1 files changed, 33 insertions, 3 deletions

diff --git a/zephyr/projects/guybrush/prj.conf b/zephyr/projects/guybrush/prj.conf
index ce31304d3f..2714607afc 100644
--- a/zephyr/projects/guybrush/prj.conf
+++ b/zephyr/projects/guybrush/prj.conf
@@ -31,6 +31,8 @@ CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y
 CONFIG_PLATFORM_EC_BACKLIGHT_LID=n
 
 # Lid switch
+CONFIG_PLATFORM_EC_LID_ANGLE=y
+CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y
 CONFIG_PLATFORM_EC_LID_SWITCH=y
 
 # Keyboard
@@ -47,10 +49,38 @@ CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y
 CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=n
 CONFIG_PLATFORM_EC_BATTERY_PRESENT_GPIO=y
 
-CONFIG_PLATFORM_EC_CHARGER=n
-CONFIG_PLATFORM_EC_USBC=n
+# Charger
+CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y
+CONFIG_PLATFORM_EC_CHARGER_INPUT_CURRENT=512
+CONFIG_PLATFORM_EC_CHARGER_ISL9241=y
+CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10
+CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=20
+CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON=50000
+# TODO: Add charge ramp SW
+
+# USB-C
+CONFIG_PLATFORM_EC_BC12_DETECT_PI3USB9201=y
+CONFIG_PLATFORM_EC_USBC_PPC_NX20P3483=y
+CONFIG_PLATFORM_EC_USBC_PPC_AOZ1380=y
+CONFIG_PLATFORM_EC_USBC_RETIMER_ANX7451=y
+CONFIG_PLATFORM_EC_USBC_RETIMER_PS8811=y
+CONFIG_PLATFORM_EC_USBC_RETIMER_PS8818=y
+CONFIG_PLATFORM_EC_USBC_SS_MUX_DFP_ONLY=y
+CONFIG_PLATFORM_EC_USB_MUX_AMD_FP6=y
+CONFIG_PLATFORM_EC_USB_MUX_RUNTIME_CONFIG=y
+CONFIG_PLATFORM_EC_USB_DRP_ACC_TRYSRC=y
+CONFIG_PLATFORM_EC_USB_PID=0x504D
+CONFIG_PLATFORM_EC_USB_PD_5V_EN_CUSTOM=y
+CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y
+CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_TCPC=y
+CONFIG_PLATFORM_EC_USB_PD_LOGGING=y
+CONFIG_PLATFORM_EC_USB_PD_PORT_MAX_COUNT=2
+CONFIG_PLATFORM_EC_USB_PD_REV30=y
+CONFIG_PLATFORM_EC_USB_PD_TCPC_LOW_POWER=y
+CONFIG_PLATFORM_EC_USB_PD_TCPM_NCT38XX=y
+CONFIG_PLATFORM_EC_USB_PD_TCPC_RUNTIME_CONFIG=n
+CONFIG_PLATFORM_EC_USB_PD_VBUS_MEASURE_CHARGER=y
 
 # This is not yet supported
-CONFIG_PLATFORM_EC_ADC=n
 CONFIG_PLATFORM_EC_BOARD_VERSION_CBI=n
 CONFIG_PLATFORM_EC_BOARD_VERSION_GPIO=n