1 files changed, 0 insertions, 85 deletions
diff --git a/zephyr/dts/bindings/battery/battery-fuel-gauge.yaml b/zephyr/dts/bindings/battery/battery-fuel-gauge.yaml
deleted file mode 100644
index 2572090024..0000000000
--- a/zephyr/dts/bindings/battery/battery-fuel-gauge.yaml
+++ /dev/null
@@ -1,85 +0,0 @@
-# Copyright 2021 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-
-description: |
-   Battery fuel gauge parameters
-
-compatible: "battery-fuel-gauge"
-
-properties:
-   manuf_name:
-      description: Manufacturer name
-      type: string
-   device_name:
-      description: Model/Device name
-      type: string
-   ship_mode_wb_support:
-      description: |
-         Write Block support. If this is true, then i2c write block command
-         will be used instead of a 16-bit write
-         Value must be either 0 or 1.
-      type: int
-   ship_mode_reg_addr:
-      description: |
-         Address of register responsible for enabling ship mode.
-      type: int
-   ship_mode_reg_data:
-      description: |
-         Values written to register to enable ship mode.
-      type: array
-   sleep_mode_support:
-      description: |
-         Defines if battery support fuel gauge sleep command.
-         Value must be either 0 or 1.
-      type: int
-   sleep_mode_reg_addr:
-      description: |
-         Defines address where command will be sent to go into sleep mode.
-      type: int
-   sleep_mode_reg_data:
-      description: |
-         Defines value which will be sent to register to go into sleep mode.
-      type: int
-   fet_mfgacc_support:
-      description: |
-         Defines if battery supports manufacturer access command.
-         If enabled, FET status is read using the ManufacturerBlockAccess (0x44)
-         to read the OperationStatus (0x54) register.
-         The fet_reg_mask and fet_disconnect_val properties must still be
-         defined.
-         Value must be either 0 or 1.
-      type: int
-   fet_reg_addr:
-      description: |
-         Address of register which reports charging and discharging FETs status.
-         This property is ignored if fet_mfgacc_support is true.
-      type: int
-   fet_reg_mask:
-      description: |
-         Mask which determines which bit in status value contains the
-         discharge FET status.
-      type: int
-   fet_disconnect_val:
-      description: |
-         Value that describes which bits must be set to determine that
-         discharge FET has disconnected the battery.
-      type: int
-   fet_cfet_mask:
-      description: |
-         Mask which determines which bit in status value contains the
-         charge FET status. If this value is 0, this means there's
-         no charge FET.
-      type: int
-   fet_cfet_off_val:
-      description: |
-         Value that describes which bits must be set to determine that
-         charge FET has disconnected the battery.
-      type: int
-   imbalance_mv:
-      description: |
-         This property is used only if
-         CONFIG_PLATFORM_EC_BATTERY_MEASURE_IMBALANCE is enabled.
-         It should be an enum and its value should be a name of function
-         which will be assigned to imbalance_mv pointer.
-      type: string