diff options
Diffstat (limited to 'zephyr/projects/herobrine/prj.conf')
| -rw-r--r-- | zephyr/projects/herobrine/prj.conf | 160 |
1 files changed, 160 insertions, 0 deletions
diff --git a/zephyr/projects/herobrine/prj.conf b/zephyr/projects/herobrine/prj.conf new file mode 100644 index 0000000000..3391e60dce --- /dev/null +++ b/zephyr/projects/herobrine/prj.conf @@ -0,0 +1,160 @@ +# Copyright 2021 The ChromiumOS Authors +# Use of this source code is governed by a BSD-style license that can be +# found in the LICENSE file. + +CONFIG_CROS_EC=y +CONFIG_SHIMMED_TASKS=y +CONFIG_PLATFORM_EC=y +CONFIG_PLATFORM_EC_BRINGUP=y +CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y +CONFIG_PLATFORM_EC_SWITCH=y +CONFIG_PLATFORM_EC_LID_SWITCH=y +CONFIG_PLATFORM_EC_BACKLIGHT_LID=y +CONFIG_PLATFORM_EC_POWER_BUTTON=y +CONFIG_PLATFORM_EC_CBI_GPIO=y +CONFIG_KERNEL_SHELL=y +CONFIG_PLATFORM_EC_BOARD_RESET_AFTER_POWER_ON=y + +# I2C options +CONFIG_I2C=y +CONFIG_PLATFORM_EC_CONSOLE_CMD_I2C_SPEED=y +CONFIG_PLATFORM_EC_HOSTCMD_I2C_CONTROL=y + +# Shell history and tab autocompletion (for convenience) +CONFIG_SHELL_HELP=y +CONFIG_SHELL_HISTORY=y +CONFIG_SHELL_TAB=y +CONFIG_SHELL_TAB_AUTOCOMPLETION=y + +# LED +CONFIG_PLATFORM_EC_LED_COMMON=n +CONFIG_PLATFORM_EC_LED_DT=y + +# PWM +CONFIG_PWM=y +CONFIG_PWM_SHELL=n + +# Application Processor is Qualcomm SC7280 +CONFIG_AP_ARM_QUALCOMM_SC7280=y + +# GPIO Switchcap +CONFIG_PLATFORM_EC_SWITCHCAP_GPIO=y + +# Board version is selected over GPIO board ID pins. +CONFIG_PLATFORM_EC_BOARD_VERSION_GPIO=y + +# Power Sequencing +CONFIG_PLATFORM_EC_POWERSEQ=y +CONFIG_PLATFORM_EC_POWERSEQ_HOST_SLEEP=y +CONFIG_PLATFORM_EC_POWERSEQ_PP5000_CONTROL=n +CONFIG_PLATFORM_EC_POWER_SLEEP_FAILURE_DETECTION=y +CONFIG_PLATFORM_EC_CHIPSET_RESET_HOOK=y +CONFIG_PLATFORM_EC_CHIPSET_RESUME_INIT_HOOK=y + +# MKBP event +CONFIG_PLATFORM_EC_MKBP_EVENT=y +CONFIG_PLATFORM_EC_MKBP_USE_GPIO=y + +# Keyboard +CONFIG_PLATFORM_EC_KEYBOARD=y +CONFIG_PLATFORM_EC_KEYBOARD_PROTOCOL_MKBP=y +CONFIG_PLATFORM_EC_MKBP_INPUT_DEVICES=y +CONFIG_PLATFORM_EC_KEYBOARD_COL2_INVERTED=y +CONFIG_PLATFORM_EC_KEYBOARD_REFRESH_ROW3=y +CONFIG_PLATFORM_EC_VOLUME_BUTTONS=y +CONFIG_PLATFORM_EC_CMD_BUTTON=y +CONFIG_CROS_KB_RAW_NPCX=y + +# ADC +CONFIG_ADC=y +CONFIG_ADC_SHELL=n + +# Battery +CONFIG_PLATFORM_EC_BATTERY=y +CONFIG_PLATFORM_EC_BATTERY_SMART=y +CONFIG_PLATFORM_EC_I2C_VIRTUAL_BATTERY=y +CONFIG_PLATFORM_EC_I2C_PASSTHRU_RESTRICTED=y +CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y +CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y +CONFIG_PLATFORM_EC_BATTERY_PRESENT_GPIO=y +CONFIG_PLATFORM_EC_CHARGER_ISL9238C=y +CONFIG_PLATFORM_EC_CHARGE_RAMP_HW=y +CONFIG_PLATFORM_EC_USE_BATTERY_DEVICE_CHEMISTRY=y +CONFIG_PLATFORM_EC_BATTERY_DEVICE_CHEMISTRY="LION" +CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y +CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y +CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC_CHARGER=y +CONFIG_PLATFORM_EC_CHARGER_MIN_BAT_PCT_FOR_POWER_ON=2 +CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON=12500 +CONFIG_PLATFORM_EC_CHARGER_PROFILE_OVERRIDE=y +CONFIG_PLATFORM_EC_CHARGER_PSYS=y +CONFIG_PLATFORM_EC_CHARGER_PSYS_READ=y +CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10 +CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=20 +CONFIG_PLATFORM_EC_CONSOLE_CMD_CHARGER_ADC_AMON_BMON=y + +# USB-A +CONFIG_PLATFORM_EC_USBA=y + +# USB-C +CONFIG_PLATFORM_EC_USB_PD_FRS=y +CONFIG_PLATFORM_EC_BC12_DETECT_PI3USB9201=y +CONFIG_PLATFORM_EC_USB_PD_USB32_DRD=n +CONFIG_PLATFORM_EC_USBC_PPC_SN5S330=y +CONFIG_PLATFORM_EC_USBC_PPC_SYV682C=y +CONFIG_PLATFORM_EC_USBC_PPC_SYV682X=y +CONFIG_PLATFORM_EC_USB_PD_FRS_PPC=y +CONFIG_PLATFORM_EC_USBC_RETIMER_FW_UPDATE=n +CONFIG_PLATFORM_EC_USBC_SS_MUX_DFP_ONLY=y +CONFIG_PLATFORM_EC_USB_DRP_ACC_TRYSRC=y +CONFIG_PLATFORM_EC_USB_PD_5V_EN_CUSTOM=y +CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y +CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_PPC=y +CONFIG_PLATFORM_EC_USB_PD_DPS=y +CONFIG_PLATFORM_EC_USB_PD_REV30=y +CONFIG_PLATFORM_EC_USB_PD_TBT_COMPAT_MODE=n +CONFIG_PLATFORM_EC_USB_PD_USB4=n +CONFIG_PLATFORM_EC_USB_PD_TCPC_LOW_POWER=y +CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8805=y +CONFIG_PLATFORM_EC_USB_PD_TCPC_RUNTIME_CONFIG=n +CONFIG_PLATFORM_EC_USB_MUX_RUNTIME_CONFIG=n +CONFIG_PLATFORM_EC_USB_PD_LOGGING=y +CONFIG_PLATFORM_EC_CONFIG_USB_PD_3A_PORTS=2 + +# USB ID +# This is allocated specifically for Herobrine +# http://google3/hardware/standards/usb/ +# TODO(b/183608112): Move to device tree +CONFIG_PLATFORM_EC_USB_PID=0x5055 + +# RTC +CONFIG_PLATFORM_EC_RTC=y +CONFIG_CROS_RTC_NXP_PCF85063A=y +CONFIG_PLATFORM_EC_HOSTCMD_RTC=y +CONFIG_PLATFORM_EC_CONSOLE_CMD_RTC=y +CONFIG_PLATFORM_EC_CONSOLE_CMD_RTC_ALARM=y + +# EC software sync +CONFIG_PLATFORM_EC_VBOOT_HASH=y + +# Sensors +CONFIG_PLATFORM_EC_MOTIONSENSE=y +CONFIG_PLATFORM_EC_ACCEL_FIFO=y +CONFIG_PLATFORM_EC_ACCEL_SPOOF_MODE=y +CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y +CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y +CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y +CONFIG_PLATFORM_EC_LID_ANGLE=y +CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y +CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y +CONFIG_PLATFORM_EC_TABLET_MODE=y +CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=y +CONFIG_PLATFORM_EC_MAX_SENSOR_FREQ_MILLIHZ=100000 + +# Sensor Drivers +CONFIG_PLATFORM_EC_ACCEL_BMA255=y +CONFIG_PLATFORM_EC_ACCELGYRO_BMI260=y +CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y + +CONFIG_SYSCON=y +CONFIG_PLATFORM_EC_EMULATED_SYSRQ=y |