diff options
Diffstat (limited to 'zephyr/program/nissa/program.conf')
| -rw-r--r-- | zephyr/program/nissa/program.conf | 145 |
1 files changed, 0 insertions, 145 deletions
diff --git a/zephyr/program/nissa/program.conf b/zephyr/program/nissa/program.conf deleted file mode 100644 index ade406671a..0000000000 --- a/zephyr/program/nissa/program.conf +++ /dev/null @@ -1,145 +0,0 @@ -# Copyright 2021 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -# Core EC configuration: build the EC application, using ECOS shims -# (which are currently required for a number of features). -CONFIG_CROS_EC=y -CONFIG_PLATFORM_EC=y -CONFIG_SHIMMED_TASKS=y -CONFIG_LTO=y - -# RAM-saving options -# flash shell command is unused, allocated a 4kB buffer for flash test -CONFIG_FLASH_SHELL=n -# EC default 1kB buffer seems unnecessarily large, Zephyr default is 8 bytes -CONFIG_SHELL_BACKEND_SERIAL_TX_RING_BUFFER_SIZE=128 - -# Standard shimmed features -CONFIG_PLATFORM_EC_BACKLIGHT_LID=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_SYSINFO=y -CONFIG_PLATFORM_EC_EEPROM_CBI_WP=y -CONFIG_PLATFORM_EC_LID_SWITCH=y -CONFIG_PLATFORM_EC_POWER_BUTTON=y -CONFIG_PLATFORM_EC_SWITCH=y -CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y -CONFIG_PLATFORM_EC_TABLET_MODE=y -CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=y -CONFIG_PLATFORM_EC_VBOOT_EFS2=y -CONFIG_PLATFORM_EC_VBOOT_HASH=y - -# Application processor; communicates with EC via eSPI -CONFIG_AP=y -CONFIG_AP_X86_INTEL_ADL=y -CONFIG_ESPI=y -CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S4=y -CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S5=y -CONFIG_PLATFORM_EC_HOSTCMD=y -CONFIG_HCDEBUG_OFF=y -CONFIG_PLATFORM_EC_THROTTLE_AP=y -CONFIG_PLATFORM_EC_PORT80=y -CONFIG_PLATFORM_EC_PORT80_QUIET=y - -# AP Power Sequencing -CONFIG_AP_PWRSEQ=y -CONFIG_X86_NON_DSX_PWRSEQ_ADL=y -CONFIG_X86_NON_DSX_PWRSEQ_CONSOLE=y -CONFIG_X86_NON_DSX_PWRSEQ_HOST_CMD=y -CONFIG_AP_PWRSEQ_S0IX=y -CONFIG_AP_PWRSEQ_S0IX_ERROR_RECOVERY=y - -# Keyboard support -CONFIG_PLATFORM_EC_KBLIGHT_ENABLE_PIN=y -CONFIG_PLATFORM_EC_KEYBOARD_PROTOCOL_8042=y -CONFIG_PLATFORM_EC_VOLUME_BUTTONS=y -CONFIG_PLATFORM_EC_CMD_BUTTON=n -# Column 2 is driven through the GSC, which inverts the signal going through it -CONFIG_PLATFORM_EC_KEYBOARD_COL2_INVERTED=y - -# LED -CONFIG_PLATFORM_EC_LED_COMMON=y -CONFIG_PLATFORM_EC_LED_ONOFF_STATES=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_LEDTEST=n - -# MKBP event -CONFIG_PLATFORM_EC_MKBP_EVENT=y -CONFIG_PLATFORM_EC_MKBP_INPUT_DEVICES=y -CONFIG_PLATFORM_EC_MKBP_USE_GPIO_AND_HOST_EVENT=y - -# Temperature sensor support -CONFIG_PLATFORM_EC_TEMP_SENSOR_FIRST_READ_DELAY=y - -# CBI EEPROM support -CONFIG_EEPROM=y -CONFIG_PLATFORM_EC_BOARD_VERSION_CBI=y - -# PWM support -CONFIG_PWM_SHELL=y - -# Sensors support -CONFIG_PLATFORM_EC_LID_ANGLE=y -CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y -CONFIG_PLATFORM_EC_MOTIONSENSE=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y -CONFIG_PLATFORM_EC_ACCEL_FIFO=y -CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y - -# USB-C: enable PD on up to two ports -CONFIG_PLATFORM_EC_USBC=y -CONFIG_PLATFORM_EC_USBC_PPC=n -CONFIG_PLATFORM_EC_USB_VID=0x18d1 -CONFIG_PLATFORM_EC_USB_PID=0x505a -# USB4 and TBT are unsupported -CONFIG_PLATFORM_EC_USB_PD_USB4=n -CONFIG_PLATFORM_EC_USB_PD_TBT_COMPAT_MODE=n - -CONFIG_PLATFORM_EC_USB_MUX_RUNTIME_CONFIG=y -CONFIG_PLATFORM_EC_USB_MUX_VIRTUAL=y -CONFIG_PLATFORM_EC_USB_PD_REQUIRE_AP_MODE_ENTRY=y -# ADL integrated muxes are slow: unblock PD -CONFIG_PLATFORM_EC_USB_MUX_TASK=y - -# USB-C TCPC and PPC standard options -CONFIG_PLATFORM_EC_USB_PD_TCPC_LOW_POWER=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_MEASURE_CHARGER=y - -# USB-A host ports -CONFIG_PLATFORM_EC_USB_PORT_ENABLE_DYNAMIC=y -# Both ports use a smart switch with CTL1..3 fixed high, for SDP2 or CDP only: -# either SLGC55545 or PI5USB2546. -CONFIG_PLATFORM_EC_USB_PORT_POWER_SMART=y -CONFIG_PLATFORM_EC_USB_PORT_POWER_SMART_CDP_SDP_ONLY=y -CONFIG_PLATFORM_EC_USB_PORT_POWER_SMART_DEFAULT_CDP=y -CONFIG_PLATFORM_EC_USB_PORT_POWER_SMART_INVERTED=y - -# Battery support -CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y -CONFIG_PLATFORM_EC_BATTERY_PRESENT_GPIO=y -CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y -CONFIG_PLATFORM_EC_BATTERY_SMART=y -CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y - -# Charger support -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10 -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=10 -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC_CHARGER=y -CONFIG_PLATFORM_EC_OCPC_DEF_DRIVELIMIT_MILLIVOLTS=200 -# Assume 4% overdraw, which could be changed with actual characterization -CONFIG_PLATFORM_EC_CHARGER_INPUT_CURRENT_DERATE_PCT=4 -CONFIG_PLATFORM_EC_CHARGER_MIN_INPUT_CURRENT_LIMIT=512 - -# Reduce logging so that state transitions do not cause protocol issues -# pd dump [1-3] can be used to increase the debugging level -CONFIG_PLATFORM_EC_USB_PD_INITIAL_DEBUG_LEVEL=0 - -# System-side power distribution is designed to be robust up to about 45W, and -# higher input power may have negative reliability implications (especially for -# systems with 2S batteries). Most devices can't exceed 45W sinking anyway, so -# limit charger power to keep system input current within the design range. -CONFIG_PLATFORM_EC_PD_MAX_POWER_MW=45000 -# 15V input is slightly more efficient than 20V for all supported chargers, and -# because power is limited to 45W for other reasons (see above) limiting input -# voltage like this does not compromise the total power capacity of the system. -CONFIG_PLATFORM_EC_PD_MAX_VOLTAGE_MV=15000
\ No newline at end of file |