diff options
Diffstat (limited to 'zephyr/projects/trogdor/trogdor/prj.conf')
| -rw-r--r-- | zephyr/projects/trogdor/trogdor/prj.conf | 152 |
1 files changed, 0 insertions, 152 deletions
diff --git a/zephyr/projects/trogdor/trogdor/prj.conf b/zephyr/projects/trogdor/trogdor/prj.conf deleted file mode 100644 index 59d87f54a1..0000000000 --- a/zephyr/projects/trogdor/trogdor/prj.conf +++ /dev/null @@ -1,152 +0,0 @@ -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_CROS_EC=y -CONFIG_SHIMMED_TASKS=y -CONFIG_PLATFORM_EC=y -CONFIG_PLATFORM_EC_BRINGUP=y -CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y -CONFIG_PLATFORM_EC_SWITCH=y -CONFIG_PLATFORM_EC_LID_SWITCH=y -CONFIG_PLATFORM_EC_BACKLIGHT_LID=y -CONFIG_PLATFORM_EC_POWER_BUTTON=y -CONFIG_I2C=y - -# LED -CONFIG_PLATFORM_EC_LED_COMMON=y - -# PWM -CONFIG_PWM=y -CONFIG_PWM_SHELL=n -CONFIG_PLATFORM_EC_PWM=y -CONFIG_PLATFORM_EC_PWM_DISPLIGHT=y -CONFIG_PLATFORM_EC_PWM_KBLIGHT=y - -# Application Processor is Qualcomm SC7180 -CONFIG_AP_ARM_QUALCOMM_SC7180=y - -# Board version is selected over GPIO board ID pins. -CONFIG_PLATFORM_EC_BOARD_VERSION_GPIO=y - -# Power Sequencing -CONFIG_PLATFORM_EC_POWERSEQ=y -CONFIG_PLATFORM_EC_POWERSEQ_HOST_SLEEP=y -CONFIG_PLATFORM_EC_POWER_SLEEP_FAILURE_DETECTION=y -CONFIG_PLATFORM_EC_CHIPSET_RESET_HOOK=y -CONFIG_PLATFORM_EC_CHIPSET_RESUME_INIT_HOOK=y - -# Trogdor family does not use EFS2. -CONFIG_PLATFORM_EC_VBOOT_EFS2=n - -# MKBP event mask -CONFIG_PLATFORM_EC_MKBP_EVENT_WAKEUP_MASK=y -CONFIG_PLATFORM_EC_MKBP_HOST_EVENT_WAKEUP_MASK=y - -# MKBP event -CONFIG_PLATFORM_EC_MKBP_EVENT=y -CONFIG_PLATFORM_EC_MKBP_USE_GPIO=y - -# Keyboard -CONFIG_PLATFORM_EC_KEYBOARD=y -CONFIG_PLATFORM_EC_KEYBOARD_PROTOCOL_MKBP=y -CONFIG_PLATFORM_EC_MKBP_INPUT_DEVICES=y -CONFIG_PLATFORM_EC_KEYBOARD_COL2_INVERTED=y -CONFIG_PLATFORM_EC_VOLUME_BUTTONS=y -CONFIG_PLATFORM_EC_CMD_BUTTON=y -CONFIG_CROS_KB_RAW_NPCX=y - -# ADC -CONFIG_PLATFORM_EC_ADC=y -CONFIG_ADC=y -CONFIG_ADC_SHELL=n - -# Battery -CONFIG_HAS_TASK_USB_CHG_P1=y -CONFIG_PLATFORM_EC_BATTERY=y -CONFIG_PLATFORM_EC_BATTERY_SMART=y -CONFIG_PLATFORM_EC_I2C_VIRTUAL_BATTERY=y -CONFIG_PLATFORM_EC_I2C_PASSTHRU_RESTRICTED=y -CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y -CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y -CONFIG_PLATFORM_EC_BATTERY_PRESENT_GPIO=y -CONFIG_PLATFORM_EC_CHARGER_ISL9238=y -CONFIG_PLATFORM_EC_CHARGE_RAMP_HW=y -CONFIG_PLATFORM_EC_USE_BATTERY_DEVICE_CHEMISTRY=y -CONFIG_PLATFORM_EC_BATTERY_DEVICE_CHEMISTRY="LION" -CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC_CHARGER=y -CONFIG_PLATFORM_EC_CHARGER_MIN_BAT_PCT_FOR_POWER_ON=2 -CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON=10000 -CONFIG_PLATFORM_EC_CHARGER_PROFILE_OVERRIDE=y -CONFIG_PLATFORM_EC_CHARGER_PSYS=y -CONFIG_PLATFORM_EC_CHARGER_PSYS_READ=y -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10 -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=20 -CONFIG_PLATFORM_EC_CONSOLE_CMD_CHARGER_ADC_AMON_BMON=y - -# USB-A -CONFIG_PLATFORM_EC_USB_A_PORT_COUNT=1 - -# USB-C -CONFIG_PLATFORM_EC_BC12_DETECT_PI3USB9201=y -CONFIG_PLATFORM_EC_USB_PD_USB32_DRD=n -CONFIG_PLATFORM_EC_USBC_PPC_SN5S330=y -CONFIG_PLATFORM_EC_USBC_RETIMER_FW_UPDATE=n -CONFIG_PLATFORM_EC_USBC_SS_MUX_DFP_ONLY=y -CONFIG_PLATFORM_EC_USB_DRP_ACC_TRYSRC=y -CONFIG_PLATFORM_EC_USB_PD_5V_EN_CUSTOM=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y -CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_PPC=y -CONFIG_PLATFORM_EC_USB_PD_PORT_MAX_COUNT=2 -CONFIG_PLATFORM_EC_USB_PD_REV30=n -CONFIG_PLATFORM_EC_USB_PD_TCPC_LOW_POWER=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8805=y -CONFIG_PLATFORM_EC_USB_PD_TCPC_RUNTIME_CONFIG=n -CONFIG_PLATFORM_EC_USB_PD_LOGGING=y -CONFIG_PLATFORM_EC_USB_PORT_POWER_DUMB=y -CONFIG_HAS_TASK_PD_C1=y -CONFIG_HAS_TASK_PD_INT_C1=y - -# USB ID -# This is allocated specifically for Trogdor -# http://google3/hardware/standards/usb/ -# TODO(b/183608112): Move to device tree -CONFIG_PLATFORM_EC_USB_PID=0x5043 - -# RTC -CONFIG_PLATFORM_EC_RTC=y -CONFIG_CROS_RTC_NPCX=y -CONFIG_PLATFORM_EC_HOSTCMD_RTC=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_RTC=y - -# EC software sync -CONFIG_PLATFORM_EC_VBOOT_HASH=y - -# Serial Host Interface (SHI) device. -CONFIG_CROS_SHI_NPCX=y - -# Sensors -CONFIG_PLATFORM_EC_MOTIONSENSE=y -CONFIG_PLATFORM_EC_ACCEL_FIFO=y -CONFIG_PLATFORM_EC_ACCEL_INTERRUPTS=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCELS=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_ACCEL_INFO=y -CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y -CONFIG_PLATFORM_EC_LID_ANGLE=y -CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y -CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y -CONFIG_PLATFORM_EC_TABLET_MODE=y -CONFIG_PLATFORM_EC_TABLET_MODE_SWITCH=y - -# Sensor Drivers -CONFIG_PLATFORM_EC_ACCEL_BMA255=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI160=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y - -CONFIG_SYSCON=y - -# Features should be enabled. But the code RAM is not enough, disable them. -#CONFIG_PLATFORM_EC_ACCEL_SPOOF_MODE=y -#CONFIG_PLATFORM_EC_EMULATED_SYSRQ=y |