diff options
Diffstat (limited to 'zephyr/program/brya/i2c.dts')
| -rw-r--r-- | zephyr/program/brya/i2c.dts | 284 |
1 files changed, 0 insertions, 284 deletions
diff --git a/zephyr/program/brya/i2c.dts b/zephyr/program/brya/i2c.dts deleted file mode 100644 index 8de12cdb5e..0000000000 --- a/zephyr/program/brya/i2c.dts +++ /dev/null @@ -1,284 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - - #include <dt-bindings/usb_pd_tcpm.h> - -/ { - named-i2c-ports { - compatible = "named-i2c-ports"; - i2c_sensor: sensor { - i2c-port = <&i2c0_0>; - enum-names = "I2C_PORT_SENSOR"; - }; - tcpc0_2: tcpc0_2 { - i2c-port = <&i2c1_0>; - enum-names = "I2C_PORT_USB_C0_C2_TCPC"; - }; - tcpc1: tcpc1 { - i2c-port = <&i2c4_1>; - enum-names = "I2C_PORT_USB_C1_TCPC"; - dynamic-speed; - }; - c0_c2_bc12: c0_c2_bc12 { - i2c-port = <&i2c2_0>; - enum-names = "I2C_PORT_USB_C0_C2_PPC", - "I2C_PORT_USB_C0_C2_BC12"; - }; - c1_bc12: c1_bc12 { - i2c-port = <&i2c6_1>; - enum-names = "I2C_PORT_USB_C1_PPC", - "I2C_PORT_USB_C1_BC12"; - dynamic-speed; - }; - retimer0_2: retimer0_2 { - i2c-port = <&i2c3_0>; - enum-names = "I2C_PORT_USB_C0_C2_MUX"; - }; - battery { - i2c-port = <&i2c5_0>; - enum-names = "I2C_PORT_BATTERY"; - }; - i2c_charger: charger { - i2c-port = <&i2c7_0>; - enum-names = "I2C_PORT_CHARGER", - "I2C_PORT_EEPROM", - "I2C_PORT_MP2964"; - }; - }; -}; - -&i2c0_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST>; - pinctrl-0 = <&i2c0_0_sda_scl_gpb4_b5>; - pinctrl-names = "default"; -}; - -&i2c_ctrl0 { - status = "okay"; -}; - -&i2c1_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - pinctrl-0 = <&i2c1_0_sda_scl_gp87_90>; - pinctrl-names = "default"; - - tcpc_port0: nct38xx@70 { - compatible = "nuvoton,nct38xx"; - reg = <0x70>; - gpio-dev = <&nct3808_0_P1>; - tcpc-flags = <( - TCPC_FLAGS_TCPCI_REV2_0 | - TCPC_FLAGS_NO_DEBUG_ACC_CONTROL)>; - }; - - nct3808_0_P1: nct3808_0_P1@70 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nuvoton,nct38xx-gpio"; - reg = <0x70>; - label = "NCT3808_0_P1"; - - ioex_port1: gpio@0 { - compatible = "nuvoton,nct38xx-gpio-port"; - reg = <0x0>; - label = "NCT3808_0_P1_GPIO0"; - gpio-controller; - #gpio-cells = <2>; - ngpios = <8>; - pin_mask = <0xdc>; - pinmux_mask = <0xff>; - }; - }; - - tcpc_port2: nct38xx@74 { - compatible = "nuvoton,nct38xx"; - reg = <0x74>; - gpio-dev = <&nct3808_0_P2>; - tcpc-flags = <(TCPC_FLAGS_TCPCI_REV2_0)>; - }; - - nct3808_0_P2: nct3808_0_P2@74 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nuvoton,nct38xx-gpio"; - reg = <0x74>; - label = "NCT3808_0_P2"; - - ioex_port2: gpio@0 { - compatible = "nuvoton,nct38xx-gpio-port"; - reg = <0x0>; - label = "NCT3808_0_P2_GPIO0"; - gpio-controller; - #gpio-cells = <2>; - ngpios = <8>; - pin_mask = <0xdc>; - pinmux_mask = <0xff>; - }; - }; - - nct3808_alert_1 { - compatible = "nuvoton,nct38xx-gpio-alert"; - irq-gpios = <&gpioe 0 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; - nct38xx-dev = <&nct3808_0_P1 &nct3808_0_P2>; - label = "NCT3808_ALERT_1"; - }; -}; - -&i2c_ctrl1 { - status = "okay"; -}; - -&i2c2_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - pinctrl-0 = <&i2c2_0_sda_scl_gp91_92>; - pinctrl-names = "default"; - - ppc_port0: syv682x@40 { - compatible = "silergy,syv682x"; - status = "okay"; - reg = <0x40>; - frs_en_gpio = <&usb_c0_frs_en>; - }; - - bc12_port0: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - irq = <&int_usb_c0_bc12>; - }; - - ppc_port2: syv682x@42 { - compatible = "silergy,syv682x"; - status = "okay"; - reg = <0x42>; - frs_en_gpio = <&usb_c2_frs_en>; - }; - - bc12_port2: pi3usb9201@5d { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5d>; - irq = <&int_usb_c2_bc12>; - }; -}; - -&i2c_ctrl2 { - status = "okay"; -}; - -&i2c3_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST_PLUS>; - pinctrl-0 = <&i2c3_0_sda_scl_gpd0_d1>; - pinctrl-names = "default"; - - usb_c0_bb_retimer: jhl8040r-c0@56 { - compatible = "intel,jhl8040r"; - reg = <0x56>; - int-pin = <&usb_c0_rt_int_odl>; - reset-pin = <&usb_c0_rt_rst_odl>; - }; - - usb_c2_bb_retimer: jhl8040r-c2@57 { - compatible = "intel,jhl8040r"; - reg = <0x57>; - int-pin = <&usb_c2_rt_int_odl>; - reset-pin = <&usb_c2_rt_rst_odl>; - }; -}; - -&i2c_ctrl3 { - status = "okay"; -}; - -&i2c4_1 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST>; - pinctrl-0 = <&i2c4_1_sda_scl_gpf2_f3>; - pinctrl-names = "default"; - - tcpc_port1: ps8xxx@b { - compatible = "parade,ps8xxx"; - reg = <0xb>; - tcpc-flags = <( - TCPC_FLAGS_TCPCI_REV2_0 | - TCPC_FLAGS_TCPCI_REV2_0_NO_VSAFE0V | - TCPC_FLAGS_CONTROL_VCONN | - TCPC_FLAGS_CONTROL_FRS)>; - }; -}; - -&i2c_ctrl4 { - status = "okay"; -}; - -&i2c5_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_STANDARD>; - pinctrl-0 = <&i2c5_0_sda_scl_gp33_36>; - pinctrl-names = "default"; -}; - -&i2c_ctrl5 { - status = "okay"; -}; - -&i2c6_1 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST>; - pinctrl-0 = <&i2c6_1_sda_scl_gpe3_e4>; - pinctrl-names = "default"; - - ppc_port1: nx20p348x@72 { - compatible = "nxp,nx20p348x"; - status = "okay"; - reg = <0x72>; - }; - - bc12_port1: pi3usb9201@5f { - compatible = "pericom,pi3usb9201"; - status = "okay"; - reg = <0x5f>; - irq = <&int_usb_c1_bc12>; - }; -}; - -&i2c_ctrl6 { - status = "okay"; -}; - -&i2c7_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_FAST>; - pinctrl-0 = <&i2c7_0_sda_scl_gpb2_b3>; - pinctrl-names = "default"; - - pmic_mp2964@20 { - compatible = "mps,mp2964"; - reg = <0x20>; - }; - - charger: bq25710@9 { - compatible = "ti,bq25710"; - status = "okay"; - reg = <0x9>; - }; - - cbi_eeprom: eeprom@50 { - compatible = "atmel,at24"; - reg = <0x50>; - size = <2048>; - pagesize = <16>; - address-width = <8>; - timeout = <5>; - }; -}; - -&i2c_ctrl7 { - status = "okay"; -}; |