 -#define BMI260_FATAL_ERR BIT(0) -#define BMI260_INTERNAL_ERR_OFF 1 -#define BMI260_INTERNAL_ERR_MASK (0xf << BMI260_INTERNAL_ERR_OFF) -#define BMI260_FIFO_ERR BIT(6) -#define BMI260_AUX_ERR BIT(7) - -#define BMI260_INT1_IO_CTRL 0x53 -#define BMI260_INT1_LVL BIT(1) -#define BMI260_INT1_OD BIT(2) -#define BMI260_INT1_OUTPUT_EN BIT(3) -#define BMI260_INT1_INPUT_EN BIT(4) - -#define BMI260_INT2_IO_CTRL 0x54 -#define BMI260_INT2_LVL BIT(1) -#define BMI260_INT2_OD BIT(2) -#define BMI260_INT2_OUTPUT_EN BIT(3) -#define BMI260_INT2_INPUT_EN BIT(4) - -#define BMI260_INT_LATCH 0x55 -#define BMI260_INT_LATCH_EN BIT(0) - -#define BMI260_INT1_MAP_FEAT 0x56 -#define BMI260_INT2_MAP_FEAT 0x57 -#define BMI260_MAP_SIG_MOTION_OUT BIT(0) -#define BMI260_MAP_STEP_COUNTER_OUT BIT(1) -#define BMI260_MAP_HIGH_LOW_G_OUT BIT(2) -#define BMI260_MAP_TAP_OUT BIT(3) -#define BMI260_MAP_FLAT_OUT BIT(4) -#define BMI260_MAP_NO_MOTION_OUT BIT(5) -#define BMI260_MAP_ANY_MOTION_OUT BIT(6) -#define BMI260_MAP_ORIENTAION_OUT BIT(7) - -#define BMI260_INT_MAP_DATA 0x58 -#define BMI260_MAP_FFULL_INT BIT(0) -#define BMI260_MAP_FWM_INT BIT(1) -#define BMI260_MAP_DRDY_INT BIT(2) -#define BMI260_MAP_ERR_INT BIT(3) -#define BMI260_INT_MAP_DATA_INT1_OFFSET 0 -#define BMI260_INT_MAP_DATA_INT2_OFFSET 4 -#define BMI260_INT_MAP_DATA_REG(_i, _bit) \ - (CONCAT3(BMI260_MAP_, _bit, _INT) << \ - CONCAT3(BMI260_INT_MAP_DATA_INT, _i, _OFFSET)) - -#define BMI260_INIT_CTRL 0x59 -#define BMI260_INIT_ADDR_0 0x5b -#define BMI260_INIT_ADDR_1 0x5c -#define BMI260_INIT_DATA 0x5e -#define BMI260_INTERNAL_ERROR 0x5f -#define BMI260_INT_ERR_1 BIT(1) -#define BMI260_INT_ERR_2 BIT(2) -#define BMI260_FEAT_ENG_DISABLED BIT(4) - -#define BMI260_AUX_IF_TRIM 0x68 -#define BMI260_GYR_CRT_CONF 0x69 - -#define BMI260_NVM_CONF 0x6a -#define BMI260_NVM_PROG_EN BIT(1) - -#define BMI260_IF_CONF 0x6b -#define BMI260_IF_SPI3 BIT(0) -#define BMI260_IF_SPI3_OIS BIT(1) -#define BMI260_IF_OIS_EN BIT(4) -#define BMI260_IF_AUX_EN BIT(5) - -#define BMI260_DRV 0x6c -#define BMI260_ACC_SELF_TEST 0x6d - -#define BMI260_GYR_SELF_TEST_AXES 0x6e - -#define BMI260_NV_CONF 0x70 -#define BMI260_ACC_OFFSET_EN BIT(3) - -#define BMI260_OFFSET_ACC70 0x71 -#define BMI260_OFFSET_GYR70 0x74 -#define BMI260_OFFSET_EN_GYR98 0x77 -#define BMI260_OFFSET_GYRO_EN BIT(6) -#define BMI260_GYR_GAIN_EN BIT(7) - -#define BMI260_PWR_CONF 0x7c -#define BMI260_ADV_POWER_SAVE BIT(0) -#define BMI260_FIFO_SELF_WAKE_UP BIT(1) -#define BMI260_FUP_EN BIT(2) - -#define BMI260_PWR_CTRL 0x7d -#define BMI260_AUX_EN BIT(0) -#define BMI260_GYR_EN BIT(1) -#define BMI260_ACC_EN BIT(2) -#define BMI260_PWR_EN(_sensor_type) BIT(2 - _sensor_type) -#define BMI260_TEMP_EN BIT(3) - -#define BMI260_CMD_REG 0x7e -#define BMI260_CMD_FIFO_FLUSH 0xb0 -#define BMI260_CMD_SOFT_RESET 0xb6 - -#define BMI260_FF_FRAME_LEN_TS 4 -#define BMI260_FF_DATA_LEN_ACC 6 -#define BMI260_FF_DATA_LEN_GYR 6 -#define BMI260_FF_DATA_LEN_MAG 8 - -/* Root mean square noise of 100Hz accelerometer, units: ug */ -#define BMI260_ACCEL_RMS_NOISE_100HZ 1060 - -#endif /* __CROS_EC_ACCELGYRO_BMI260_H */ |