diff options
Diffstat (limited to 'zephyr/program/trogdor/lazor/prj.conf')
| -rw-r--r-- | zephyr/program/trogdor/lazor/prj.conf | 149 |
1 files changed, 0 insertions, 149 deletions
diff --git a/zephyr/program/trogdor/lazor/prj.conf b/zephyr/program/trogdor/lazor/prj.conf deleted file mode 100644 index 7863c75917..0000000000 --- a/zephyr/program/trogdor/lazor/prj.conf +++ /dev/null @@ -1,149 +0,0 @@ -# Copyright 2021 The ChromiumOS Authors -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_CROS_EC=y -# -# Lazor actually has a NPCX7M6FC, but -# the NPCX7M7FC is actually the same die, without the -# extra RAM being tested. The code size really could -# do with the extra space, so we pretend the EC is the -# part with the larger RAM. YMMV. -# -CONFIG_SOC_NPCX7M7FC=y -CONFIG_SOC_SERIES_NPCX7=y -CONFIG_SHIMMED_TASKS=y -CONFIG_PLATFORM_EC=y -CONFIG_PLATFORM_EC_BRINGUP=y -CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y -CONFIG_PLATFORM_EC_SWITCH=y -CONFIG_PLATFORM_EC_LID_SWITCH=y -CONFIG_PLATFORM_EC_BACKLIGHT_LID=y -CONFIG_PLATFORM_EC_POWER_BUTTON=y - -# LED -CONFIG_PLATFORM_EC_LED_DT=y - -# PWM -CONFIG_PWM=y - -# Application Processor is Qualcomm SC7180 -CONFIG_AP_ARM_QUALCOMM_SC7180=y - -# Board version is selected over GPIO board ID pins. -CONFIG_PLATFORM_EC_BOARD_VERSION_GPIO=y - -# LN9310 Switchcap -CONFIG_PLATFORM_EC_SWITCHCAP_LN9310=y - -# Power Sequencing -CONFIG_PLATFORM_EC_POWERSEQ=y -CONFIG_PLATFORM_EC_POWERSEQ_HOST_SLEEP=y -CONFIG_PLATFORM_EC_POWER_SLEEP_FAILURE_DETECTION=y -CONFIG_PLATFORM_EC_CHIPSET_RESET_HOOK=y -CONFIG_PLATFORM_EC_CHIPSET_RESUME_INIT_HOOK=y - -# Trogdor family does not use EFS2 -CONFIG_PLATFORM_EC_VBOOT_EFS2=n - -# MKBP event -CONFIG_PLATFORM_EC_MKBP_EVENT=y -CONFIG_PLATFORM_EC_MKBP_USE_GPIO=y - -# Keyboard -CONFIG_PLATFORM_EC_KEYBOARD_PROTOCOL_MKBP=y -CONFIG_PLATFORM_EC_MKBP_INPUT_DEVICES=y -CONFIG_PLATFORM_EC_KEYBOARD_COL2_INVERTED=y -CONFIG_PLATFORM_EC_VOLUME_BUTTONS=y -CONFIG_PLATFORM_EC_CMD_BUTTON=y - -# Battery -CONFIG_PLATFORM_EC_BATTERY_SMART=y -CONFIG_PLATFORM_EC_I2C_VIRTUAL_BATTERY=y -CONFIG_PLATFORM_EC_I2C_PASSTHRU_RESTRICTED=y -CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y -CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y -CONFIG_PLATFORM_EC_BATTERY_PRESENT_GPIO=y -CONFIG_PLATFORM_EC_CHARGER_ISL9238=y -CONFIG_PLATFORM_EC_CHARGE_RAMP_HW=y -CONFIG_PLATFORM_EC_USE_BATTERY_DEVICE_CHEMISTRY=y -CONFIG_PLATFORM_EC_BATTERY_DEVICE_CHEMISTRY="LION" -CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC_CHARGER=y -CONFIG_PLATFORM_EC_CHARGER_MIN_BAT_PCT_FOR_POWER_ON=2 -CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON=10000 -CONFIG_PLATFORM_EC_CHARGER_MIN_INPUT_CURRENT_LIMIT=512 -CONFIG_PLATFORM_EC_CHARGER_PROFILE_OVERRIDE=y -CONFIG_PLATFORM_EC_CHARGER_PSYS=y -CONFIG_PLATFORM_EC_CHARGER_PSYS_READ=y -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10 -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=20 -CONFIG_PLATFORM_EC_CONSOLE_CMD_CHARGER_ADC_AMON_BMON=y - -# USB-C -CONFIG_PLATFORM_EC_USB_PD_USB32_DRD=n -CONFIG_PLATFORM_EC_USBC_PPC_SN5S330=y -CONFIG_PLATFORM_EC_USBC_RETIMER_FW_UPDATE=n -CONFIG_PLATFORM_EC_USBC_SS_MUX_DFP_ONLY=y -CONFIG_PLATFORM_EC_USB_DRP_ACC_TRYSRC=y -CONFIG_PLATFORM_EC_USB_PD_5V_EN_CUSTOM=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y -CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_PPC=y -CONFIG_PLATFORM_EC_USB_PD_REV30=n -CONFIG_PLATFORM_EC_USB_PD_TBT_COMPAT_MODE=n -CONFIG_PLATFORM_EC_USB_PD_USB4=n -CONFIG_PLATFORM_EC_USB_PD_TCPC_LOW_POWER=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_MULTI_PS8XXX=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8751=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8805=y -CONFIG_PLATFORM_EC_USB_PD_TCPC_RUNTIME_CONFIG=n -CONFIG_PLATFORM_EC_USB_MUX_RUNTIME_CONFIG=n -CONFIG_PLATFORM_EC_USB_PD_LOGGING=y - -# USB ID -# This is allocated specifically for Trogdor -# http://google3/hardware/standards/usb/ -# TODO(b/183608112): Move to device tree -CONFIG_PLATFORM_EC_USB_PID=0x5043 - -# RTC -CONFIG_PLATFORM_EC_RTC=y -CONFIG_PLATFORM_EC_HOSTCMD_RTC=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_RTC=y - -# EC software sync -CONFIG_PLATFORM_EC_VBOOT_HASH=y - -# Sensors -CONFIG_PLATFORM_EC_MOTIONSENSE=y -CONFIG_PLATFORM_EC_ACCEL_FIFO=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y -CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y -CONFIG_PLATFORM_EC_LID_ANGLE=y -CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y -CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y -CONFIG_PLATFORM_EC_TABLET_MODE=y -CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=y - -# Sensor Drivers -CONFIG_PLATFORM_EC_ACCEL_BMA255=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI160=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y - -# Console history -CONFIG_SHELL_HISTORY=y -CONFIG_SHELL_CMDS=y -CONFIG_SHELL_HELP=n -CONFIG_SHELL_MINIMAL=y - -# Taskinfo -CONFIG_THREAD_MONITOR=y -CONFIG_KERNEL_SHELL=y - -CONFIG_SYSCON=y - -# Features should be enabled. But the code RAM is not enough, disable them. -#CONFIG_PLATFORM_EC_ACCEL_SPOOF_MODE=y -#CONFIG_PLATFORM_EC_EMULATED_SYSRQ=y |