diff options
Diffstat (limited to 'include/driver/als_tcs3400.h')
| -rw-r--r-- | include/driver/als_tcs3400.h | 122 |
1 files changed, 0 insertions, 122 deletions
diff --git a/include/driver/als_tcs3400.h b/include/driver/als_tcs3400.h deleted file mode 100644 index 0078b90442..0000000000 --- a/include/driver/als_tcs3400.h +++ /dev/null @@ -1,122 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * AMS TCS3400 light sensor driver - */ - -#ifndef __CROS_EC_ALS_TCS3400_H -#define __CROS_EC_ALS_TCS3400_H - -#include "driver/als_tcs3400_public.h" - -/* ID for TCS34001 and TCS34005 */ -#define TCS340015_DEVICE_ID 0x90 - -/* ID for TCS34003 and TCS34007 */ -#define TCS340037_DEVICE_ID 0x93 - -/* Register Map */ -#define TCS_I2C_ENABLE 0x80 /* R/W Enables states and interrupts */ -#define TCS_I2C_ATIME 0x81 /* R/W RGBC integration time */ -#define TCS_I2C_WTIME 0x83 /* R/W Wait time */ -#define TCS_I2C_AILTL 0x84 /* R/W Clear irq low threshold low byte */ -#define TCS_I2C_AILTH 0x85 /* R/W Clear irq low threshold high byte */ -#define TCS_I2C_AIHTL 0x86 /* R/W Clear irq high threshold low byte */ -#define TCS_I2C_AIHTH 0x87 /* R/W Clear irq high threshold high byte */ -#define TCS_I2C_PERS 0x8C /* R/W Interrupt persistence filter */ -#define TCS_I2C_CONFIG 0x8D /* R/W Configuration */ -#define TCS_I2C_CONTROL 0x8F /* R/W Gain control register */ -#define TCS_I2C_AUX 0x90 /* R/W Auxiliary control register */ -#define TCS_I2C_REVID 0x91 /* R Revision ID */ -#define TCS_I2C_ID 0x92 /* R Device ID */ -#define TCS_I2C_STATUS 0x93 /* R Device status */ -#define TCS_I2C_CDATAL 0x94 /* R Clear / IR channel low data register */ -#define TCS_I2C_CDATAH 0x95 /* R Clear / IR channel high data register */ -#define TCS_I2C_RDATAL 0x96 /* R Red ADC low data register */ -#define TCS_I2C_RDATAH 0x97 /* R Red ADC high data register */ -#define TCS_I2C_GDATAL 0x98 /* R Green ADC low data register */ -#define TCS_I2C_GDATAH 0x99 /* R Green ADC high data register */ -#define TCS_I2C_BDATAL 0x9A /* R Blue ADC low data register */ -#define TCS_I2C_BDATAH 0x9B /* R Blue ADC high data register */ -#define TCS_I2C_IR 0xC0 /* R/W Access IR Channel */ -#define TCS_I2C_IFORCE 0xE4 /* W Force Interrupt */ -#define TCS_I2C_CICLEAR 0xE6 /* W Clear channel interrupt clear */ -#define TCS_I2C_AICLEAR 0xE7 /* W Clear all interrupts */ - -#define TCS_I2C_ENABLE_POWER_ON BIT(0) -#define TCS_I2C_ENABLE_ADC_ENABLE BIT(1) -#define TCS_I2C_ENABLE_WAIT_ENABLE BIT(3) -#define TCS_I2C_ENABLE_INT_ENABLE BIT(4) -#define TCS_I2C_ENABLE_SLEEP_AFTER_INT BIT(6) -#define TCS_I2C_ENABLE_MASK (TCS_I2C_ENABLE_POWER_ON | \ - TCS_I2C_ENABLE_ADC_ENABLE | \ - TCS_I2C_ENABLE_WAIT_ENABLE | \ - TCS_I2C_ENABLE_INT_ENABLE | \ - TCS_I2C_ENABLE_SLEEP_AFTER_INT) - -enum tcs3400_mode { - TCS3400_MODE_SUSPEND = 0, - TCS3400_MODE_IDLE = (TCS_I2C_ENABLE_POWER_ON | - TCS_I2C_ENABLE_ADC_ENABLE), - TCS3400_MODE_COLLECTING = (TCS_I2C_ENABLE_POWER_ON | - TCS_I2C_ENABLE_ADC_ENABLE | - TCS_I2C_ENABLE_INT_ENABLE), -}; - -#define TCS_I2C_CONTROL_MASK 0x03 -#define TCS_I2C_STATUS_RGBC_VALID BIT(0) -#define TCS_I2C_STATUS_ALS_IRQ BIT(4) -#define TCS_I2C_STATUS_ALS_SATURATED BIT(7) - -#define TCS_I2C_AUX_ASL_INT_ENABLE BIT(5) - -/* Light data resides at 0x94 thru 0x98 */ -#define TCS_DATA_START_LOCATION TCS_I2C_CDATAL -#define TCS_CLEAR_DATA_SIZE 2 -#define TCS_RGBC_DATA_SIZE 8 - -#define TCS3400_DRV_DATA(_s) ((struct als_drv_data_t *)(_s)->drv_data) -#define TCS3400_RGB_DRV_DATA(_s) \ - ((struct tcs3400_rgb_drv_data_t *)(_s)->drv_data) - -/* - * Factor to multiply light value by to determine if an increase in gain - * would cause the next value to saturate. - * - * On the TCS3400, gain increases 4x each time again register setting is - * incremented. However, I see cases where values that are 24% of saturation - * go into saturation after increasing gain, causing a back-and-forth cycle to - * occur : - * - * [134.654994 tcs3400_adjust_sensor_for_saturation value=65535 100% Gain=2 ] - * [135.655064 tcs3400_adjust_sensor_for_saturation value=15750 24% Gain=1 ] - * [136.655107 tcs3400_adjust_sensor_for_saturation value=65535 100% Gain=2 ] - * - * To avoid this, we require value to be <= 20% of saturation level - * (TCS_GAIN_SAT_LEVEL) before allowing gain to be increased. - */ -#define TCS_GAIN_ADJUST_FACTOR 5 -#define TCS_GAIN_SAT_LEVEL (TCS_SATURATION_LEVEL / TCS_GAIN_ADJUST_FACTOR) -#define TCS_UPSHIFT_FACTOR_N 25 /* upshift factor = 2.5 */ -#define TCS_UPSHIFT_FACTOR_D 10 -#define TCS_GAIN_UPSHIFT_LEVEL (TCS_SATURATION_LEVEL * TCS_UPSHIFT_FACTOR_D \ - / TCS_UPSHIFT_FACTOR_N) - -/* - * Percentage of saturation level that the auto-adjusting anti-saturation - * method will drive towards. - */ -#define TSC_SATURATION_LOW_BAND_PERCENT 90 -#define TSC_SATURATION_LOW_BAND_LEVEL (TCS_SATURATION_LEVEL * \ - TSC_SATURATION_LOW_BAND_PERCENT / 100) - -enum crbg_index { - CLEAR_CRGB_IDX = 0, - RED_CRGB_IDX, - GREEN_CRGB_IDX, - BLUE_CRGB_IDX, - CRGB_COUNT, -}; - -#endif /* __CROS_EC_ALS_TCS3400_H */ |