summaryrefslogtreecommitdiff
path: root/zephyr/program/nissa/pujjo/overlay.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'zephyr/program/nissa/pujjo/overlay.dtsi')
-rw-r--r--zephyr/program/nissa/pujjo/overlay.dtsi371
1 files changed, 0 insertions, 371 deletions
diff --git a/zephyr/program/nissa/pujjo/overlay.dtsi b/zephyr/program/nissa/pujjo/overlay.dtsi
deleted file mode 100644
index cb20ec6554..0000000000
--- a/zephyr/program/nissa/pujjo/overlay.dtsi
+++ /dev/null
@@ -1,371 +0,0 @@
-/* Copyright 2022 The ChromiumOS Authors
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include <cros/thermistor/thermistor.dtsi>
-#include <dt-bindings/usb_pd_tcpm.h>
-
-/ {
- aliases {
- gpio-cbi-wp = &gpio_ec_cbi_wp;
- gpio-wp = &gpio_ec_wp_odl;
- int-wp = &int_wp_l;
- gpio-kbd-kso2 = &gpio_ec_kso_02_inv;
- };
-
- ec-console {
- compatible = "ec-console";
- disabled = "events", "lpc", "hostcmd";
- };
-
- batteries {
- default_battery: smp {
- compatible = "smp,l22m3pg0", "battery-smart";
- };
- smp_l22m3pg1 {
- compatible = "smp,l22m3pg1", "battery-smart";
- };
- sunwoda_l22d3pg0 {
- compatible = "sunwoda,l22d3pg0", "battery-smart";
- };
- sunwoda_l22d3pg1 {
- compatible = "sunwoda,l22d3pg1", "battery-smart";
- };
- celxpert_l22c3pg0 {
- compatible = "celxpert,l22c3pg0", "battery-smart";
- };
- };
-
- hibernate-wake-pins {
- compatible = "cros-ec,hibernate-wake-pins";
- wakeup-irqs = <
- &int_power_button
- &int_lid_open
- >;
- };
-
- gpio-interrupts {
- compatible = "cros-ec,gpio-interrupts";
-
- int_power_button: power_button {
- irq-pin = <&gpio_gsc_ec_pwr_btn_odl>;
- flags = <GPIO_INT_EDGE_BOTH>;
- handler = "power_button_interrupt";
- };
- int_wp_l: wp_l {
- irq-pin = <&gpio_ec_wp_odl>;
- flags = <GPIO_INT_EDGE_BOTH>;
- handler = "switch_interrupt";
- };
- int_lid_open: lid_open {
- irq-pin = <&gpio_lid_open>;
- flags = <GPIO_INT_EDGE_BOTH>;
- handler = "lid_interrupt";
- };
- int_tablet_mode: tablet_mode {
- irq-pin = <&gpio_tablet_mode_l>;
- flags = <GPIO_INT_EDGE_BOTH>;
- handler = "gmr_tablet_switch_isr";
- };
- int_imu: ec_imu {
- irq-pin = <&gpio_imu_int_l>;
- flags = <GPIO_INT_EDGE_FALLING>;
- handler = "motion_interrupt";
- };
- int_lid_accel: lid_accel {
- irq-pin = <&gpio_acc_int_l>;
- flags = <GPIO_INT_EDGE_FALLING>;
- handler = "lid_accel_interrupt";
- };
- int_vol_down: vol_down {
- irq-pin = <&gpio_voldn_btn_odl>;
- flags = <GPIO_INT_EDGE_BOTH>;
- handler = "button_interrupt";
- };
- int_vol_up: vol_up {
- irq-pin = <&gpio_volup_btn_odl>;
- flags = <GPIO_INT_EDGE_BOTH>;
- handler = "button_interrupt";
- };
- int_usb_c0: usb_c0 {
- irq-pin = <&gpio_usb_c0_int_odl>;
- flags = <GPIO_INT_EDGE_FALLING>;
- handler = "usb_interrupt";
- };
- };
-
- named-gpios {
- gpio_sb_2: sb_2 {
- gpios = <&gpiod 4 GPIO_OUTPUT>;
- no-auto-init;
- };
-
- gpio_sb_3: sb_3 {
- gpios = <&gpiof 5 (GPIO_OPEN_DRAIN | GPIO_VOLTAGE_1P8)>;
- no-auto-init;
- };
- gpio_sb_4: sb_4 {
- gpios = <&gpiof 4 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
- no-auto-init;
- };
- gpio_fan_enable: fan-enable {
- gpios = <&gpio6 3 GPIO_OUTPUT>;
- no-auto-init;
- };
- ec-i2c-sensor-scl {
- gpios = <&gpio9 0 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
- };
- ec-i2c-sensor-sda {
- gpios = <&gpio8 7 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>;
- };
- gpio_power_led: power_led {
- gpios = <&gpioc 2 GPIO_OUTPUT_LOW>;
- };
- gpio_led_1_odl: led_1_odl {
- gpios = <&gpioc 4 GPIO_OUTPUT_LOW>;
- };
- gpio_led_2_odl: led_2_odl {
- gpios = <&gpioc 3 GPIO_OUTPUT_LOW>;
- };
- };
-
- /*
- * Aliases used for sub-board GPIOs.
- */
- aliases {
- /*
- * Sub-board with type A USB, enable.
- */
- gpio-en-usb-a1-vbus = &gpio_sb_2;
- /*
- * HPD pins for HDMI sub-board.
- */
- gpio-hdmi-en-odl = &gpio_sb_3;
- gpio-hpd-odl = &gpio_sb_4;
- /*
- * Enable S5 rails for LTE sub-board
- */
- gpio-en-sub-s5-rails = &gpio_sb_2;
- };
-
- temp_cpu: cpu {
- compatible = "cros-ec,temp-sensor-thermistor";
- thermistor = <&thermistor_3V3_51K1_47K_4050B>;
- adc = <&adc_temp_sensor_1>;
- };
- temp_ddr: ddr {
- compatible = "cros-ec,temp-sensor-thermistor";
- thermistor = <&thermistor_3V3_51K1_47K_4050B>;
- adc = <&adc_temp_sensor_2>;
- };
- temp_ambient: ambient {
- compatible = "cros-ec,temp-sensor-thermistor";
- thermistor = <&thermistor_3V3_51K1_47K_4050B>;
- adc = <&adc_temp_sensor_3>;
- };
-
- named-temp-sensors {
- compatible = "cros-ec,temp-sensors";
- cpu {
- temp_fan_off = <35>;
- temp_fan_max = <60>;
- temp_host_high = <90>;
- temp_host_halt = <100>;
- temp_host_release_high = <85>;
- power-good-pin = <&gpio_ec_soc_dsw_pwrok>;
- sensor = <&temp_cpu>;
- };
- ddr {
- temp_fan_off = <35>;
- temp_fan_max = <60>;
- temp_host_high = <90>;
- temp_host_halt = <100>;
- temp_host_release_high = <85>;
- power-good-pin = <&gpio_ec_soc_dsw_pwrok>;
- sensor = <&temp_ddr>;
- };
- ambient {
- temp_fan_off = <35>;
- temp_fan_max = <60>;
- temp_host_high = <90>;
- temp_host_halt = <100>;
- temp_host_release_high = <85>;
- power-good-pin = <&gpio_ec_soc_dsw_pwrok>;
- sensor = <&temp_ambient>;
- };
- };
-
- usba {
- compatible = "cros-ec,usba-port-enable-pins";
- /*
- * sb_2 is only configured as GPIO when USB-A1 is present,
- * but it's still safe to control when disabled.
- *
- * ILIM_SEL pins are referred to by legacy enum name,
- * GPIO_USB*_ILIM_SEL. The one for port A1 is unused on
- * sub-boards that don't have USB-A so is safe to control
- * regardless of system configuration.
- */
- enable-pins = <&gpio_en_usb_a0_vbus &gpio_sb_2>;
- status = "okay";
- };
-
- usbc {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port0@0 {
- compatible = "named-usbc-port";
- reg = <0>;
- bc12 = <&bc12_port0>;
- chg = <&chg_port0>;
- tcpc = <&tcpc_port0>;
- usb-mux-chain-0 {
- compatible = "cros-ec,usb-mux-chain";
- usb-muxes = <&virtual_mux_0>;
- };
- };
- port0-muxes {
- virtual_mux_0: virtual-mux-0 {
- compatible = "cros-ec,usbc-mux-virtual";
- };
- };
- };
-
- fans {
- compatible = "cros-ec,fans";
-
- fan_0 {
- pwms = <&pwm5 5 PWM_KHZ(1) PWM_POLARITY_NORMAL>;
- rpm_min = <2200>;
- rpm_start = <2200>;
- rpm_max = <4200>;
- tach = <&tach2>;
- enable_gpio = <&gpio_fan_enable>;
- };
- };
-
- /*
- * Declare unused GPIOs so that they are shut down
- * and use minimal power
- */
- unused-pins {
- compatible = "unused-gpios";
- unused-gpios =
- <&gpio3 3 0>,
- <&gpio3 6 0>,
- <&gpiod 7 0>,
- <&gpiof 2 0>,
- <&gpiof 3 0>;
- };
-};
-
-&thermistor_3V3_51K1_47K_4050B {
- status = "okay";
-};
-
-&adc_ec_vsense_pp3300_s5 {
- /*
- * Voltage divider on input has 47k upper and 220k lower legs with
- * 2714 mV full-scale reading on the ADC. Apply the largest possible
- * multiplier (without overflowing int32) to get the best possible
- * approximation of the actual ratio, but derate by a factor of two to
- * ensure unexpectedly high values won't overflow.
- */
- mul = <(791261 / 2)>;
- div = <(651975 / 2)>;
-};
-
-/* Set bus speeds for I2C */
-&i2c0_0 {
- label = "I2C_EEPROM";
- clock-frequency = <I2C_BITRATE_FAST>;
-
- cbi_eeprom: eeprom@50 {
- compatible = "atmel,at24";
- reg = <0x50>;
- size = <2048>;
- pagesize = <16>;
- address-width = <8>;
- timeout = <5>;
- };
-};
-
-&i2c1_0 {
- label = "I2C_SENSOR";
- clock-frequency = <I2C_BITRATE_FAST>;
-};
-
-&i2c3_0 {
- label = "I2C_USB_C0_TCPC";
- clock-frequency = <I2C_BITRATE_FAST_PLUS>;
-
- bc12_port0: pi3usb9201@5f {
- compatible = "pericom,pi3usb9201";
- status = "okay";
- reg = <0x5f>;
- /*
- * BC1.2 interrupt is shared with TCPC, so
- * IRQ is not specified here and handled by
- * usb_c0_interrupt.
- */
- };
-
- chg_port0: isl923x@9 {
- compatible = "intersil,isl923x";
- status = "okay";
- reg = <0x9>;
- };
-
- tcpc_port0: raa489000@22 {
- compatible = "renesas,raa489000";
- reg = <0x22>;
- tcpc-flags = <(
- TCPC_FLAGS_TCPCI_REV2_0 |
- TCPC_FLAGS_VBUS_MONITOR)>;
- };
-};
-
-&i2c7_0 {
- label = "I2C_BATTERY";
- clock-frequency = <I2C_BITRATE_STANDARD>;
-};
-
-&pwm5_gpb7 {
- drive-open-drain;
-};
-
-&pwm5 {
- status = "okay";
- clock-bus = "NPCX_CLOCK_BUS_LFCLK";
- pinctrl-0 = <&pwm5_gpb7>;
- pinctrl-names = "default";
-};
-
-/* Tachometer for fan speed measurement */
-&tach2 {
- status = "okay";
- pinctrl-0 = <&ta2_1_in_gp73>;
- pinctrl-names = "default";
- port = <NPCX_TACH_PORT_A>; /* port-A is selected */
- sample-clk = <NPCX_TACH_FREQ_LFCLK>; /* Use LFCLK as sampling clock */
- pulses-per-round = <2>; /* number of pulses per round of encoder */
-};
-
-/* host interface */
-&espi0 {
- status = "okay";
- pinctrl-0 = <&espi_lpc_gp46_47_51_52_53_54_55_57>;
- pinctrl-names = "default";
-};
-
-/*
- * Declare GPIOs that have leakage current caused by board issues here. NPCX ec
- * will disable their input buffers before entering deep sleep and restore them
- * after waking up automatically for better power consumption.
- */
-&power_leakage_io {
- leak-gpios = <&gpioa 4 0
- &gpiof 1 0>;
-};
View Lorry Controller Status