diff options
Diffstat (limited to 'power/rk3288.c')
| -rw-r--r-- | power/rk3288.c | 47 |
1 files changed, 21 insertions, 26 deletions
diff --git a/power/rk3288.c b/power/rk3288.c index 851a8b4e9d..e4e4ac9d69 100644 --- a/power/rk3288.c +++ b/power/rk3288.c @@ -1,4 +1,4 @@ -/* Copyright 2013 The Chromium OS Authors. All rights reserved. +/* Copyright 2013 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -24,8 +24,9 @@ */ #include "battery.h" +#include "builtin/assert.h" #include "charge_state.h" -#include "chipset.h" /* This module implements chipset functions too */ +#include "chipset.h" /* This module implements chipset functions too */ #include "clock.h" #include "common.h" #include "console.h" @@ -43,14 +44,14 @@ /* Console output macros */ #define CPUTS(outstr) cputs(CC_CHIPSET, outstr) -#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) +#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ##args) /* masks for power signals */ #define IN_POWER_GOOD POWER_SIGNAL_MASK(RK_POWER_GOOD) #define IN_SUSPEND POWER_SIGNAL_MASK(RK_SUSPEND_ASSERTED) /* Long power key press to force shutdown */ -#define DELAY_FORCE_SHUTDOWN (8 * SECOND) +#define DELAY_FORCE_SHUTDOWN (8 * SECOND) /* * If the power key is pressed to turn on, then held for this long, we @@ -60,7 +61,7 @@ * into the inner loop, waiting for next event to occur (power button * press or power good == 0). */ -#define DELAY_SHUTDOWN_ON_POWER_HOLD (8 * SECOND) +#define DELAY_SHUTDOWN_ON_POWER_HOLD (8 * SECOND) /* * The hold time for pulling down the PMIC_WARM_RESET_L pin so that @@ -101,11 +102,9 @@ enum power_request_t { static enum power_request_t power_request; - /* Forward declaration */ static void chipset_turn_off_power_rails(void); - /** * Set the PMIC WARM RESET signal. * @@ -117,7 +116,6 @@ static void set_pmic_warm_reset(int asserted) gpio_set_level(GPIO_PMIC_WARM_RESET_L, asserted ? 0 : 1); } - /** * Set the PMIC PWRON signal. * @@ -161,7 +159,7 @@ static int check_for_power_off_event(void) pressed = 1; } else if (power_request == POWER_REQ_OFF) { power_request = POWER_REQ_NONE; - return 4; /* return non-zero for shudown down */ + return 4; /* return non-zero for shudown down */ } now = get_time(); @@ -294,13 +292,11 @@ static int check_for_power_on_event(void) /* check if system is already ON */ if (power_get_signals() & IN_POWER_GOOD) { if (ap_off_flag) { - CPRINTS( - "system is on, but " + CPRINTS("system is on, but " "EC_RESET_FLAG_AP_OFF is on"); return 0; } else { - CPRINTS( - "system is on, thus clear " + CPRINTS("system is on, thus clear " "auto_power_on"); /* no need to arrange another power on */ auto_power_on = 0; @@ -391,7 +387,7 @@ void chipset_reset(enum chipset_shutdown_reason reason) report_ap_reset(reason); CPRINTS("assert GPIO_PMIC_WARM_RESET_L for %d ms", - PMIC_WARM_RESET_L_HOLD_TIME / MSEC); + PMIC_WARM_RESET_L_HOLD_TIME / MSEC); set_pmic_warm_reset(1); usleep(PMIC_WARM_RESET_L_HOLD_TIME); set_pmic_warm_reset(0); @@ -437,16 +433,17 @@ enum power_state power_handle_state(enum power_state state) if (power_wait_signals(IN_POWER_GOOD) == EC_SUCCESS) { CPRINTS("POWER_GOOD seen"); if (power_button_wait_for_release( - DELAY_SHUTDOWN_ON_POWER_HOLD) == - EC_SUCCESS) { + DELAY_SHUTDOWN_ON_POWER_HOLD) == + EC_SUCCESS) { power_button_was_pressed = 0; set_pmic_pwron(0); /* setup misc gpio for S3/S0 functionality */ - gpio_set_flags(GPIO_SUSPEND_L, GPIO_INPUT - | GPIO_INT_BOTH | GPIO_PULL_DOWN); - gpio_set_flags(GPIO_EC_INT_L, GPIO_OUTPUT - | GPIO_OUT_HIGH); + gpio_set_flags(GPIO_SUSPEND_L, + GPIO_INPUT | GPIO_INT_BOTH | + GPIO_PULL_DOWN); + gpio_set_flags(GPIO_EC_INT_L, + GPIO_OUTPUT | GPIO_OUT_HIGH); /* Call hooks now that AP is running */ hook_notify(HOOK_CHIPSET_STARTUP); @@ -521,7 +518,7 @@ static void powerbtn_rockchip_changed(void) task_wake(TASK_ID_CHIPSET); } DECLARE_HOOK(HOOK_POWER_BUTTON_CHANGE, powerbtn_rockchip_changed, - HOOK_PRIO_DEFAULT); + HOOK_PRIO_DEFAULT); /*****************************************************************************/ /* Console debug command */ @@ -542,14 +539,14 @@ enum power_state_t { PSTATE_COUNT, }; -static const char * const state_name[] = { +static const char *const state_name[] = { "unknown", "off", "suspend", "on", }; -static int command_power(int argc, char **argv) +static int command_power(int argc, const char **argv) { int v; @@ -577,6 +574,4 @@ static int command_power(int argc, char **argv) return EC_SUCCESS; } -DECLARE_CONSOLE_COMMAND(power, command_power, - "on/off", - "Turn AP power on/off"); +DECLARE_CONSOLE_COMMAND(power, command_power, "on/off", "Turn AP power on/off"); |