diff options
Diffstat (limited to 'zephyr/Kconfig.temperature')
| -rw-r--r-- | zephyr/Kconfig.temperature | 65 |
1 files changed, 0 insertions, 65 deletions
diff --git a/zephyr/Kconfig.temperature b/zephyr/Kconfig.temperature deleted file mode 100644 index 4af5aa99f8..0000000000 --- a/zephyr/Kconfig.temperature +++ /dev/null @@ -1,65 +0,0 @@ -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -menuconfig PLATFORM_EC_TEMP_SENSOR - bool "Temperature sensors" - help - Support for temperature sensors. Once enabled, "temps" console - command and EC_CMD_TEMP_SENSOR_GET_INFO host command are available. - -if PLATFORM_EC_TEMP_SENSOR - -config PLATFORM_EC_DPTF - bool "Dynamic Platform and Thermal Framework" - default y if PLATFORM_EC_ACPI - help - Enables the Dynamic Platform and Thermal Framework (DPTF). DPTF - exposes the temperature sensors and the fan controls to the - Applicaiton Processor (AP) using Advanced Configuration and Power - Interface (ACPI). This permits the AP to control thermal management - independent of the EC. - - Even when DPTF is enabled, the EC still monitors temperature sensors - and will take corrective actions for high temperatures such as turning - on the fans or powering down the AP. - -config PLATFORM_EC_THERMISTOR - bool "Thermistor support" - depends on PLATFORM_EC_ADC - help - Enables support for thermistors (resistor whose resistance is - strongly dependent on temperature) as temperature-sensor type. - -endif # PLATFORM_EC_TEMP_SENSOR - - -config PLATFORM_EC_TEMP_SENSOR_FIRST_READ_DELAY - bool "Enable a delay before reading temperature seensors" - help - Enables a delay on the first read of temperature sensors after - the EC powers on. This allows for setting of any power rails that - control the temperature sensors on the platform. - -if PLATFORM_EC_TEMP_SENSOR_FIRST_READ_DELAY - -config PLATFORM_EC_TEMP_SENSOR_FIRST_READ_DELAY_MS - int "Temperature sensor read delay time" - default 500 - help - Sets the delay time, in milliseconds, before the first the EC will - read any temperature sensors and perform any thermal management. - -endif # PLATFORM_EC_TEMP_SENSOR_FIRST_READ_DELAY - -config PLATFORM_EC_FAN - bool "Fan support" - depends on PLATFORM_EC_PWM - help - Enables support for fans. Allows periodic thermal task to - automatically set the fan speed (control temperature). - Once enabled fanduty, fanset, faninfo, fanauto consol command and - EC_CMD_PWM_GET_FAN_TARGET_RPM, EC_CMD_PWM_SET_FAN_TARGET_RPM, - EC_CMD_PWM_SET_FAN_DUTY, EC_CMD_THERMAL_AUTO_FAN_CTRL are - available. Also enables a periodic task (1s) to verify fan is - running (is not stalled). |