diff options
Diffstat (limited to 'zephyr/program/skyrim/morthal/morthal.dtsi')
| -rw-r--r-- | zephyr/program/skyrim/morthal/morthal.dtsi | 185 |
1 files changed, 0 insertions, 185 deletions
diff --git a/zephyr/program/skyrim/morthal/morthal.dtsi b/zephyr/program/skyrim/morthal/morthal.dtsi deleted file mode 100644 index 99a062220d..0000000000 --- a/zephyr/program/skyrim/morthal/morthal.dtsi +++ /dev/null @@ -1,185 +0,0 @@ -/* Copyright 2022 The ChromiumOS Authors - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <dt-bindings/usbc_mux.h> - -#include "../i2c.dtsi" - -/ { - named-gpios { - /* Morthal-specific GPIO customizations */ - }; - - named-temp-sensors { - compatible = "cros-ec,temp-sensors"; - soc-pct2075 { - temp_host_high = <100>; - temp_host_halt = <105>; - temp_host_release_high = <80>; - temp_host_release_halt = <80>; - temp_fan_off = <0>; - temp_fan_max = <70>; - power-good-pin = <&gpio_pg_pwr_s5>; - sensor = <&soc_pct2075>; - }; - amb-pct2075 { - power-good-pin = <&gpio_pg_pwr_s5>; - sensor = <&amb_pct2075>; - }; - }; - - /* - * Note this is expected to vary per-board, so we keep it in the board - * dts files. - */ - morthal-fw-config { - compatible = "cros-ec,cbi-fw-config"; - - form-factor { - enum-name = "FW_FORM_FACTOR"; - start = <0>; - size = <1>; - - ff-clamshell { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_FF_CLAMSHELL"; - value = <0>; - }; - ff-convertible { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_FF_CONVERTIBLE"; - value = <1>; - default; - }; - }; - io-db { - enum-name = "FW_IO_DB"; - start = <6>; - size = <2>; - - io-db-ps8811-ps8818 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_IO_DB_PS8811_PS8818"; - value = <0>; - }; - io-db-none-anx7483 { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_IO_DB_NONE_ANX7483"; - value = <1>; - default; - }; - }; - - /* - * FW_CONFIG field to enable fan or not. - */ - fan { - enum-name = "FW_FAN"; - start = <10>; - size = <1>; - - no-fan { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_FAN_NOT_PRESENT"; - value = <0>; - }; - fan-present { - compatible = "cros-ec,cbi-fw-config-value"; - enum-name = "FW_FAN_PRESENT"; - value = <1>; - /* - * Set as default so that unprovisioned - * configs will run the fan regardless. - */ - default; - }; - }; - }; - - /* Rotation matrices for motion sensors. */ - motionsense-rotation-ref { - compatible = "cros-ec,motionsense-rotation-ref"; - lid_rot_ref: lid-rotation-ref { - mat33 = <0 (-1) 0 - 1 0 0 - 0 0 1>; - }; - - lid_rot_ref1: lid-rotation-ref1 { - mat33 = <0 1 0 - (-1) 0 0 - 0 0 1>; - }; - - base_rot_ref: base-rotation-ref { - mat33 = <0 1 0 - (-1) 0 0 - 0 0 1>; - }; - }; - - ppc_port0: aoz1380 { - compatible = "aoz,aoz1380"; - status = "okay"; - }; -}; - -&i2c0_0 { - anx7483_port0: anx7483@3e { - compatible = "analogix,anx7483"; - reg = <0x3e>; - board-set = "board_anx7483_c0_mux_set"; - flags = <USB_MUX_FLAG_RESETS_IN_G3>; - }; -}; - -&i2c1_0 { - anx7483_port1: anx7483@3e { - compatible = "analogix,anx7483"; - reg = <0x3e>; - board-set = "board_anx7483_c1_mux_set"; - flags = <USB_MUX_FLAG_RESETS_IN_G3>; - }; - ppc_port1: nx20p348x@71 { - compatible = "nxp,nx20p348x"; - status = "okay"; - reg = <0x71>; - }; - ps8818_port1: ps8818@28 { - compatible = "parade,ps8818"; - reg = <0x28>; - flags = <(USB_MUX_FLAG_RESETS_IN_G3)>; - board-set = "board_c1_ps8818_mux_set"; - }; -}; - -&i2c4_1 { - charger: isl9241@9 { - compatible = "intersil,isl9241"; - status = "okay"; - reg = <0x9>; - }; -}; - -&usbc_port0 { - ppc = <&ppc_port0>; - usb-mux-chain-0 { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&amd_fp6_port0 &anx7483_port0>; - }; -}; - -&usbc_port1 { - ppc = <&ppc_port1>; - usb-mux-chain-1-anx { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&amd_fp6_port1 &anx7483_port1>; - }; - usb_mux_chain_ps8818_port1: usb-mux-chain-1-ps { - compatible = "cros-ec,usb-mux-chain"; - usb-muxes = <&amd_fp6_port1 &ps8818_port1>; - alternative-chain; - }; -}; |