diff options
Diffstat (limited to 'zephyr/dts/bindings/emul/zephyr,smart-battery.yaml')
| -rw-r--r-- | zephyr/dts/bindings/emul/zephyr,smart-battery.yaml | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/zephyr/dts/bindings/emul/zephyr,smart-battery.yaml b/zephyr/dts/bindings/emul/zephyr,smart-battery.yaml new file mode 100644 index 0000000000..4c46fd4f64 --- /dev/null +++ b/zephyr/dts/bindings/emul/zephyr,smart-battery.yaml @@ -0,0 +1,161 @@ +# Copyright 2021 The ChromiumOS Authors +# Use of this source code is governed by a BSD-style license that can be +# found in the LICENSE file. + +description: Zephyr Smart Battery Emulator + +compatible: "zephyr,smart-battery" + +include: base.yaml + +properties: + mf-access: + type: int + required: false + default: 0 + description: Word returned on manufacturer access command. + + at-rate-full-mw-support: + type: boolean + description: + Flag indicating if AT_RATE_TIME_TO_FULL command supports mW capacity + mode. + + version: + type: string + required: false + enum: + - BATTERY_SPEC_VER_1_0 + - BATTERY_SPEC_VER_1_1 + - BATTERY_SPEC_VER_1_1_WITH_PEC + default: BATTERY_SPEC_VER_1_1_WITH_PEC + description: Version of Smart Battery. + + vscale: + type: int + required: false + default: 0 + description: Scaling of voltage. + + ipscale: + type: int + required: false + default: 0 + description: Scaling of current. + + int-charge-controller: + type: boolean + description: Flag indicating if internal charge controller is supported. + + primary-battery: + type: boolean + description: + Flag indicating if primary battery role selection is supported. + + design-mv: + type: int + required: false + default: 5000 + description: Design battery voltage in mV. + + design-cap: + type: int + required: false + default: 5000 + description: Design battery capacity in mAh. + + temperature: + type: int + required: false + default: 2930 + description: Battery temperature in 0.1 Kelvins. + + volt: + type: int + required: false + default: 5000 + description: Battery voltage in mV. + + cur: + type: int + required: false + default: 1000 + description: Current charging (> 0) or discharging (< 0) battery in mA. + + avg-cur: + type: int + required: false + default: 1000 + description: Average current from 1 minute. + + max-error: + type: int + required: false + default: 0 + description: Maximum error of commands return value in percent. + + cap: + type: int + required: false + default: 2000 + description: Capacity of the battery in mAh. + + full-cap: + type: int + required: false + default: 4000 + description: Full capacity of the battery in mAh. + + desired-charg-cur: + type: int + required: false + default: 2000 + description: Charging current requested by battery. + + desired-charg-volt: + type: int + required: false + default: 7000 + description: Charging voltage requested by battery. + + cycle-count: + type: int + required: false + default: 125 + description: Number of cycles. + + serial-number: + type: int + required: false + default: 7 + description: Serial number of battery. + + mf-name: + type: string + required: false + default: "zephyr" + description: Manufacturer name. Length has to be smaller than 32 bytes. + + dev-name: + type: string + required: false + default: "smartbat" + description: Device name. Length has to be smaller than 32 bytes. + + dev-chem: + type: string + required: false + default: "LION" + description: Device chemistry. Length has to be smaller than 32 bytes. + + mf-data: + type: string + required: false + default: "LION" + description: Manufacturer data. Length has to be smaller than 32 bytes. + + mf-info: + type: string + required: false + default: "LION" + description: Manufacturer info. Length has to be smaller than 32 bytes. |