diff options
Diffstat (limited to 'zephyr/projects/nissa/prj.conf')
| -rw-r--r-- | zephyr/projects/nissa/prj.conf | 22 |
1 files changed, 13 insertions, 9 deletions
diff --git a/zephyr/projects/nissa/prj.conf b/zephyr/projects/nissa/prj.conf index df988de149..7a46a14076 100644 --- a/zephyr/projects/nissa/prj.conf +++ b/zephyr/projects/nissa/prj.conf @@ -1,4 +1,4 @@ -# Copyright 2021 The Chromium OS Authors. All rights reserved. +# Copyright 2021 The ChromiumOS Authors # Use of this source code is governed by a BSD-style license that can be # found in the LICENSE file. @@ -38,13 +38,13 @@ CONFIG_PLATFORM_EC_VBOOT_HASH=y CONFIG_AP=y CONFIG_AP_X86_INTEL_ADL=y CONFIG_ESPI=y -CONFIG_ESPI_LOG_LEVEL_ERR=y -CONFIG_PLATFORM_EC_ESPI_VW_SLP_S4=y -CONFIG_PLATFORM_EC_ESPI_VW_SLP_S5=y +CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S4=y +CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S5=y CONFIG_PLATFORM_EC_HOSTCMD=y CONFIG_HCDEBUG_OFF=y CONFIG_PLATFORM_EC_THROTTLE_AP=y CONFIG_PLATFORM_EC_PORT80=y +CONFIG_PLATFORM_EC_PORT80_QUIET=y # AP Power Sequencing CONFIG_AP_PWRSEQ=y @@ -52,6 +52,7 @@ CONFIG_X86_NON_DSX_PWRSEQ_ADL=y CONFIG_X86_NON_DSX_PWRSEQ_CONSOLE=y CONFIG_X86_NON_DSX_PWRSEQ_HOST_CMD=y CONFIG_AP_PWRSEQ_S0IX=y +CONFIG_AP_PWRSEQ_S0IX_ERROR_RECOVERY=y # I2C CONFIG_I2C=y @@ -79,7 +80,6 @@ CONFIG_PLATFORM_EC_MKBP_USE_GPIO_AND_HOST_EVENT=y # Temperature sensor support CONFIG_PLATFORM_EC_TEMP_SENSOR=y CONFIG_PLATFORM_EC_THERMISTOR=y -CONFIG_PLATFORM_EC_TEMP_SENSOR_POWER=y CONFIG_PLATFORM_EC_TEMP_SENSOR_FIRST_READ_DELAY=y # CBI EEPROM support @@ -115,14 +115,11 @@ CONFIG_PLATFORM_EC_USB_PID=0x505a CONFIG_PLATFORM_EC_USB_PD_USB4=n CONFIG_PLATFORM_EC_USB_PD_TBT_COMPAT_MODE=n -# TODO(b/216085548): configure USB retimers CONFIG_PLATFORM_EC_USB_MUX_RUNTIME_CONFIG=y CONFIG_PLATFORM_EC_USB_MUX_VIRTUAL=y # ADL integrated muxes are slow: unblock PD CONFIG_PLATFORM_EC_USB_MUX_TASK=y CONFIG_PLATFORM_EC_BC12_DETECT_PI3USB9201=y -# TODO(b/226411332): fix single task USB_CHG for Nissa -CONFIG_PLATFORM_EC_USB_CHARGER_SINGLE_TASK=n # USB-C TCPC and PPC standard options CONFIG_PLATFORM_EC_USB_PD_TCPC_LOW_POWER=y @@ -135,6 +132,8 @@ CONFIG_PLATFORM_EC_USB_PORT_ENABLE_DYNAMIC=y # either SLGC55545 or PI5USB2546. CONFIG_PLATFORM_EC_USB_PORT_POWER_SMART=y CONFIG_PLATFORM_EC_USB_PORT_POWER_SMART_CDP_SDP_ONLY=y +CONFIG_PLATFORM_EC_USB_PORT_POWER_SMART_DEFAULT_CDP=y +CONFIG_PLATFORM_EC_USB_PORT_POWER_SMART_INVERTED=y # Battery support CONFIG_PLATFORM_EC_BATTERY=y @@ -146,8 +145,13 @@ CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y # Charger support CONFIG_PLATFORM_EC_CHARGER=y -CONFIG_PLATFORM_EC_OCPC=y CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10 CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=10 CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC_CHARGER=y + +# Dynamically select PD voltage to maximize charger efficiency +CONFIG_PLATFORM_EC_USB_PD_DPS=y +# Reduce logging so that state transitions do not cause protocol issues +# pd dump [1-3] can be used to increase the debugging level +CONFIG_PLATFORM_EC_USB_PD_INITIAL_DEBUG_LEVEL=0 |