summaryrefslogtreecommitdiff
path: root/zephyr/projects/herobrine/herobrine_npcx9/gpio.dts
diff options
context:
space:
mode:
Diffstat (limited to 'zephyr/projects/herobrine/herobrine_npcx9/gpio.dts')
-rw-r--r--zephyr/projects/herobrine/herobrine_npcx9/gpio.dts103
1 files changed, 29 insertions, 74 deletions
diff --git a/zephyr/projects/herobrine/herobrine_npcx9/gpio.dts b/zephyr/projects/herobrine/herobrine_npcx9/gpio.dts
index 152f033db4..f1c3bc5fea 100644
--- a/zephyr/projects/herobrine/herobrine_npcx9/gpio.dts
+++ b/zephyr/projects/herobrine/herobrine_npcx9/gpio.dts
@@ -10,282 +10,238 @@
usb_c0_pd_int_odl {
gpios = <&gpioe 0 GPIO_INPUT>;
enum-name = "GPIO_USB_C0_PD_INT_ODL";
- label = "USB_C0_PD_INT_ODL";
};
usb_c1_pd_int_odl {
gpios = <&gpiof 5 GPIO_INPUT>;
enum-name = "GPIO_USB_C1_PD_INT_ODL";
- label = "USB_C1_PD_INT_ODL";
};
usb_c0_swctl_int_odl {
gpios = <&gpio0 3 GPIO_INPUT>;
enum-name = "GPIO_USB_C0_SWCTL_INT_ODL";
- label = "USB_C0_SWCTL_INT_ODL";
};
usb_c1_swctl_int_odl {
gpios = <&gpio4 0 GPIO_INPUT>;
enum-name = "GPIO_USB_C1_SWCTL_INT_ODL";
- label = "USB_C1_SWCTL_INT_ODL";
};
gpio_usb_c0_bc12_int_l: usb_c0_bc12_int_l {
- gpios = <&gpio6 1 (GPIO_INPUT | GPIO_PULL_UP)>;
+ gpios = <&gpio6 1 GPIO_INPUT_PULL_UP>;
enum-name = "GPIO_USB_C0_BC12_INT_L";
- label = "USB_C0_BC12_INT_L";
};
gpio_usb_c1_bc12_int_l: usb_c1_bc12_int_l {
- gpios = <&gpio8 2 (GPIO_INPUT | GPIO_PULL_UP)>;
+ gpios = <&gpio8 2 GPIO_INPUT_PULL_UP>;
enum-name = "GPIO_USB_C1_BC12_INT_L";
- label = "USB_C1_BC12_INT_L";
};
usb_a0_oc_odl {
- gpios = <&gpiof 4 (GPIO_INPUT | GPIO_PULL_UP)>;
+ gpios = <&gpiof 4 GPIO_INPUT_PULL_UP>;
enum-name = "GPIO_USB_A0_OC_ODL";
- label = "USB_A0_OC_ODL";
};
gpio_chg_acok_od: chg_acok_od {
gpios = <&gpiod 2 GPIO_INPUT>;
enum-name = "GPIO_AC_PRESENT";
- label = "CHG_ACOK_OD";
};
gpio_ec_pwr_btn_odl: ec_pwr_btn_odl {
gpios = <&gpio0 0 GPIO_INPUT>;
enum-name = "GPIO_POWER_BUTTON_L";
- label = "EC_PWR_BTN_ODL";
};
ec_voldn_btn_odl {
- gpios = <&gpio6 2 (GPIO_INPUT | GPIO_PULL_UP)>;
+ gpios = <&gpio6 2 GPIO_INPUT_PULL_UP>;
enum-name = "GPIO_VOLUME_DOWN_L";
- label = "EC_VOLDN_BTN_ODL";
};
ec_volup_btn_odl {
- gpios = <&gpioc 2 (GPIO_INPUT | GPIO_PULL_UP)>;
+ gpios = <&gpioc 2 GPIO_INPUT_PULL_UP>;
enum-name = "GPIO_VOLUME_UP_L";
- label = "EC_VOLUP_BTN_ODL";
};
ec_wp_odl {
gpios = <&gpiod 3 GPIO_INPUT>;
enum-name = "GPIO_WP_L";
- label = "EC_WP_ODL";
};
gpio_lid_open_ec: lid_open_ec {
gpios = <&gpio0 1 GPIO_INPUT>;
enum-name = "GPIO_LID_OPEN";
- label = "LID_OPEN_EC";
};
ap_rst_l {
gpios = <&gpio5 1 GPIO_INPUT>;
enum-name = "GPIO_AP_RST_L";
- label = "AP_RST_L";
};
ps_hold {
- gpios = <&gpioa 6 (GPIO_INPUT | GPIO_PULL_DOWN)>;
+ gpios = <&gpioa 6 GPIO_INPUT_PULL_DOWN>;
enum-name = "GPIO_PS_HOLD";
- label = "PS_HOLD";
};
ap_suspend {
gpios = <&gpio5 7 GPIO_INPUT>;
enum-name = "GPIO_AP_SUSPEND";
- label = "AP_SUSPEND";
};
- power_good {
- gpios = <&gpio3 7 (GPIO_INPUT | GPIO_PULL_DOWN)>;
+ mb_power_good {
+ gpios = <&gpio3 7 GPIO_INPUT_PULL_DOWN>;
enum-name = "GPIO_POWER_GOOD";
- label = "MB_POWER_GOOD";
};
warm_reset_l {
gpios = <&gpiob 0 GPIO_INPUT>;
enum-name = "GPIO_WARM_RESET_L";
- label = "WARM_RESET_L";
};
ap_ec_spi_cs_l {
- gpios = <&gpio5 3 (GPIO_INPUT | GPIO_PULL_DOWN)>;
- label = "AP_EC_SPI_CS_L";
+ gpios = <&gpio5 3 GPIO_INPUT_PULL_DOWN>;
};
tablet_mode_l {
gpios = <&gpioc 6 GPIO_INPUT>;
enum-name = "GPIO_TABLET_MODE_L";
- label = "TABLET_MODE_L";
};
gpio_accel_gyro_int_l: accel_gyro_int_l {
gpios = <&gpioa 3 GPIO_INPUT>;
enum-name = "GPIO_ACCEL_GYRO_INT_L";
- label = "ACCEL_GYRO_INT_L";
};
gpio_rtc_ec_wake_odl: rtc_ec_wake_odl {
#gpio-cells = <0>;
gpios = <&gpio0 2 GPIO_INPUT>;
enum-name = "GPIO_EC_RST_ODL";
- label = "EC_RST_ODL";
};
ec_entering_rw {
gpios = <&gpio7 2 GPIO_OUT_LOW>;
enum-name = "GPIO_ENTERING_RW";
- label = "EC_ENTERING_RW";
};
ccd_mode_odl {
gpios = <&gpio6 3 GPIO_INPUT>;
enum-name = "GPIO_CCD_MODE_ODL";
- label = "CCD_MODE_ODL";
};
ec_batt_pres_odl {
gpios = <&gpioe 5 GPIO_INPUT>;
enum-name = "GPIO_BATT_PRES_ODL";
- label = "EC_BATT_PRES_ODL";
};
ec_gsc_packet_mode {
gpios = <&gpio8 3 GPIO_OUT_LOW>;
enum-name = "GPIO_PACKET_MODE_EN";
- label = "EC_GSC_PACKET_MODE";
};
pmic_resin_l {
gpios = <&gpioa 0 GPIO_ODR_HIGH>;
enum-name = "GPIO_PMIC_RESIN_L";
- label = "PMIC_RESIN_L";
};
pmic_kpd_pwr_odl {
gpios = <&gpioa 2 GPIO_ODR_HIGH>;
enum-name = "GPIO_PMIC_KPD_PWR_ODL";
- label = "PMIC_KPD_PWR_ODL";
};
ap_ec_int_l {
gpios = <&gpio5 6 GPIO_ODR_HIGH>;
enum-name = "GPIO_EC_INT_L";
- label = "AP_EC_INT_L";
};
gpio_switchcap_on: switchcap_on {
gpios = <&gpiod 5 GPIO_OUT_LOW>;
enum-name = "GPIO_SWITCHCAP_ON";
- label = "SWITCHCAP_ON";
};
en_pp5000_s5 {
gpios = <&gpio7 3 GPIO_OUT_HIGH>;
enum-name = "GPIO_EN_PP5000";
- label = "EN_PP5000_S5";
};
ec_bl_disable_l {
- gpios = <&gpiob 6 GPIO_OUT_LOW>;
+ /* The PMIC controls backlight enable and this pin must
+ * be HiZ for normal operation. But the backlight can
+ * be enabled by setting this pin low and configuring it
+ * as an output.
+ */
+ gpios = <&gpiob 6 GPIO_INPUT>;
enum-name = "GPIO_ENABLE_BACKLIGHT";
- label = "EC_BL_DISABLE_L";
};
lid_accel_int_l {
gpios = <&gpioa 1 GPIO_INPUT>;
enum-name = "GPIO_LID_ACCEL_INT_L";
- label = "LID_ACCEL_INT_L";
};
tp_int_gate {
gpios = <&gpio7 4 GPIO_OUT_LOW>;
enum-name = "GPIO_TRACKPAD_INT_GATE";
- label = "TP_INT_GATE";
};
usb_c0_pd_rst_l {
gpios = <&gpiof 1 GPIO_OUT_HIGH>;
enum-name = "GPIO_USB_C0_PD_RST_L";
- label = "USB_C0_PD_RST_L";
};
usb_c1_pd_rst_l {
gpios = <&gpioe 4 GPIO_OUT_HIGH>;
enum-name = "GPIO_USB_C1_PD_RST_L";
- label = "USB_C1_PD_RST_L";
};
dp_mux_oe_l {
gpios = <&gpiob 1 GPIO_ODR_HIGH>;
enum-name = "GPIO_DP_MUX_OE_L";
- label = "DP_MUX_OE_L";
};
dp_mux_sel {
gpios = <&gpio4 5 GPIO_OUT_LOW>;
enum-name = "GPIO_DP_MUX_SEL";
- label = "DP_MUX_SEL";
};
dp_hot_plug_det_r {
gpios = <&gpio9 5 GPIO_OUT_LOW>;
enum-name = "GPIO_DP_HOT_PLUG_DET";
- label = "DP_HOT_PLUG_DET_R";
};
en_usb_a_5v {
gpios = <&gpiof 0 GPIO_OUT_LOW>;
enum-name = "GPIO_EN_USB_A_5V";
- label = "EN_USB_A_5V";
};
usb_a_cdp_ilim_en_l {
gpios = <&gpio7 5 GPIO_OUT_HIGH>;
- label = "USB_A_CDP_ILIM_EN_L";
+ };
+ usb_c0_frs_en {
+ gpios = <&gpioc 5 GPIO_OUT_LOW>;
+ enum-name = "GPIO_USB_C0_FRS_EN";
+ };
+ usb_c1_frs_en {
+ gpios = <&gpioc 1 GPIO_OUT_LOW>;
+ enum-name = "GPIO_USB_C1_FRS_EN";
};
ec_chg_led_y_c0 {
gpios = <&gpio6 0 GPIO_OUT_LOW>;
enum-name = "GPIO_EC_CHG_LED_Y_C0";
- label = "EC_CHG_LED_Y_C0";
};
ec_chg_led_w_c0 {
gpios = <&gpioc 0 GPIO_OUT_LOW>;
enum-name = "GPIO_EC_CHG_LED_W_C0";
- label = "EC_CHG_LED_W_C0";
};
ec_chg_led_y_c1 {
gpios = <&gpioc 3 GPIO_OUT_LOW>;
enum-name = "GPIO_EC_CHG_LED_Y_C1";
- label = "EC_CHG_LED_Y_C1";
};
ec_chg_led_w_c1 {
gpios = <&gpioc 4 GPIO_OUT_LOW>;
enum-name = "GPIO_EC_CHG_LED_W_C1";
- label = "EC_CHG_LED_W_C1";
};
ap_ec_spi_mosi {
- gpios = <&gpio4 6 (GPIO_INPUT | GPIO_PULL_DOWN)>;
- label = "AP_EC_SPI_MOSI";
+ gpios = <&gpio4 6 GPIO_INPUT_PULL_DOWN>;
};
ap_ec_spi_miso {
- gpios = <&gpio4 7 (GPIO_INPUT | GPIO_PULL_DOWN)>;
- label = "AP_EC_SPI_MISO";
+ gpios = <&gpio4 7 GPIO_INPUT_PULL_DOWN>;
};
ap_ec_spi_clk {
- gpios = <&gpio5 5 (GPIO_INPUT | GPIO_PULL_DOWN)>;
- label = "AP_EC_SPI_CLK";
+ gpios = <&gpio5 5 GPIO_INPUT_PULL_DOWN>;
};
gpio_brd_id0: brd_id0 {
gpios = <&gpio9 4 GPIO_INPUT>;
enum-name = "GPIO_BOARD_VERSION1";
- label = "BRD_ID0";
};
gpio_brd_id1: brd_id1 {
gpios = <&gpio9 7 GPIO_INPUT>;
enum-name = "GPIO_BOARD_VERSION2";
- label = "BRD_ID1";
};
gpio_brd_id2: brd_id2 {
gpios = <&gpioa 5 GPIO_INPUT>;
enum-name = "GPIO_BOARD_VERSION3";
- label = "BRD_ID2";
};
gpio_sku_id0: sku_id0 {
gpios = <&gpio6 7 GPIO_INPUT>;
enum-name = "GPIO_SKU_ID0";
- label = "SKU_ID0";
};
gpio_sku_id1: sku_id1 {
gpios = <&gpio7 0 GPIO_INPUT>;
enum-name = "GPIO_SKU_ID1";
- label = "SKU_ID1";
};
gpio_sku_id2: sku_id2 {
gpios = <&gpioe 1 GPIO_INPUT>;
enum-name = "GPIO_SKU_ID2";
- label = "SKU_ID2";
};
gpio_switchcap_pg: src_vph_pwr_pg {
- gpios = <&gpioe 2 (GPIO_INPUT | GPIO_PULL_DOWN)>;
+ gpios = <&gpioe 2 GPIO_INPUT_PULL_DOWN>;
enum-name = "GPIO_SWITCHCAP_PG";
- label = "SRC_VPH_PWR_PG";
};
arm_x86 {
gpios = <&gpio6 6 GPIO_OUT_LOW>;
- label = "ARM_X86";
};
ec_kso_02_inv {
gpios = <&gpio1 7 GPIO_OUT_LOW>;
enum-name = "GPIO_KBD_KSO2";
- label = "EC_KSO_02_INV";
};
};
@@ -342,11 +298,9 @@
<&gpio5 2 0>,
<&gpio5 4 0>,
<&gpio7 6 0>,
- <&gpioc 5 0>,
<&gpiod 1 0>,
<&gpiod 0 0>,
<&gpioe 3 0>,
- <&gpioc 1 0>,
<&gpio0 4 0>,
<&gpiod 6 0>,
<&gpio3 2 0>,
@@ -362,7 +316,8 @@
<&gpio9 3 0>,
<&gpioa 7 0>,
<&gpio5 0 0>,
- <&gpio8 1 0>;
+ <&gpio8 1 0>,
+ <&gpiob 7 0>;
};
};
View Lorry Controller Status