diff options
Diffstat (limited to 'zephyr/projects/rex/prj.conf')
| -rw-r--r-- | zephyr/projects/rex/prj.conf | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/zephyr/projects/rex/prj.conf b/zephyr/projects/rex/prj.conf new file mode 100644 index 0000000000..96f407b903 --- /dev/null +++ b/zephyr/projects/rex/prj.conf @@ -0,0 +1,172 @@ +# Copyright 2022 The ChromiumOS Authors +# Use of this source code is governed by a BSD-style license that can be +# found in the LICENSE file. + +CONFIG_PLATFORM_EC=y +CONFIG_CROS_EC=y +CONFIG_SHIMMED_TASKS=y +CONFIG_SYSCON=y +# Enable during development +CONFIG_LTO=n +CONFIG_PLATFORM_EC_SYSTEM_UNLOCKED=y + +# Shell Commands +CONFIG_SHELL_HELP=y +CONFIG_SHELL_HISTORY=y +CONFIG_SHELL_TAB=y +CONFIG_SHELL_TAB_AUTOCOMPLETION=y +CONFIG_KERNEL_SHELL=y + +# Logging +CONFIG_LOG=y +CONFIG_LOG_MODE_MINIMAL=y + +# Disable default features we don't want in a minimal example. +CONFIG_PLATFORM_EC_BACKLIGHT_LID=y +CONFIG_PLATFORM_EC_SWITCH=y +CONFIG_PLATFORM_EC_VBOOT_EFS2=n + +# Application processor; communicates with EC via eSPI +CONFIG_AP=y +CONFIG_ESPI=y +CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S3=y +CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S4=y +CONFIG_PLATFORM_EC_HOST_INTERFACE_ESPI_VW_SLP_S5=y +CONFIG_PLATFORM_EC_HOSTCMD=y +# Disabling this until temp sensor support is in +CONFIG_PLATFORM_EC_THROTTLE_AP=n +CONFIG_PLATFORM_EC_PORT80=y + +# Power Sequecing +CONFIG_AP_X86_INTEL_MTL=y +CONFIG_X86_NON_DSX_PWRSEQ_MTL=y +CONFIG_X86_NON_DSX_PWRSEQ_HOST_CMD=y +# TODO (b/240434243): This may be needed, but using eSPI VW for now +CONFIG_PLATFORM_EC_POWERSEQ_SLP_S3_L_OVERRIDE=n +CONFIG_PLATFORM_EC_POWERSEQ_PP5000_CONTROL=n + +# Zephyr Inbuilt AP Power Sequencing Config +CONFIG_AP_PWRSEQ=y +CONFIG_X86_NON_DSX_PWRSEQ_CONSOLE=y +CONFIG_AP_PWRSEQ_S0IX=y + +# ADC +CONFIG_ADC=y + +# I2C +CONFIG_I2C=y + +# PWM +CONFIG_PWM=y + +# Fan +CONFIG_TACH_NPCX=y + +# Temperature sensors +CONFIG_SENSOR=y +CONFIG_PLATFORM_EC_TEMP_SENSOR=y +CONFIG_PLATFORM_EC_THERMISTOR=y +CONFIG_PLATFORM_EC_TEMP_SENSOR_POWER=y + +# CBI EEPROM support +CONFIG_EEPROM=y +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_SHELL=n +CONFIG_PLATFORM_EC_CBI_EEPROM=y +CONFIG_PLATFORM_EC_BOARD_VERSION_CBI=y +CONFIG_PLATFORM_EC_BYPASS_CBI_EEPROM_WP_CHECK=y + +# LED +CONFIG_PLATFORM_EC_LED_DT=y + +# Battery +CONFIG_PLATFORM_EC_BATTERY=y +CONFIG_PLATFORM_EC_BATTERY_SMART=y +CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y +CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y +CONFIG_PLATFORM_EC_BATTERY_PRESENT_GPIO=y +CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y + +# Charger +CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y +CONFIG_PLATFORM_EC_CHARGER_INPUT_CURRENT=512 +CONFIG_PLATFORM_EC_CHARGER_ISL9241=y +CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=5 +CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=10 +CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON=30000 +CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT=15000 + +# USB-A +CONFIG_PLATFORM_EC_USBA=y + +# USBC +CONFIG_PLATFORM_EC_USBC_PPC=y +CONFIG_PLATFORM_EC_USBC_PPC_SYV682X=y +CONFIG_PLATFORM_EC_USBC_PPC_SYV682C=y +CONFIG_PLATFORM_EC_USBC_PPC_SYV682X_SMART_DISCHARGE=y + +CONFIG_PLATFORM_EC_USB_DRP_ACC_TRYSRC=y +CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y +CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_PPC=y +CONFIG_PLATFORM_EC_USB_PD_FRS=y +CONFIG_PLATFORM_EC_USB_PD_FRS_PPC=y +CONFIG_PLATFORM_EC_USB_PD_TCPC_LOW_POWER=y +CONFIG_PLATFORM_EC_USB_PD_TCPM_TCPCI=y +CONFIG_PLATFORM_EC_USB_PD_TCPM_NCT38XX=y +CONFIG_PLATFORM_EC_USB_PD_TRY_SRC=y +CONFIG_PLATFORM_EC_USB_PD_DUAL_ROLE_AUTO_TOGGLE=y +CONFIG_PLATFORM_EC_USBC_RETIMER_INTEL_HB=y +CONFIG_PLATFORM_EC_USBC_VCONN=y +CONFIG_PLATFORM_EC_USB_PD_TBT_COMPAT_MODE=y +CONFIG_PLATFORM_EC_USB_PD_VBUS_MEASURE_CHARGER=y +CONFIG_PLATFORM_EC_USB_PID=0x504D + +# IOEX +CONFIG_GPIO_NCT38XX=y + +# BC 1.2 +CONFIG_PLATFORM_EC_BC12_DETECT_PI3USB9201=y + +#USB Mux +CONFIG_PLATFORM_EC_USB_MUX_VIRTUAL=y +CONFIG_PLATFORM_EC_USB_MUX_TASK=y + +# External power +CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y + +# Standard shimmed features +CONFIG_PLATFORM_EC_POWER_BUTTON=y +CONFIG_PLATFORM_EC_LID_SWITCH=y + +# Keyboard support +CONFIG_PLATFORM_EC_KEYBOARD=y +CONFIG_PLATFORM_EC_KEYBOARD_PROTOCOL_8042=y +# Column 2 is driven through the GSC, which inverts the signal going through it +CONFIG_PLATFORM_EC_KEYBOARD_COL2_INVERTED=y + +# MKBP event +CONFIG_PLATFORM_EC_MKBP_EVENT=y +CONFIG_PLATFORM_EC_MKBP_INPUT_DEVICES=y +CONFIG_PLATFORM_EC_MKBP_USE_GPIO_AND_HOST_EVENT=y + +# Sensors console command +CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y +CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y + +# Sensors +CONFIG_SENSOR=y +CONFIG_SENSOR_SHELL=n +CONFIG_PLATFORM_EC_MOTIONSENSE=y +CONFIG_PLATFORM_EC_ACCEL_FIFO=y +CONFIG_PLATFORM_EC_DYNAMIC_MOTION_SENSOR_COUNT=y +CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y +CONFIG_PLATFORM_EC_LID_ANGLE=y +CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y +CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y +CONFIG_PLATFORM_EC_TABLET_MODE=y +CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=y + +# Sensor Drivers +CONFIG_PLATFORM_EC_ACCELGYRO_LSM6DSO=y +CONFIG_PLATFORM_EC_ACCEL_LIS2DW12=y +CONFIG_PLATFORM_EC_ALS_TCS3400=y |