diff options
Diffstat (limited to 'zephyr/projects/asurada/hayato')
-rw-r--r-- | zephyr/projects/asurada/hayato/CMakeLists.txt | 27 | ||||
-rw-r--r-- | zephyr/projects/asurada/hayato/battery.dts | 12 | ||||
-rw-r--r-- | zephyr/projects/asurada/hayato/gpio.dts | 347 | ||||
-rw-r--r-- | zephyr/projects/asurada/hayato/include/gpio_map.h | 75 | ||||
-rw-r--r-- | zephyr/projects/asurada/hayato/include/i2c_map.h | 13 | ||||
-rw-r--r-- | zephyr/projects/asurada/hayato/include/pwm_map.h | 23 | ||||
-rw-r--r-- | zephyr/projects/asurada/hayato/motionsense.dts | 157 | ||||
-rw-r--r-- | zephyr/projects/asurada/hayato/prj.conf | 120 | ||||
-rw-r--r-- | zephyr/projects/asurada/hayato/pwm.dts | 48 | ||||
-rw-r--r-- | zephyr/projects/asurada/hayato/src/i2c.c | 17 | ||||
-rw-r--r-- | zephyr/projects/asurada/hayato/zmake.yaml | 16 |
11 files changed, 0 insertions, 855 deletions
diff --git a/zephyr/projects/asurada/hayato/CMakeLists.txt b/zephyr/projects/asurada/hayato/CMakeLists.txt deleted file mode 100644 index 660b0a9088..0000000000 --- a/zephyr/projects/asurada/hayato/CMakeLists.txt +++ /dev/null @@ -1,27 +0,0 @@ -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -cmake_minimum_required(VERSION 3.13.1) -add_compile_definitions(BOARD_HAYATO) - -find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE}) -project(hayato) - -zephyr_library_include_directories(include) - -set(PLATFORM_EC_BASEBOARD "${PLATFORM_EC}/baseboard/asurada" CACHE PATH - "Path to the platform/ec baseboard directory") -set(PLATFORM_EC_BOARD "${PLATFORM_EC}/board/hayato" CACHE PATH - "Path to the platform/ec board directory") - -zephyr_library_sources( - "${PLATFORM_EC_BASEBOARD}/board_chipset.c" - "${PLATFORM_EC_BASEBOARD}/board_id.c" - "${PLATFORM_EC_BASEBOARD}/hibernate.c" - "${PLATFORM_EC_BASEBOARD}/regulator.c" - "${PLATFORM_EC_BASEBOARD}/usbc_config.c" - "${PLATFORM_EC_BASEBOARD}/usb_pd_policy.c") - -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_I2C - "src/i2c.c") diff --git a/zephyr/projects/asurada/hayato/battery.dts b/zephyr/projects/asurada/hayato/battery.dts deleted file mode 100644 index deb803bb8c..0000000000 --- a/zephyr/projects/asurada/hayato/battery.dts +++ /dev/null @@ -1,12 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - batteries { - default_battery: c235 { - compatible = "as3gwrc3ka,c235-41"; - }; - }; -}; diff --git a/zephyr/projects/asurada/hayato/gpio.dts b/zephyr/projects/asurada/hayato/gpio.dts deleted file mode 100644 index f04171651f..0000000000 --- a/zephyr/projects/asurada/hayato/gpio.dts +++ /dev/null @@ -1,347 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - named-gpios { - compatible = "named-gpios"; - - power_button_l: power_button_l { - gpios = <&gpioe 4 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_POWER_BUTTON_L"; - label = "POWER_BUTTON_L"; - }; - lid_open: lid_open { - gpios = <&gpioe 2 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - label = "LID_OPEN"; - }; - tablet_mode_l { - gpios = <&gpioj 7 GPIO_INPUT>; - enum-name = "GPIO_TABLET_MODE_L"; - label = "TABLET_MODE_L"; - }; - ap_ec_warm_rst_req { - gpios = <&gpiod 3 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_AP_EC_WARM_RST_REQ"; - label = "AP_EC_WARM_RST_REQ"; - }; - ap_ec_watchdog_l { - gpios = <&gpioc 7 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_AP_EC_WATCHDOG_L"; - label = "AP_EC_WATCHDOG_L"; - }; - ap_in_sleep_l { - gpios = <&gpiof 2 (GPIO_INPUT | GPIO_PULL_DOWN | - GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_AP_IN_SLEEP_L"; - label = "AP_IN_SLEEP_L"; - }; - ap-xhci-init-done { - gpios = <&gpiod 2 (GPIO_INPUT | GPIO_PULL_DOWN | - GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_AP_XHCI_INIT_DONE"; - label = "AP_XHCI_INIT_DONE"; - }; - pmic_ec_pwrgd { - gpios = <&gpiof 3 (GPIO_INPUT | GPIO_PULL_DOWN | - GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_PMIC_EC_PWRGD"; - label = "PMIC_EC_PWRGD"; - }; - gpio_accel_gyro_int_l: base_imu_int_l { - gpios = <&gpioj 2 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_EC_IMU_INT_L"; - label = "BASE_IMU_INT_L"; - }; - lid_accel_int_l { - gpios = <&gpioj 3 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_LID_ACCEL_INT_L"; - label = "LID_ACCEL_INT_L"; - }; - als_rgb_int_odl { - gpios = <&gpiof 0 GPIO_INPUT>; - enum-name = "GPIO_ALS_RGB_INT_ODL"; - label = "ALS_RGB_INT_ODL"; - }; - usb_c0_ppc_int_odl { - gpios = <&gpiod 1 GPIO_INPUT>; - enum-name = "GPIO_USB_C0_PPC_INT_ODL"; - label = "USB_C0_PPC_INT_ODL"; - }; - usb_c0_bc12_int_odl { - gpios = <&gpioj 6 GPIO_INPUT>; - enum-name = "GPIO_USB_C0_BC12_INT_ODL"; - label = "USB_C0_BC12_INT_ODL"; - }; - usb_c1_bc12_int_l { - gpios = <&gpioj 4 GPIO_INPUT>; - enum-name = "GPIO_USB_C1_BC12_INT_L"; - label = "USB_C1_BC12_INT_L"; - }; - volume_down_l { - gpios = <&gpiod 5 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_VOLUME_DOWN_L"; - label = "VOLUME_DOWN_L"; - }; - volume_up_l { - gpios = <&gpiod 6 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_VOLUME_UP_L"; - label = "VOLUME_UP_L"; - }; - ac_present: ac_present { - gpios = <&gpioe 5 GPIO_INPUT>; - enum-name = "GPIO_AC_PRESENT"; - label = "AC_PRESENT"; - }; - wp { - gpios = <&gpioi 4 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_WP"; - label = "WP"; - }; - spi0_cs { - gpios = <&gpiom 5 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_SPI0_CS"; - label = "SPI0_CS"; - }; - x_ec_gpio2 { - gpios = <&gpiob 2 GPIO_ODR_HIGH>; - enum-name = "GPIO_X_EC_GPIO2"; - label = "X_EC_GPIO2"; - }; - ec_pmic_en_odl { - gpios = <&gpiod 0 (GPIO_ODR_HIGH | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_EC_PMIC_EN_ODL"; - label = "EC_PMIC_EN_ODL"; - }; - ec_pmic_watchdog_l { - gpios = <&gpioh 0 (GPIO_ODR_LOW | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_EC_PMIC_WATCHDOG_L"; - label = "EC_PMIC_WATCHDOG_L"; - }; - en_pp5000_a { - gpios = <&gpioc 6 GPIO_OUT_HIGH>; - enum-name = "GPIO_EN_PP5000_A"; - label = "EN_PP5000_A"; - }; - pg_mt6315_proc_odl { - gpios = <&gpioe 1 GPIO_INPUT>; - enum-name = "GPIO_PG_MT6315_PROC_ODL"; - label = "PG_MT6315_PROC_ODL"; - }; - pg_mt6360_odl { - gpios = <&gpiof 1 GPIO_INPUT>; - enum-name = "GPIO_PG_MT6360_ODL"; - label = "PG_MT6360_ODL"; - }; - pg_pp5000_a_odl { - gpios = <&gpioa 6 GPIO_INPUT>; - enum-name = "GPIO_PG_PP5000_A_ODL"; - label = "PG_PP5000_A_ODL"; - }; - en_slp_z { - gpios = <&gpioe 3 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_SLP_Z"; - label = "EN_SLP_Z"; - }; - sys_rst_odl { - gpios = <&gpiob 6 GPIO_ODR_LOW>; - enum-name = "GPIO_SYS_RST_ODL"; - label = "SYS_RST_ODL"; - }; - ec_bl_en_od { - gpios = <&gpiob 5 (GPIO_ODR_LOW | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_EC_BL_EN_OD"; - label = "EC_BL_EN_OD"; - }; - ec_int_l { - gpios = <&gpioe 6 (GPIO_ODR_HIGH | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_EC_INT_L"; - label = "EC_INT_L"; - }; - dp_aux_path_sel { - gpios = <&gpiog 0 GPIO_OUT_HIGH>; - enum-name = "GPIO_DP_AUX_PATH_SEL"; - label = "DP_AUX_PATH_SEL"; - }; - ec_dpbrdg_hpd_odl { - gpios = <&gpioj 0 (GPIO_ODR_HIGH | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_EC_DPBRDG_HPD_ODL"; - label = "EC_DPBRDG_HPD_ODL"; - }; - en_pp5000_usb_a0_vbus { - gpios = <&gpiob 7 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_PP5000_USB_A0_VBUS"; - label = "EN_PP5000_USB_A0_VBUS"; - }; - usb_c0_frs_en { - gpios = <&gpioh 3 GPIO_OUT_LOW>; - enum-name = "GPIO_USB_C0_FRS_EN"; - label = "USB_C0_FRS_EN"; - }; - ec_batt_pres_odl { - gpios = <&gpioc 0 GPIO_INPUT>; - enum-name = "GPIO_BATT_PRES_ODL"; - label = "EC_BATT_PRES_ODL"; - }; - bc12_det_en { - gpios = <&gpioj 5 GPIO_OUT_LOW>; - enum-name = "GPIO_BC12_DET_EN"; - label = "BC12_DET_EN"; - }; - en_ec_id_odl { - gpios = <&gpioh 5 GPIO_ODR_LOW>; - enum-name = "GPIO_EN_EC_ID_ODL"; - label = "EN_EC_ID_ODL"; - }; - entering_rw { - gpios = <&gpioc 5 GPIO_OUT_LOW>; - enum-name = "GPIO_ENTERING_RW"; - label = "ENTERING_RW"; - }; - en_5v_usm { - gpios = <&gpiod 7 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_5V_USM"; - label = "EN_5V_USM"; - }; - i2c_b_scl { - gpios = <&gpiob 3 GPIO_INPUT>; - enum-name = "GPIO_I2C_B_SCL"; - label = "I2C_B_SCL"; - }; - i2c_b_sda { - gpios = <&gpiob 4 GPIO_INPUT>; - enum-name = "GPIO_I2C_B_SDA"; - label = "I2C_B_SDA"; - }; - i2c_c_scl { - gpios = <&gpioc 1 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_I2C_C_SCL"; - label = "I2C_C_SCL"; - }; - i2c_c_sda { - gpios = <&gpioc 2 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_I2C_C_SDA"; - label = "I2C_C_SDA"; - }; - i2c_e_scl { - gpios = <&gpioe 0 GPIO_INPUT>; - enum-name = "GPIO_I2C_E_SCL"; - label = "I2C_E_SCL"; - }; - i2c_e_sda { - gpios = <&gpioe 7 GPIO_INPUT>; - enum-name = "GPIO_I2C_E_SDA"; - label = "I2C_E_SDA"; - }; - i2c_f_scl { - gpios = <&gpiof 6 GPIO_INPUT>; - enum-name = "GPIO_I2C_F_SCL"; - label = "I2C_F_SCL"; - }; - i2c_f_sda { - gpios = <&gpiof 7 GPIO_INPUT>; - enum-name = "GPIO_I2C_F_SDA"; - label = "I2C_F_SDA"; - }; - ec_x_gpio1 { - gpios = <&gpioh 4 GPIO_OUT_LOW>; - enum-name = "GPIO_EC_X_GPIO1"; - label = "EC_X_GPIO1"; - }; - ec_x_gpio3 { - gpios = <&gpioj 1 GPIO_INPUT>; - enum-name = "GPIO_EC_X_GPIO3"; - label = "EC_X_GPIO3"; - }; - set_vmc_volt_at_1v8 { - gpios = <&gpiod 4 (GPIO_INPUT | GPIO_PULL_DOWN | - GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_SET_VMC_VOLT_AT_1V8"; - label = "SET_VMC_VOLT_AT_1V8"; - }; - en_pp3000_vmc_pmu { - gpios = <&gpiod 2 (GPIO_INPUT | GPIO_PULL_DOWN | - GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_EN_PP3000_VMC_PMU"; - label = "EN_PP3000_VMC_PMU"; - }; - packet_mode_en { - gpios = <&gpioa 3 (GPIO_INPUT | GPIO_PULL_DOWN)>; - enum-name = "GPIO_PACKET_MODE_EN"; - label = "PACKET_MODE_EN"; - }; - usb_a0_fault_odl { - gpios = <&gpioa 7 GPIO_INPUT>; - enum-name = "GPIO_USB_A0_FAULT_ODL"; - label = "USB_A0_FAULT_ODL"; - }; - charger_prochot_odl { - gpios = <&gpioc 3 GPIO_INPUT>; - enum-name = "GPIO_CHARGER_PROCHOT_ODL"; - label = "CHARGER_PROCHOT_ODL"; - }; - pg_mt6315_gpu_odl { - gpios = <&gpioh 6 GPIO_INPUT>; - enum-name = "GPIO_PG_MT6315_GPU_ODL"; - label = "PG_MT6315_GPU_ODL"; - }; - en_pp3000_sd_u { - gpios = <&gpiog 1 (GPIO_INPUT | GPIO_PULL_DOWN | - GPIO_VOLTAGE_1P8)>; - enum-name = "GPIO_EN_PP3000_SD_U"; - label = "EN_PP3000_SD_U"; - }; - ccd_mode_odl { - gpios = <&gpioc 4 GPIO_INPUT>; - enum-name = "GPIO_CCD_MODE_ODL"; - label = "CCD_MODE_ODL"; - }; - spi_clk_gpg6 { - gpios = <&gpiog 6 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_SPI_CLK_GPG6"; - label = "SPI_CLK_GPG6"; - }; - spi_mosi_gpg4 { - gpios = <&gpiog 4 GPIO_OUT_LOW>; - enum-name = "GPIO_SPI_MOSI_GPG4"; - label = "SPI_MOSI_GPG4"; - }; - spi_miso_gpg5 { - gpios = <&gpiog 5 GPIO_OUT_LOW>; - enum-name = "GPIO_SPI_MISO_GPG5"; - label = "SPI_MISO_GPG5"; - }; - spi_cs_gpg7 { - gpios = <&gpiog 7 GPIO_OUT_LOW>; - enum-name = "GPIO_SPI_CS_GPG7"; - label = "SPI_CS_GPG7"; - }; - }; - - hibernate-wake-pins { - compatible = "cros-ec,hibernate-wake-pins"; - wakeup-pins = <&ac_present - &power_button_l - &lid_open>; - }; - - unused-pins { - compatible = "unused-gpios"; - - unused-gpios = - /* uart1_rx */ - <&gpiob 0 GPIO_INPUT>, - /* nc_gpg3 */ - <&gpiog 3 GPIO_OUT_LOW>, - /* nc_gpi7 */ - <&gpioi 7 GPIO_OUT_LOW>, - /* nc_gpm2 */ - <&gpiom 2 (GPIO_INPUT | GPIO_PULL_DOWN)>, - /* nc_gpm3 */ - <&gpiom 3 (GPIO_INPUT | GPIO_PULL_DOWN)>, - /* nc_gpm6 */ - <&gpiom 6 (GPIO_INPUT | GPIO_PULL_DOWN)>; - }; -}; diff --git a/zephyr/projects/asurada/hayato/include/gpio_map.h b/zephyr/projects/asurada/hayato/include/gpio_map.h deleted file mode 100644 index 5f01f290d2..0000000000 --- a/zephyr/projects/asurada/hayato/include/gpio_map.h +++ /dev/null @@ -1,75 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef __ZEPHYR_GPIO_MAP_H -#define __ZEPHYR_GPIO_MAP_H - -#include <devicetree.h> -#include <gpio_signal.h> - -/* - * TODO(b:188674805) create a driver to pull this information from DeviceTree - */ -#include "power/mt8192.h" - -#define GPIO_ENTERING_RW GPIO_UNIMPLEMENTED -#define GPIO_WP_L GPIO_UNIMPLEMENTED - -#ifdef CONFIG_PLATFORM_EC_GMR_TABLET_MODE -#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L -#endif - -/* - * Set EC_CROS_GPIO_INTERRUPTS to a space-separated list of GPIO_INT items. - * - * Each GPIO_INT requires three parameters: - * gpio_signal - The enum gpio_signal for the interrupt gpio - * interrupt_flags - The interrupt-related flags (e.g. GPIO_INT_EDGE_BOTH) - * handler - The platform/ec interrupt handler. - * - * Ensure that this files includes all necessary headers to declare all - * referenced handler functions. - * - * For example, one could use the follow definition: - * #define EC_CROS_GPIO_INTERRUPTS \ - * GPIO_INT(NAMED_GPIO(h1_ec_pwr_btn_odl), GPIO_INT_EDGE_BOTH, button_print) - */ -#define EC_CROS_GPIO_INTERRUPTS \ - GPIO_INT(GPIO_LID_OPEN, \ - GPIO_INT_EDGE_BOTH, lid_interrupt) \ - GPIO_INT(GPIO_POWER_BUTTON_L, \ - GPIO_INT_EDGE_BOTH, power_button_interrupt) \ - GPIO_INT(GPIO_EC_IMU_INT_L, \ - GPIO_INT_EDGE_FALLING, bmi160_interrupt) \ - GPIO_INT(GPIO_LID_ACCEL_INT_L, \ - GPIO_INT_EDGE_FALLING, lis2dw12_interrupt) \ - GPIO_INT(GPIO_TABLET_MODE_L, \ - GPIO_INT_EDGE_BOTH, gmr_tablet_switch_isr) \ - GPIO_INT(GPIO_USB_C0_PPC_INT_ODL, \ - GPIO_INT_EDGE_BOTH, ppc_interrupt) \ - GPIO_INT(GPIO_USB_C0_BC12_INT_ODL, \ - GPIO_INT_EDGE_FALLING, bc12_interrupt) \ - GPIO_INT(GPIO_USB_C1_BC12_INT_L, \ - GPIO_INT_EDGE_FALLING, bc12_interrupt) \ - GPIO_INT(GPIO_AC_PRESENT, \ - GPIO_INT_EDGE_BOTH, extpower_interrupt) \ - GPIO_INT(GPIO_X_EC_GPIO2, \ - GPIO_INT_EDGE_FALLING, x_ec_interrupt) \ - GPIO_INT(GPIO_AP_XHCI_INIT_DONE, \ - GPIO_INT_EDGE_BOTH, usb_a0_interrupt) \ - GPIO_INT(GPIO_AP_EC_WATCHDOG_L, \ - GPIO_INT_EDGE_BOTH, chipset_watchdog_interrupt) \ - GPIO_INT(GPIO_AP_IN_SLEEP_L, \ - GPIO_INT_EDGE_BOTH, power_signal_interrupt) \ - GPIO_INT(GPIO_PMIC_EC_PWRGD, \ - GPIO_INT_EDGE_BOTH, power_signal_interrupt) \ - GPIO_INT(GPIO_AP_EC_WARM_RST_REQ, \ - GPIO_INT_EDGE_RISING, chipset_reset_request_interrupt) \ - GPIO_INT(GPIO_SPI0_CS, \ - GPIO_INT_EDGE_FALLING, spi_event) - -#define GPIO_EN_PP5000 GPIO_EN_PP5000_A - -#endif /* __ZEPHYR_GPIO_MAP_H */ diff --git a/zephyr/projects/asurada/hayato/include/i2c_map.h b/zephyr/projects/asurada/hayato/include/i2c_map.h deleted file mode 100644 index 898d5c398c..0000000000 --- a/zephyr/projects/asurada/hayato/include/i2c_map.h +++ /dev/null @@ -1,13 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef __ZEPHYR_I2C_MAP_H -#define __ZEPHYR_I2C_MAP_H - -#include <devicetree.h> - -#include "i2c/i2c.h" - -#endif /* __ZEPHYR_I2C_MAP_H */ diff --git a/zephyr/projects/asurada/hayato/include/pwm_map.h b/zephyr/projects/asurada/hayato/include/pwm_map.h deleted file mode 100644 index 0f74812827..0000000000 --- a/zephyr/projects/asurada/hayato/include/pwm_map.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef __ZEPHYR_CHROME_PWM_MAP_H -#define __ZEPHYR_CHROME_PWM_MAP_H - -#include <devicetree.h> - -#include "config.h" - -#include "pwm/pwm.h" - -/* - * TODO(b/177452529): eliminate the dependency on enum pwm_channel - * and configure this information directly from the device tree. - */ -#define PWM_CH_LED1 NAMED_PWM(led1) -#define PWM_CH_LED2 NAMED_PWM(led2) -#define PWM_CH_LED3 NAMED_PWM(led3) - -#endif /* __ZEPHYR_CHROME_PWM_MAP_H */ diff --git a/zephyr/projects/asurada/hayato/motionsense.dts b/zephyr/projects/asurada/hayato/motionsense.dts deleted file mode 100644 index 10128b0838..0000000000 --- a/zephyr/projects/asurada/hayato/motionsense.dts +++ /dev/null @@ -1,157 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <dt-bindings/motionsense/utils.h> - - -/ { - aliases { - /* - * motion sense's <>_INT_EVENT is handled - * by alias. Using the alias, each driver creates - * its own <>_INT_EVENT. - */ - bmi160-int = &base_accel; - lis2dw12-int = &lid_accel; - }; - - /* - * Declare mutexes used by sensor drivers. - * A mutex node is used to create an instance of mutex_t. - * A mutex node is referenced by a sensor node if the - * corresponding sensor driver needs to use the - * instance of the mutex. - */ - motionsense-mutex { - compatible = "cros-ec,motionsense-mutex"; - lid_mutex: lid-mutex { - label = "LID_MUTEX"; - }; - - mutex_bmi160: bmi160-mutex { - label = "BMI160_MUTEX"; - }; - }; - - /* Rotation matrix used by drivers. */ - motionsense-rotation-ref { - compatible = "cros-ec,motionsense-rotation-ref"; - lid_rot_ref: lid-rotation-ref { - mat33 = <(-1) 0 0 - 0 (-1) 0 - 0 0 1>; - }; - - base_rot_ref: base-rotation-ref { - mat33 = <1 0 0 - 0 (-1) 0 - 0 0 (-1)>; - }; - }; - - /* - * Driver specific data. A driver-specific data can be shared with - * different motion sensors while they are using the same driver. - * - * If a node's compatible starts with "cros-ec,accelgyro-", it is for - * a common structure defined in accelgyro.h. - * e.g) compatible = "cros-ec,accelgyro-als-drv-data" is for - * "struct als_drv_data_t" in accelgyro.h - */ - motionsense-sensor-data { - bmi160_data: bmi160-drv-data { - compatible = "cros-ec,drvdata-bmi160"; - status = "okay"; - }; - - lis2dw12_data: lis2dw12-drv-data { - compatible = "cros-ec,drvdata-lis2dw12"; - status = "okay"; - }; - }; - - /* - * List of motion sensors that creates motion_sensors array. - * The label "lid_accel" and "base_accel" are used to indicate - * motion sensor IDs for lid angle calculation. - */ - motionsense-sensor { - lid_accel: lid-accel { - compatible = "cros-ec,lis2dw12"; - status = "okay"; - - label = "Lid Accel"; - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_LID"; - mutex = <&lid_mutex>; - port = <&i2c_sensor>; - rot-standard-ref = <&lid_rot_ref>; - default-range = <2>; - drv-data = <&lis2dw12_data>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - label = "SENSOR_CONFIG_EC_S0"; - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - label = "SENSOR_CONFIG_EC_S3"; - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_accel: base-accel { - compatible = "cros-ec,bmi160-accel"; - status = "okay"; - - label = "Base Accel"; - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&mutex_bmi160>; - port = <&i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - drv-data = <&bmi160_data>; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - label = "SENSOR_CONFIG_EC_S0"; - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - label = "SENSOR_CONFIG_EC_S3"; - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base-gyro { - compatible = "cros-ec,bmi160-gyro"; - status = "okay"; - - label = "Base Gyro"; - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&mutex_bmi160>; - port = <&i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - drv-data = <&bmi160_data>; - }; - }; - - motionsense-sensor-info { - compatible = "cros-ec,motionsense-sensor-info"; - - /* - * list of GPIO interrupts that have to - * be enabled at initial stage - */ - sensor-irqs = <&gpio_accel_gyro_int_l>; - /* list of sensors in force mode */ - accel-force-mode-sensors = <&lid_accel>; - }; -}; diff --git a/zephyr/projects/asurada/hayato/prj.conf b/zephyr/projects/asurada/hayato/prj.conf deleted file mode 100644 index 2faab291f2..0000000000 --- a/zephyr/projects/asurada/hayato/prj.conf +++ /dev/null @@ -1,120 +0,0 @@ -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_CROS_EC=y -CONFIG_PLATFORM_EC=y -CONFIG_SHIMMED_TASKS=y - -# Bring up options -CONFIG_KERNEL_SHELL=y -CONFIG_PLATFORM_EC_SYSTEM_UNLOCKED=y -CONFIG_PLATFORM_EC_CONSOLE_USES_PRINTK=y - -# Battery -CONFIG_HAS_TASK_USB_CHG_P1=y -CONFIG_PLATFORM_EC_BATTERY=y -CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y -CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y -CONFIG_PLATFORM_EC_BATTERY_PRESENT_GPIO=y -CONFIG_PLATFORM_EC_BATTERY_SMART=y -CONFIG_PLATFORM_EC_BATT_FULL_CHIPSET_OFF_INPUT_LIMIT_MV=9000 -CONFIG_PLATFORM_EC_I2C_PASSTHRU_RESTRICTED=y -CONFIG_PLATFORM_EC_I2C_VIRTUAL_BATTERY=y - -# Charger -CONFIG_PLATFORM_EC_CHARGE_MANAGER=y -CONFIG_PLATFORM_EC_CHARGE_RAMP_HW=y -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC_CHARGER=y -CONFIG_PLATFORM_EC_CHARGER_ISL9238C=y -CONFIG_PLATFORM_EC_CHARGER_MAINTAIN_VBAT=y -CONFIG_PLATFORM_EC_CHARGER_OTG=y -CONFIG_PLATFORM_EC_CHARGER_PSYS=y -CONFIG_PLATFORM_EC_CHARGER_PSYS_READ=y -# BOARD_RS2 -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10 -# BOARD_RS1 -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=20 - -# Host Commands -CONFIG_PLATFORM_EC_HOSTCMD=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_CHARGER_ADC_AMON_BMON=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_SYSINFO=y -CONFIG_PLATFORM_EC_HOSTCMD_REGULATOR=y -CONFIG_PLATFORM_EC_HOST_COMMAND_STATUS=y - -# MKBP event mask -CONFIG_PLATFORM_EC_MKBP_EVENT_WAKEUP_MASK=y -CONFIG_PLATFORM_EC_MKBP_HOST_EVENT_WAKEUP_MASK=y - -# Sensors -CONFIG_PLATFORM_EC_MOTIONSENSE=y -CONFIG_PLATFORM_EC_ACCEL_FIFO=y -CONFIG_PLATFORM_EC_ACCEL_INTERRUPTS=y -CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y -CONFIG_PLATFORM_EC_LID_ANGLE=y -CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y -CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y -CONFIG_PLATFORM_EC_SWITCH=y -CONFIG_PLATFORM_EC_TABLET_MODE=y -CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=y - -# Sensor Drivers -CONFIG_PLATFORM_EC_ACCEL_LIS2DW12=y -CONFIG_PLATFORM_EC_ACCEL_LIS2DW12_AS_BASE=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI160=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y - -# USB-A -CONFIG_PLATFORM_EC_USB_A_PORT_COUNT=1 - -# USB-C -CONFIG_HAS_TASK_PD_C1=y -CONFIG_HAS_TASK_PD_INT_C1=n -CONFIG_HAS_TASK_PD_INT_C0=n -CONFIG_PLATFORM_EC_BC12_DETECT_PI3USB9201=y -CONFIG_PLATFORM_EC_BC12_DETECT_MT6360=y -CONFIG_PLATFORM_EC_BC12_SINGLE_DRIVER=n -CONFIG_PLATFORM_EC_MT6360_BC12_GPIO=y -CONFIG_PLATFORM_EC_SMBUS_PEC=y -CONFIG_PLATFORM_EC_USBC_PPC_DEDICATED_INT=y -CONFIG_PLATFORM_EC_USBC_PPC_SYV682C=y -CONFIG_PLATFORM_EC_USBC_PPC_SYV682X=y -CONFIG_PLATFORM_EC_USB_MUX_IT5205=y -CONFIG_PLATFORM_EC_USB_MUX_PS8743=y -CONFIG_PLATFORM_EC_USB_MUX_VIRTUAL=y -CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_PPC=y -CONFIG_PLATFORM_EC_USB_PD_DP_HPD_GPIO=y -CONFIG_PLATFORM_EC_USB_PD_DP_HPD_GPIO_CUSTOM=y -CONFIG_PLATFORM_EC_USB_PD_FRS=y -CONFIG_PLATFORM_EC_USB_PD_FRS_PPC=y -CONFIG_PLATFORM_EC_USB_PD_ITE_ACTIVE_PORT_COUNT=2 -CONFIG_PLATFORM_EC_USB_PD_LOGGING=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_DRIVER_IT8XXX2=y -CONFIG_PLATFORM_EC_USB_PD_TCPC_RUNTIME_CONFIG=n -CONFIG_PLATFORM_EC_USB_PD_TCPM_ITE_ON_CHIP=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_TCPCI=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_PPC=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_MEASURE_ADC_EACH_PORT=y -CONFIG_PLATFORM_EC_USB_PORT_POWER_DUMB_CUSTOM_HOOK=y -CONFIG_PLATFORM_EC_USB_PD_DUAL_ROLE_AUTO_TOGGLE=n -CONFIG_PLATFORM_EC_USB_PD_USB32_DRD=n -CONFIG_PLATFORM_EC_USB_PD_USB4=n -CONFIG_PLATFORM_EC_USB_PD_TBT_COMPAT_MODE=n - -# USB ID -# This is allocated for Asurada -# http://google3/hardware/standards/usb/ -# TODO(b/183608112): Move to device tree -CONFIG_PLATFORM_EC_USB_PID=0x5053 - -# VBoot without EFS2 -CONFIG_PLATFORM_EC_VBOOT_EFS2=n -CONFIG_PLATFORM_EC_VBOOT_HASH=y - -# TODO(b/180980668): bring these features up -CONFIG_LTO=n -CONFIG_PLATFORM_EC_BACKLIGHT_LID=n diff --git a/zephyr/projects/asurada/hayato/pwm.dts b/zephyr/projects/asurada/hayato/pwm.dts deleted file mode 100644 index fc8e0b169b..0000000000 --- a/zephyr/projects/asurada/hayato/pwm.dts +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - named-pwms { - compatible = "named-pwms"; - /* NOTE: &pwm number needs same with channel number */ - led1 { - pwms = <&pwm0 PWM_CHANNEL_0 PWM_POLARITY_INVERTED>; - label = "LED1"; - /* - * If we need pwm output in ITE chip power saving - * mode, then we should set frequency <=324Hz. - */ - frequency = <324>; - }; - led2 { - pwms = <&pwm1 PWM_CHANNEL_1 PWM_POLARITY_INVERTED>; - label = "LED2"; - frequency = <324>; - }; - led3 { - pwms = <&pwm2 PWM_CHANNEL_2 PWM_POLARITY_INVERTED>; - label = "LED3"; - frequency = <324>; - }; - }; -}; - -/* LED1 */ -&pwm0 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C4>; -}; - -/* LED2 */ -&pwm1 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C4>; -}; - -/* LED3 */ -&pwm2 { - status = "okay"; - prescaler-cx = <PWM_PRESCALER_C4>; -}; diff --git a/zephyr/projects/asurada/hayato/src/i2c.c b/zephyr/projects/asurada/hayato/src/i2c.c deleted file mode 100644 index 2c7a9c7130..0000000000 --- a/zephyr/projects/asurada/hayato/src/i2c.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include "i2c/i2c.h" -#include "i2c.h" - -/* Hayato board specific i2c implementation */ - -#ifdef CONFIG_PLATFORM_EC_I2C_PASSTHRU_RESTRICTED -int board_allow_i2c_passthru(int port) -{ - return (i2c_get_device_for_port(port) == - i2c_get_device_for_port(I2C_PORT_VIRTUAL_BATTERY)); -} -#endif diff --git a/zephyr/projects/asurada/hayato/zmake.yaml b/zephyr/projects/asurada/hayato/zmake.yaml deleted file mode 100644 index f4e821d582..0000000000 --- a/zephyr/projects/asurada/hayato/zmake.yaml +++ /dev/null @@ -1,16 +0,0 @@ -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -board: asurada -dts-overlays: - - battery.dts - - gpio.dts - - motionsense.dts - - pwm.dts -supported-toolchains: - - coreboot-sdk - - zephyr -supported-zephyr-versions: - - v2.6 -output-type: binman |