1 files changed, 0 insertions, 113 deletions
diff --git a/test/fan.c b/test/fan.c
deleted file mode 100644
index d03aa0213c..0000000000
--- a/test/fan.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/* Copyright 2014 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Test thermal engine.
- */
-
-#include "common.h"
-#include "console.h"
-#include "fan.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "printf.h"
-#include "temp_sensor.h"
-#include "test_util.h"
-#include "thermal.h"
-#include "timer.h"
-#include "util.h"
-
-#define FAN_RPM(fan)	fans[fan].rpm
-
-/*****************************************************************************/
-/* Tests */
-
-void set_thermal_control_enabled(int fan, int enable);
-
-static int test_fan(void)
-{
-	/* "actual" fan speed from board/host/fan.c */
-	extern int mock_rpm;
-
-	sleep(2);
-
-	/* Fans initialize disabled. */
-	TEST_ASSERT(fan_get_rpm_actual(0) == 0);
-
-	set_thermal_control_enabled(0, 1);
-
-	/*
-	 * fan_set_percent_needed() is normally called once a second by the
-	 * thermal task, but we're not using a thermal test in this test so
-	 * we can dink around with the fans without having to wait. The host
-	 * implementation just sets mock_rpm to whatever it's asked for.
-	 */
-
-	/* Off */
-	fan_set_percent_needed(0, 0);
-	TEST_ASSERT(fan_get_rpm_actual(0) == 0);
-	fan_set_percent_needed(0, 0);
-	TEST_ASSERT(fan_get_rpm_actual(0) == 0);
-
-	/* On, but just barely */
-	fan_set_percent_needed(0, 1);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_start);
-	/* fan is above min speed now, so should be set to min */
-	fan_set_percent_needed(0, 1);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_min);
-
-	/* Full speed */
-	fan_set_percent_needed(0, 100);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_max);
-	fan_set_percent_needed(0, 100);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_max);
-
-	/* Slow again */
-	fan_set_percent_needed(0, 1);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_min);
-	fan_set_percent_needed(0, 1);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_min);
-
-	/* Off */
-	fan_set_percent_needed(0, 0);
-	TEST_ASSERT(fan_get_rpm_actual(0) == 0);
-	fan_set_percent_needed(0, 0);
-	TEST_ASSERT(fan_get_rpm_actual(0) == 0);
-
-	/* On, but just barely */
-	fan_set_percent_needed(0, 1);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_start);
-	/* Force the mock_rpm to be slow, to simulate dragging */
-	mock_rpm = FAN_RPM(0)->rpm_min - 105;
-	/* It should keep trying for the start speed */
-	fan_set_percent_needed(0, 1);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_start);
-	/* But we have to keep forcing the mock_rpm back down */
-	mock_rpm = FAN_RPM(0)->rpm_min - 105;
-	fan_set_percent_needed(0, 1);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_start);
-	/* Now let it turn just under rpm_min. Should be okay there. */
-	mock_rpm = FAN_RPM(0)->rpm_min - 10;
-	fan_set_percent_needed(0, 1);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_min);
-	/* Let it go a little faster, still okay */
-	mock_rpm = FAN_RPM(0)->rpm_min + 10;
-	fan_set_percent_needed(0, 1);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_min);
-	/* But if it drops too low, it should go back to the start speed */
-	mock_rpm = FAN_RPM(0)->rpm_min - 105;
-	fan_set_percent_needed(0, 1);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_start);
-	/* And then relax */
-	fan_set_percent_needed(0, 1);
-	TEST_ASSERT(fan_get_rpm_actual(0) == FAN_RPM(0)->rpm_min);
-
-	return EC_SUCCESS;
-}
-
-void run_test(int argc, char **argv)
-{
-	RUN_TEST(test_fan);
-
-	test_print_result();
-}