diff options
Diffstat (limited to 'zephyr/Kconfig')
| -rw-r--r-- | zephyr/Kconfig | 63 |
1 files changed, 23 insertions, 40 deletions
diff --git a/zephyr/Kconfig b/zephyr/Kconfig index 6b0a512328..f4d274ca1d 100644 --- a/zephyr/Kconfig +++ b/zephyr/Kconfig @@ -8,7 +8,6 @@ rsource "emul/Kconfig" rsource "fake/Kconfig" rsource "mock/Kconfig" rsource "subsys/Kconfig" -rsource "subsys/emul/Kconfig" if ZTEST @@ -333,14 +332,6 @@ config PLATFORM_EC_EXTPOWER_GPIO project should define a GPIO pin named GPIO_AC_PRESENT, with extpower_interrupt configured as the handler. -config PLATFORM_EC_EXTPOWER_DEBOUNCE_MS - int "Debounce time for external power signal" - default 30 - help - Enable external power signal debounce time. Extend the - debounce time to ensure that the external power signal can - supply stable power. - config PLATFORM_EC_FLASH_CROS bool help @@ -349,6 +340,16 @@ config PLATFORM_EC_FLASH_CROS e.g. to support auto-update. Various write-protection features are also provided. +config PLATFORM_EC_FPU + bool "Support floating point" + depends on FPU && (CPU_CORTEX_M || RISCV) && !NEWLIB_LIBC + default y + help + This enables support for floating point. This is generally already + provided in Zephyr, but the EC side expects a few functions to be + available which are not available with Zephyr's minimal lib: sqrtf() + and fabsf(). Enabling this options defines them. + config PLATFORM_EC_HOOKS bool "Hooks and deferred compatibility shim" default y @@ -455,14 +456,6 @@ config PLATFORM_EC_POWER_COMMON help Compile common code for AP power state machine. -config CROS_EC_POWER_SIGNAL_LIST - bool "Define the power signal list from the devicetree" - default y - depends on $(dt_nodelabel_enabled,power_signal_list) - help - Define the global power_signal_list[] from the devicetree. Requires a - node with nodelabel power_signal_list. - config PLATFORM_EC_MKBP_EVENT bool "MKBP event" help @@ -551,7 +544,6 @@ config PLATFORM_EC_PWM_DISPLIGHT bool "PWM display backlight" default y depends on DT_HAS_CROS_EC_DISPLIGHT_ENABLED - select PWM select PLATFORM_EC_PWM_HC help Enables display backlight controlled by a PWM signal connected @@ -599,7 +591,7 @@ endchoice # PLATFORM_EC_SHA256_MODE config PLATFORM_EC_SHA256_UNROLLED bool "Manually unroll sha256 transform" - depends on PLATFORM_EC_SHA256_SW + depends on PLATFORM_EC_SHA25_SW default n help Enable loop unroll to improve the performance of sha256 software @@ -622,17 +614,25 @@ config PLATFORM_EC_SWITCH This also enables the "mmapinfo" console command to report the current state of all switches. +choice PLATFORM_EC_SWITCHCAP_TYPE + prompt "Enable switchcap support" + optional + help + Enable support for switchcap used to power on the AP. + If enabled, type of switchcap must be selected and node in device + tree must be added that describes the driver and pins used to control + the switchcap. + config PLATFORM_EC_SWITCHCAP_GPIO bool "GPIO controlled switchcap" - default y - depends on DT_HAS_CROS_EC_SWITCHCAP_GPIO_ENABLED help Enable support for the GPIO controlled switchcap. Pins used for controlling the switchcap must be defined in board's device tree. config PLATFORM_EC_SWITCHCAP_LN9310 - bool "LN9310 switchcap common code" + bool "LN9310 switchcap driver" + depends on PLATFORM_EC_I2C help Enable support for the LION Semiconductor LN9310 switched capacitor converter. This will export definitions for @@ -640,14 +640,7 @@ config PLATFORM_EC_SWITCHCAP_LN9310 project-specific code should call appropriately if there's no switchcap node in device tree. -config CROS_EC_SWITCHCAP_LN9310 - bool "LN9310 switchcap generic driver" - default y - depends on DT_HAS_LION_LN9310_ENABLED - help - Enable support for the generic driver for the LION Semiconductor - LN9310 switched capacitor converter. This requires a lion,ln9310 node - to be defined. +endchoice config PLATFORM_EC_SYSTEM_UNLOCKED bool "System unlocked: allow dangerous commands while in development" @@ -807,14 +800,4 @@ config PLATFORM_EC_MATH_UTIL Math utilities including bitmask manipulation, division rounding, trigonometric function, etc. -config PLATFORM_EC_GPIO_ID - bool "Enable GPIO ID handling for board and sku ids" - default y - depends on DT_HAS_CROS_EC_GPIO_ID_ENABLED - help - Enable setting board and sku IDs using GPIOs. Defines the - board_get_sku_id and board_get_version functions based on the - devicetree node using the known nodelabels gpio_id_sku and - gpio_id_board. - endif # PLATFORM_EC |