diff options
Diffstat (limited to 'zephyr/projects/herobrine/herobrine_npcx9/gpio.dts')
| -rw-r--r-- | zephyr/projects/herobrine/herobrine_npcx9/gpio.dts | 388 |
1 files changed, 0 insertions, 388 deletions
diff --git a/zephyr/projects/herobrine/herobrine_npcx9/gpio.dts b/zephyr/projects/herobrine/herobrine_npcx9/gpio.dts deleted file mode 100644 index 1f5052af04..0000000000 --- a/zephyr/projects/herobrine/herobrine_npcx9/gpio.dts +++ /dev/null @@ -1,388 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - named-gpios { - compatible = "named-gpios"; - - usb_c0_pd_int_odl { - gpios = <&gpioe 0 GPIO_INPUT>; - enum-name = "GPIO_USB_C0_PD_INT_ODL"; - label = "USB_C0_PD_INT_ODL"; - }; - usb_c1_pd_int_odl { - gpios = <&gpiof 5 GPIO_INPUT>; - enum-name = "GPIO_USB_C1_PD_INT_ODL"; - label = "USB_C1_PD_INT_ODL"; - }; - usb_c0_swctl_int_odl { - gpios = <&gpio0 3 GPIO_INPUT>; - enum-name = "GPIO_USB_C0_SWCTL_INT_ODL"; - label = "USB_C0_SWCTL_INT_ODL"; - }; - usb_c1_swctl_int_odl { - gpios = <&gpio4 0 GPIO_INPUT>; - enum-name = "GPIO_USB_C1_SWCTL_INT_ODL"; - label = "USB_C1_SWCTL_INT_ODL"; - }; - usb_c0_bc12_int_l { - gpios = <&gpio6 1 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_USB_C0_BC12_INT_L"; - label = "USB_C0_BC12_INT_L"; - }; - usb_c1_bc12_int_l { - gpios = <&gpio8 2 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_USB_C1_BC12_INT_L"; - label = "USB_C1_BC12_INT_L"; - }; - usb_a0_oc_odl { - gpios = <&gpiof 4 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_USB_A0_OC_ODL"; - label = "USB_A0_OC_ODL"; - }; - gpio_chg_acok_od: chg_acok_od { - gpios = <&gpiod 2 GPIO_INPUT>; - enum-name = "GPIO_AC_PRESENT"; - label = "CHG_ACOK_OD"; - }; - gpio_ec_pwr_btn_odl: ec_pwr_btn_odl { - gpios = <&gpio0 0 GPIO_INPUT>; - enum-name = "GPIO_POWER_BUTTON_L"; - label = "EC_PWR_BTN_ODL"; - }; - ec_voldn_btn_odl { - gpios = <&gpio6 2 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_VOLUME_DOWN_L"; - label = "EC_VOLDN_BTN_ODL"; - }; - ec_volup_btn_odl { - gpios = <&gpioc 2 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_VOLUME_UP_L"; - label = "EC_VOLUP_BTN_ODL"; - }; - ec_wp_odl { - gpios = <&gpiod 3 GPIO_INPUT>; - enum-name = "GPIO_WP_L"; - label = "EC_WP_ODL"; - }; - gpio_lid_open_ec: lid_open_ec { - gpios = <&gpio0 1 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - label = "LID_OPEN_EC"; - }; - ap_rst_l { - gpios = <&gpio5 1 GPIO_INPUT>; - enum-name = "GPIO_AP_RST_L"; - label = "AP_RST_L"; - }; - ps_hold { - gpios = <&gpioa 6 (GPIO_INPUT | GPIO_PULL_DOWN)>; - enum-name = "GPIO_PS_HOLD"; - label = "PS_HOLD"; - }; - ap_suspend { - gpios = <&gpio5 7 GPIO_INPUT>; - enum-name = "GPIO_AP_SUSPEND"; - label = "AP_SUSPEND"; - }; - power_good { - gpios = <&gpio3 7 (GPIO_INPUT | GPIO_PULL_DOWN)>; - enum-name = "GPIO_POWER_GOOD"; - label = "MB_POWER_GOOD"; - }; - warm_reset_l { - gpios = <&gpiob 0 GPIO_INPUT>; - enum-name = "GPIO_WARM_RESET_L"; - label = "WARM_RESET_L"; - }; - ap_ec_spi_cs_l { - gpios = <&gpio5 3 (GPIO_INPUT | GPIO_PULL_DOWN)>; - label = "AP_EC_SPI_CS_L"; - }; - tablet_mode_l { - gpios = <&gpioc 6 GPIO_INPUT>; - enum-name = "GPIO_TABLET_MODE_L"; - label = "TABLET_MODE_L"; - }; - gpio_accel_gyro_int_l: accel_gyro_int_l { - gpios = <&gpioa 3 GPIO_INPUT>; - enum-name = "GPIO_ACCEL_GYRO_INT_L"; - label = "ACCEL_GYRO_INT_L"; - }; - gpio_rtc_ec_wake_odl: rtc_ec_wake_odl { - #gpio-cells = <0>; - gpios = <&gpio0 2 GPIO_INPUT>; - enum-name = "GPIO_EC_RST_ODL"; - label = "EC_RST_ODL"; - }; - ec_entering_rw { - gpios = <&gpio7 2 GPIO_OUT_LOW>; - enum-name = "GPIO_ENTERING_RW"; - label = "EC_ENTERING_RW"; - }; - ccd_mode_odl { - gpios = <&gpio6 3 GPIO_INPUT>; - enum-name = "GPIO_CCD_MODE_ODL"; - label = "CCD_MODE_ODL"; - }; - ec_batt_pres_odl { - gpios = <&gpioe 5 GPIO_INPUT>; - enum-name = "GPIO_BATT_PRES_ODL"; - label = "EC_BATT_PRES_ODL"; - }; - ec_gsc_packet_mode { - gpios = <&gpio8 3 GPIO_OUT_LOW>; - enum-name = "GPIO_PACKET_MODE_EN"; - label = "EC_GSC_PACKET_MODE"; - }; - pmic_resin_l { - gpios = <&gpioa 0 GPIO_ODR_HIGH>; - enum-name = "GPIO_PMIC_RESIN_L"; - label = "PMIC_RESIN_L"; - }; - pmic_kpd_pwr_odl { - gpios = <&gpioa 2 GPIO_ODR_HIGH>; - enum-name = "GPIO_PMIC_KPD_PWR_ODL"; - label = "PMIC_KPD_PWR_ODL"; - }; - ap_ec_int_l { - gpios = <&gpio5 6 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_INT_L"; - label = "AP_EC_INT_L"; - }; - gpio_switchcap_on: switchcap_on { - gpios = <&gpiod 5 GPIO_OUT_LOW>; - enum-name = "GPIO_SWITCHCAP_ON"; - label = "SWITCHCAP_ON"; - }; - en_pp5000_s5 { - gpios = <&gpio7 3 GPIO_OUT_HIGH>; - enum-name = "GPIO_EN_PP5000"; - label = "EN_PP5000_S5"; - }; - ec_bl_disable_l { - gpios = <&gpiob 6 GPIO_OUT_LOW>; - enum-name = "GPIO_ENABLE_BACKLIGHT"; - label = "EC_BL_DISABLE_L"; - }; - lid_accel_int_l { - gpios = <&gpioa 1 GPIO_INPUT>; - enum-name = "GPIO_LID_ACCEL_INT_L"; - label = "LID_ACCEL_INT_L"; - }; - tp_int_gate { - gpios = <&gpio7 4 GPIO_OUT_LOW>; - enum-name = "GPIO_TRACKPAD_INT_GATE"; - label = "TP_INT_GATE"; - }; - usb_c0_pd_rst_l { - gpios = <&gpiof 1 GPIO_OUT_HIGH>; - enum-name = "GPIO_USB_C0_PD_RST_L"; - label = "USB_C0_PD_RST_L"; - }; - usb_c1_pd_rst_l { - gpios = <&gpioe 4 GPIO_OUT_HIGH>; - enum-name = "GPIO_USB_C1_PD_RST_L"; - label = "USB_C1_PD_RST_L"; - }; - dp_mux_oe_l { - gpios = <&gpiob 1 GPIO_ODR_HIGH>; - enum-name = "GPIO_DP_MUX_OE_L"; - label = "DP_MUX_OE_L"; - }; - dp_mux_sel { - gpios = <&gpio4 5 GPIO_OUT_LOW>; - enum-name = "GPIO_DP_MUX_SEL"; - label = "DP_MUX_SEL"; - }; - dp_hot_plug_det_r { - gpios = <&gpio9 5 GPIO_OUT_LOW>; - enum-name = "GPIO_DP_HOT_PLUG_DET"; - label = "DP_HOT_PLUG_DET_R"; - }; - en_usb_a_5v { - gpios = <&gpiof 0 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_USB_A_5V"; - label = "EN_USB_A_5V"; - }; - usb_a_cdp_ilim_en_l { - gpios = <&gpio7 5 GPIO_OUT_HIGH>; - label = "USB_A_CDP_ILIM_EN_L"; - }; - ec_chg_led_y_c0 { - gpios = <&gpio6 0 GPIO_OUT_LOW>; - enum-name = "GPIO_EC_CHG_LED_Y_C0"; - label = "EC_CHG_LED_Y_C0"; - }; - ec_chg_led_w_c0 { - gpios = <&gpioc 0 GPIO_OUT_LOW>; - enum-name = "GPIO_EC_CHG_LED_W_C0"; - label = "EC_CHG_LED_W_C0"; - }; - ec_chg_led_y_c1 { - gpios = <&gpioc 3 GPIO_OUT_LOW>; - enum-name = "GPIO_EC_CHG_LED_Y_C1"; - label = "EC_CHG_LED_Y_C1"; - }; - ec_chg_led_w_c1 { - gpios = <&gpioc 4 GPIO_OUT_LOW>; - enum-name = "GPIO_EC_CHG_LED_W_C1"; - label = "EC_CHG_LED_W_C1"; - }; - ap_ec_spi_mosi { - gpios = <&gpio4 6 (GPIO_INPUT | GPIO_PULL_DOWN)>; - label = "AP_EC_SPI_MOSI"; - }; - ap_ec_spi_miso { - gpios = <&gpio4 7 (GPIO_INPUT | GPIO_PULL_DOWN)>; - label = "AP_EC_SPI_MISO"; - }; - ap_ec_spi_clk { - gpios = <&gpio5 5 (GPIO_INPUT | GPIO_PULL_DOWN)>; - label = "AP_EC_SPI_CLK"; - }; - gpio_brd_id0: brd_id0 { - gpios = <&gpio9 4 GPIO_INPUT>; - enum-name = "GPIO_BOARD_VERSION1"; - label = "BRD_ID0"; - }; - gpio_brd_id1: brd_id1 { - gpios = <&gpio9 7 GPIO_INPUT>; - enum-name = "GPIO_BOARD_VERSION2"; - label = "BRD_ID1"; - }; - gpio_brd_id2: brd_id2 { - gpios = <&gpioa 5 GPIO_INPUT>; - enum-name = "GPIO_BOARD_VERSION3"; - label = "BRD_ID2"; - }; - gpio_sku_id0: sku_id0 { - gpios = <&gpio6 7 GPIO_INPUT>; - enum-name = "GPIO_SKU_ID0"; - label = "SKU_ID0"; - }; - gpio_sku_id1: sku_id1 { - gpios = <&gpio7 0 GPIO_INPUT>; - enum-name = "GPIO_SKU_ID1"; - label = "SKU_ID1"; - }; - gpio_sku_id2: sku_id2 { - gpios = <&gpioe 1 GPIO_INPUT>; - enum-name = "GPIO_SKU_ID2"; - label = "SKU_ID2"; - }; - gpio_switchcap_pg: src_vph_pwr_pg { - gpios = <&gpioe 2 (GPIO_INPUT | GPIO_PULL_DOWN)>; - enum-name = "GPIO_SWITCHCAP_PG"; - label = "SRC_VPH_PWR_PG"; - }; - arm_x86 { - gpios = <&gpio6 6 GPIO_OUT_LOW>; - label = "ARM_X86"; - }; - ec_kso_02_inv { - gpios = <&gpio1 7 GPIO_OUT_LOW>; - enum-name = "GPIO_KBD_KSO2"; - label = "EC_KSO_02_INV"; - }; - }; - - def-lvol-io-list { - compatible = "nuvoton,npcx-lvolctrl-def"; - lvol-io-pads = < - &lvol_iob3 /* EC_I2C_SENSOR_SCL */ - &lvol_iob2 /* EC_I2C_SENSOR_SDA */ - >; - }; - - hibernate-wake-pins { - compatible = "cros-ec,hibernate-wake-pins"; - wakeup-pins = < - &gpio_chg_acok_od - &gpio_ec_pwr_btn_odl - &gpio_lid_open_ec - &gpio_rtc_ec_wake_odl - >; - }; - - vsby-psl-in-list { - /* Use PSL_IN1/2/3/4 as detection pins from hibernate mode */ - psl-in-pads = <&psl_in1 &psl_in2 &psl_in3 &psl_in4>; - }; - - sku { - compatible = "cros-ec,gpio-id"; - - bits = < - &gpio_sku_id0 - &gpio_sku_id1 - &gpio_sku_id2 - >; - - system = "binary_first_base3"; - }; - - board { - compatible = "cros-ec,gpio-id"; - - bits = < - &gpio_brd_id0 - &gpio_brd_id1 - &gpio_brd_id2 - >; - - system = "binary_first_base3"; - }; - - unused-pins { - compatible = "unused-gpios"; - unused-gpios = - <&gpio5 2 0>, - <&gpio5 4 0>, - <&gpio7 6 0>, - <&gpioc 5 0>, - <&gpiod 1 0>, - <&gpiod 0 0>, - <&gpioe 3 0>, - <&gpioc 1 0>, - <&gpio0 4 0>, - <&gpiod 6 0>, - <&gpio3 2 0>, - <&gpio3 5 0>, - <&gpiod 7 0>, - <&gpio8 6 0>, - <&gpiod 4 0>, - <&gpio4 1 0>, - <&gpio3 4 0>, - <&gpioc 7 0>, - <&gpioa 4 0>, - <&gpio9 6 0>, - <&gpio9 3 0>, - <&gpioa 7 0>, - <&gpio5 0 0>, - <&gpio8 1 0>; - }; -}; - -/* Power switch logic input pads */ -&psl_in1 { - /* ACOK_OD */ - flag = <NPCX_PSL_RISING_EDGE>; -}; - -&psl_in2 { - /* EC_PWR_BTN_ODL */ - flag = <NPCX_PSL_FALLING_EDGE>; -}; - -&psl_in3 { - /* LID_OPEN_EC */ - flag = <NPCX_PSL_RISING_EDGE>; -}; - -&psl_in4 { - /* RTC_EC_WAKE_ODL */ - flag = <NPCX_PSL_FALLING_EDGE>; -}; |