diff options
Diffstat (limited to 'zephyr/program/rex/prj.conf')
| -rw-r--r-- | zephyr/program/rex/prj.conf | 151 |
1 files changed, 0 insertions, 151 deletions
diff --git a/zephyr/program/rex/prj.conf b/zephyr/program/rex/prj.conf deleted file mode 100644 index 221f1e712b..0000000000 --- a/zephyr/program/rex/prj.conf +++ /dev/null @@ -1,151 +0,0 @@ -# Copyright 2022 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_PLATFORM_EC=y -CONFIG_CROS_EC=y -CONFIG_SHIMMED_TASKS=y -CONFIG_SYSCON=y -# Enable during development -CONFIG_LTO=n -CONFIG_PLATFORM_EC_SYSTEM_UNLOCKED=y -CONFIG_PLATFORM_EC_BOARD_RESET_AFTER_POWER_ON=y - -# Shell Commands -CONFIG_SHELL_HELP=y -CONFIG_SHELL_HISTORY=y -CONFIG_SHELL_TAB=y -CONFIG_SHELL_TAB_AUTOCOMPLETION=y -CONFIG_KERNEL_SHELL=y - -# Disable default features we don't want in a minimal example. -CONFIG_PLATFORM_EC_BACKLIGHT_LID=y -CONFIG_PLATFORM_EC_SWITCH=y -CONFIG_PLATFORM_EC_VBOOT_EFS2=y - -# Application processor; communicates with EC via eSPI -CONFIG_AP=y -CONFIG_ESPI=y -CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S3=y -CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S4=y -CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S5=y -CONFIG_PLATFORM_EC_HOSTCMD=y -# Disabling this until temp sensor support is in -CONFIG_PLATFORM_EC_THROTTLE_AP=n -CONFIG_PLATFORM_EC_PORT80=y - -# Power Sequecing -CONFIG_AP_X86_INTEL_MTL=y -CONFIG_X86_NON_DSX_PWRSEQ_MTL=y -CONFIG_X86_NON_DSX_PWRSEQ_HOST_CMD=y -# TODO (b/240434243): This may be needed, but using eSPI VW for now -CONFIG_PLATFORM_EC_POWERSEQ_SLP_S3_L_OVERRIDE=n -CONFIG_PLATFORM_EC_POWERSEQ_PP5000_CONTROL=n - -# Zephyr Inbuilt AP Power Sequencing Config -CONFIG_AP_PWRSEQ=y -CONFIG_X86_NON_DSX_PWRSEQ_CONSOLE=y -CONFIG_AP_PWRSEQ_S0IX=y - -# I2C -CONFIG_PLATFORM_EC_HOSTCMD_I2C_CONTROL=y - -# Temperature sensors -CONFIG_SENSOR=y -CONFIG_PLATFORM_EC_TEMP_SENSOR_POWER=y - -# CBI EEPROM support -CONFIG_EEPROM=y -CONFIG_PLATFORM_EC_BOARD_VERSION_CBI=y -CONFIG_PLATFORM_EC_BYPASS_CBI_EEPROM_WP_CHECK=y - -# LED -CONFIG_PLATFORM_EC_LED_DT=y - -# Battery -CONFIG_PLATFORM_EC_BATTERY_SMART=y -CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y -CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y -CONFIG_PLATFORM_EC_BATTERY_PRESENT_GPIO=y -CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y - -# Charger -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y -CONFIG_PLATFORM_EC_CHARGER_DEFAULT_CURRENT_LIMIT=512 -CONFIG_PLATFORM_EC_CHARGER_ISL9241=y -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=5 -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=10 -CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON=30000 -CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT=15000 -CONFIG_PLATFORM_EC_CHARGER_MIN_INPUT_CURRENT_LIMIT=512 - -# USBC -CONFIG_PLATFORM_EC_USBC_PPC=y -CONFIG_PLATFORM_EC_USBC_PPC_NX20P3483=y -CONFIG_PLATFORM_EC_USBC_PPC_SYV682X=y -CONFIG_PLATFORM_EC_USBC_PPC_SYV682C=y -CONFIG_PLATFORM_EC_USBC_PPC_SYV682X_SMART_DISCHARGE=y -CONFIG_PLATFORM_EC_USBC_RETIMER_INTEL_HB=y -CONFIG_PLATFORM_EC_USBC_VCONN=y - -CONFIG_PLATFORM_EC_USB_DRP_ACC_TRYSRC=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y -CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_PPC=y -CONFIG_PLATFORM_EC_USB_PD_FRS=y -CONFIG_PLATFORM_EC_USB_PD_FRS_PPC=y -CONFIG_PLATFORM_EC_USB_PD_REV30=y -CONFIG_PLATFORM_EC_USB_PD_TCPC_LOW_POWER=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_TCPCI=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_NCT38XX=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8815=y -CONFIG_PLATFORM_EC_USB_PD_TRY_SRC=y -CONFIG_PLATFORM_EC_USB_PD_DUAL_ROLE_AUTO_TOGGLE=y -CONFIG_PLATFORM_EC_USB_PD_TBT_COMPAT_MODE=y -CONFIG_PLATFORM_EC_USB_PD_USB32_DRD=y -CONFIG_PLATFORM_EC_USB_PD_USB4=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_MEASURE_CHARGER=y -CONFIG_PLATFORM_EC_USB_PID=0x504D - -#USB Mux -CONFIG_PLATFORM_EC_USB_MUX_VIRTUAL=y -CONFIG_PLATFORM_EC_USB_MUX_TASK=y - -# External power -CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y - -# Standard shimmed features -CONFIG_PLATFORM_EC_POWER_BUTTON=y -CONFIG_PLATFORM_EC_LID_SWITCH=y - -# Keyboard support -CONFIG_PLATFORM_EC_KEYBOARD_PROTOCOL_8042=y -# Column 2 is driven through the GSC, which inverts the signal going through it -CONFIG_PLATFORM_EC_KEYBOARD_COL2_INVERTED=y - -# MKBP event -CONFIG_PLATFORM_EC_MKBP_EVENT=y -CONFIG_PLATFORM_EC_MKBP_INPUT_DEVICES=y -CONFIG_PLATFORM_EC_MKBP_USE_GPIO_AND_HOST_EVENT=y - -# Sensors console command -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_I2C_SPEED=y - -# Sensors -CONFIG_SENSOR=y -CONFIG_SENSOR_SHELL=n -CONFIG_PLATFORM_EC_MOTIONSENSE=y -CONFIG_PLATFORM_EC_ACCEL_FIFO=y -CONFIG_PLATFORM_EC_DYNAMIC_MOTION_SENSOR_COUNT=y -CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y -CONFIG_PLATFORM_EC_LID_ANGLE=y -CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y -CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y -CONFIG_PLATFORM_EC_TABLET_MODE=y -CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=y - -# Sensor Drivers -CONFIG_PLATFORM_EC_ACCELGYRO_LSM6DSO=y -CONFIG_PLATFORM_EC_ACCEL_LIS2DW12=y -CONFIG_PLATFORM_EC_ALS_TCS3400=y |