diff options
Diffstat (limited to 'zephyr/projects/skyrim/interrupts.dts')
| -rw-r--r-- | zephyr/projects/skyrim/interrupts.dts | 146 |
1 files changed, 146 insertions, 0 deletions
diff --git a/zephyr/projects/skyrim/interrupts.dts b/zephyr/projects/skyrim/interrupts.dts new file mode 100644 index 0000000000..de4e87986a --- /dev/null +++ b/zephyr/projects/skyrim/interrupts.dts @@ -0,0 +1,146 @@ +/* Copyright 2022 The ChromiumOS Authors + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/ { + gpio-interrupts { + compatible = "cros-ec,gpio-interrupts"; + + int_lid_open: lid_open { + irq-pin = <&gpio_lid_open>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "lid_interrupt"; + }; + int_ac_present: ac_present { + irq-pin = <&gpio_acok_od>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "extpower_interrupt"; + }; + int_power_button: power_button { + irq-pin = <&gpio_mech_pwr_btn_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "power_button_interrupt"; + }; + int_slp_s3: slp_s3 { + irq-pin = <&gpio_slp_s3_l>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "baseboard_en_pwr_s0"; + }; + int_slp_s5: slp_s5 { + irq-pin = <&gpio_slp_s5_l>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "baseboard_set_en_pwr_s3"; + }; + int_s5_pgood: s5_pgood { + irq-pin = <&gpio_pg_pwr_s5>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "baseboard_s5_pgood"; + }; + int_pg_groupc_s0: pg_groupc_s0 { + irq-pin = <&gpio_pg_groupc_s0_od>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "baseboard_set_en_pwr_pcore"; + }; + int_pg_lpddr_s3: pg_lpddr_s3 { + irq-pin = <&gpio_pg_lpddr5_s3_od>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "baseboard_set_en_pwr_pcore"; + }; + int_pg_lpddr_s0: pg_lpddr_s0 { + irq-pin = <&gpio_pg_lpddr5_s0_od>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "baseboard_set_soc_pwr_pgood"; + }; + int_s0_pgood: s0_pgood { + irq-pin = <&gpio_s0_pgood>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "baseboard_s0_pgood"; + }; + int_soc_thermtrip: soc_thermtrip { + irq-pin = <&gpio_soc_thermtrip_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "baseboard_soc_thermtrip"; + }; + int_soc_pcore_ocp: soc_pcore_ocp { + irq-pin = <&gpio_pcore_ocp_r_l>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "baseboard_soc_pcore_ocp"; + }; + int_volume_up: volume_up { + irq-pin = <&gpio_volup_btn_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "button_interrupt"; + }; + int_volume_down: volume_down { + irq-pin = <&gpio_voldn_btn_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "button_interrupt"; + }; + int_usb_a0_fault: a0_fault { + irq-pin = <&ioex_usb_a0_fault_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "usb_fault_interrupt"; + }; + int_usb_a1_fault: a1_fault { + irq-pin = <&ioex_usb_a1_fault_db_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "usb_fault_interrupt"; + }; + int_usb_c0_sbu_fault: c0_sbu_fault { + irq-pin = <&ioex_usb_c0_sbu_fault_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "sbu_fault_interrupt"; + }; + int_usb_c1_sbu_fault: c1_sbu_fault { + irq-pin = <&ioex_usb_c1_sbu_fault_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "sbu_fault_interrupt"; + }; + int_usb_c0_tcpc: usb_c0_tcpc { + irq-pin = <&gpio_usb_c0_tcpc_int_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "tcpc_alert_event"; + }; + int_usb_c1_tcpc: usb_c1_tcpc { + irq-pin = <&gpio_usb_c1_tcpc_int_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "tcpc_alert_event"; + }; + int_usb_c0_ppc: usb_c0_ppc { + irq-pin = <&gpio_usb_c0_ppc_int_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "ppc_interrupt"; + }; + int_usb_c1_ppc: usb_c1_ppc { + irq-pin = <&gpio_usb_c1_ppc_int_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "ppc_interrupt"; + }; + int_usb_c0_bc12: usb_c0_bc12 { + irq-pin = <&gpio_usb_c0_bc12_int_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "bc12_interrupt"; + }; + int_usb_c1_bc12: usb_c1_bc12 { + irq-pin = <&gpio_usb_c1_bc12_int_odl>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "bc12_interrupt"; + }; + int_usb_hub_fault: hub_fault { + irq-pin = <&gpio_usb_hub_fault_q_odl>; + flags = <GPIO_INT_EDGE_BOTH>; + handler = "usb_fault_interrupt"; + }; + int_usb_pd_soc: usb_pd_soc { + irq-pin = <&gpio_ec_i2c_usbc_pd_int>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "usb_pd_soc_interrupt"; + }; + int_accel_gyro: accel_gyro { + irq-pin = <&gpio_accel_gyro_int_l>; + flags = <GPIO_INT_EDGE_FALLING>; + handler = "bmi3xx_interrupt"; + }; + }; +}; |