diff options
Diffstat (limited to 'zephyr/projects/volteer')
19 files changed, 0 insertions, 1947 deletions
diff --git a/zephyr/projects/volteer/delbin/CMakeLists.txt b/zephyr/projects/volteer/delbin/CMakeLists.txt deleted file mode 100644 index 0303ee7c62..0000000000 --- a/zephyr/projects/volteer/delbin/CMakeLists.txt +++ /dev/null @@ -1,23 +0,0 @@ -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -cmake_minimum_required(VERSION 3.13.1) - -find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE}) -project(delbin) - -set(PLATFORM_EC_BOARD "${PLATFORM_EC}/board/delbin" CACHE PATH - "Path to the platform/ec board directory") -set(PLATFORM_EC_BASEBOARD "${PLATFORM_EC}/baseboard/volteer" CACHE PATH - "Path to the platform/ec baseboard directory") - -# Include board specific header files -zephyr_library_include_directories( - include - "${PLATFORM_EC_BASEBOARD}" - "${PLATFORM_EC_BOARD}") - -# Include selected EC source for the baseboard -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_POWERSEQ - "${PLATFORM_EC_BASEBOARD}/power.c") diff --git a/zephyr/projects/volteer/delbin/gpio.dts b/zephyr/projects/volteer/delbin/gpio.dts deleted file mode 100644 index 7d7a89d4f2..0000000000 --- a/zephyr/projects/volteer/delbin/gpio.dts +++ /dev/null @@ -1,349 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - named-gpios { - compatible = "named-gpios"; - - ec_lid_open { - gpios = <&gpiod 2 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - label = "EC_LID_OPEN"; - }; - ec_wp_l { - gpios = <&gpioa 1 GPIO_INPUT>; - enum-name = "GPIO_WP_L"; - label = "EC_WP_L"; - }; - h1_ec_pwr_btn_odl { - gpios = <&gpio0 1 GPIO_INPUT>; - enum-name = "GPIO_POWER_BUTTON_L"; - label = "H1_EC_PWR_BTN_ODL"; - }; - acok_od { - gpios = <&gpio0 0 GPIO_INPUT>; - enum-name = "GPIO_AC_PRESENT"; - label = "ACOK_OD"; - }; - slp_s0_l { - gpios = <&gpiod 5 GPIO_INPUT>; - enum-name = "GPIO_PCH_SLP_S0_L"; - label = "SLP_S0_L"; - }; - slp_s3_l { - gpios = <&gpioa 5 GPIO_INPUT>; - enum-name = "GPIO_PCH_SLP_S3_L"; - label = "SLP_S3_L"; - }; - slp_sus_l { - gpios = <&gpiod 7 GPIO_INPUT>; - enum-name = "GPIO_SLP_SUS_L"; - label = "SLP_SUS_L"; - }; - pg_ec_rsmrst_odl { - gpios = <&gpioe 2 GPIO_INPUT>; - enum-name = "GPIO_PG_EC_RSMRST_ODL"; - label = "PG_EC_RSMRST_ODL"; - }; - rsmrst_l_pgood { - gpios = <&gpioe 2 GPIO_INPUT>; - enum-name = "GPIO_RSMRST_L_PGOOD"; - label = "RSMRST_L_PGOOD"; - }; - dsw_pwrok { - gpios = <&gpioc 7 GPIO_INPUT>; - enum-name = "GPIO_PG_EC_DSW_PWROK"; - label = "DSW_PWROK"; - }; - pg_ec_all_sys_pwrgd { - gpios = <&gpiof 4 GPIO_INPUT>; - enum-name = "GPIO_PG_EC_ALL_SYS_PWRGD"; - label = "PG_EC_ALL_SYS_PWRGD"; - }; - gpio_ec_imu_int_l: ec_imu_int_l { - gpios = <&gpio5 6 GPIO_INPUT>; - enum-name = "GPIO_EC_IMU_INT_L"; - label = "EC_IMU_INT_L"; - }; - tablet_mode_l { - gpios = <&gpio9 5 GPIO_INPUT>; - enum-name = "GPIO_TABLET_MODE_L"; - label = "TABLET_MODE_L"; - }; - ec_accel_int { - gpios = <&gpio8 1 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "EC_ACCEL_INT"; - }; - usb_c0_tcpc_int_odl { - gpios = <&gpioe 0 GPIO_INPUT>; - label = "USB_C0_TCPC_INT_ODL"; - }; - usb_c1_tcpc_int_odl { - gpios = <&gpioa 2 GPIO_INPUT>; - label = "USB_C1_TCPC_INT_ODL"; - }; - usb_c0_ppc_int_odl { - gpios = <&gpio6 2 GPIO_INPUT>; - label = "USB_C0_PPC_INT_ODL"; - }; - usb_c1_ppc_int_odl { - gpios = <&gpiof 5 GPIO_INPUT>; - label = "USB_C1_PPC_INT_ODL"; - }; - usb_c0_bc12_int_odl { - gpios = <&gpioe 4 GPIO_INPUT>; - label = "USB_C0_BC12_INT_ODL"; - }; - usb_c1_mix_int_odl { - gpios = <&gpio0 3 GPIO_INPUT>; - label = "USB_C1_MIX_INT_ODL"; - }; - ec_voldn_btn_odl { - gpios = <&gpio9 3 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "EC_VOLDN_BTN_ODL"; - }; - ec_volup_btn_odl { - gpios = <&gpio9 7 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "EC_VOLUP_BTN_ODL"; - }; - en_pp3300_a { - gpios = <&gpioa 3 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_PP3300_A"; - label = "EN_PP3300_A"; - }; - en_pp5000_a { - gpios = <&gpioa 4 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_PP5000"; - label = "EN_PP5000_A"; - }; - en_ppvar_vccin { - gpios = <&gpio4 3 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_PPVAR_VCCIN"; - label = "EN_PPVAR_VCCIN"; - }; - ec_rst_odl { - gpios = <&gpio0 2 GPIO_INPUT>; - label = "EC_RST_ODL"; - }; - ec_pch_sys_pwrok { - gpios = <&gpio3 7 GPIO_OUT_LOW>; - enum-name = "GPIO_EC_PCH_SYS_PWROK"; - label = "EC_PCH_SYS_PWROK"; - }; - ec_pch_rsmrst_odl { - gpios = <&gpioa 6 GPIO_ODR_LOW>; - enum-name = "GPIO_PCH_RSMRST_L"; - label = "EC_PCH_RSMRST_ODL"; - }; - ec_pch_pwr_btn_odl { - gpios = <&gpioc 1 GPIO_ODR_HIGH>; - enum-name = "GPIO_PCH_PWRBTN_L"; - label = "EC_PCH_PWR_BTN_ODL"; - }; - ec_pch_rtcrst { - gpios = <&gpio7 6 GPIO_OUT_LOW>; - enum-name = "GPIO_PCH_RTCRST"; - label = "EC_PCH_RTCRST"; - }; - ec_pch_wake_odl { - gpios = <&gpio7 4 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_PCH_WAKE_ODL"; - label = "EC_PCH_WAKE_ODL"; - }; - ec_entering_rw { - gpios = <&gpioe 3 GPIO_OUT_LOW>; - enum-name = "GPIO_ENTERING_RW"; - label = "EC_ENTERING_RW"; - }; - ec_prochot_odl { - gpios = <&gpio6 3 GPIO_ODR_HIGH>; - enum-name = "GPIO_CPU_PROCHOT"; - label = "EC_PROCHOT_ODL"; - }; - ec_prochot_in_l { - gpios = <&gpiof 0 GPIO_INPUT>; - enum-name = "GPIO_EC_PROCHOT_IN_L"; - label = "EC_PROCHOT_IN_L"; - }; - sys_rst_odl { - gpios = <&gpioc 5 GPIO_ODR_HIGH>; - enum-name = "GPIO_SYS_RESET_L"; - label = "SYS_RST_ODL"; - }; - ec_pch_int_odl { - gpios = <&gpiob 0 GPIO_ODR_HIGH>; - label = "EC_PCH_INT_ODL"; - }; - en_pp5000_usba { - gpios = <&gpioc 6 GPIO_OUT_LOW>; - label = "EN_PP5000_USBA"; - }; - usb_a_low_pwr_od { - gpios = <&gpio6 6 GPIO_ODR_LOW>; - label = "USB_A_LOW_PWR_OD"; - }; - usb_c0_rt_rst_odl { - gpios = <&gpiod 4 GPIO_ODR_LOW>; - label = "USB_C0_RT_RST_ODL"; - }; - usb_c1_rt_rst_odl { - gpios = <&gpio8 3 GPIO_ODR_LOW>; - label = "USB_C1_RT_RST_ODL"; - }; - usb_c0_oc_odl { - gpios = <&gpiob 1 GPIO_ODR_HIGH>; - label = "USB_C0_OC_ODL"; - }; - usb_c1_oc_odl { - gpios = <&gpio5 0 GPIO_ODR_HIGH>; - label = "USB_C1_OC_ODL"; - }; - uart2_ec_rx { - gpios = <&gpio7 5 GPIO_OUT_LOW>; - label = "UART2_EC_RX"; - }; - led_1_l { - gpios = <&gpioc 4 GPIO_OUT_HIGH>; - label = "LED_1_L"; - }; - led_2_l { - gpios = <&gpioc 3 GPIO_OUT_HIGH>; - label = "LED_2_L"; - }; - led_3_l { - gpios = <&gpioc 2 GPIO_OUT_HIGH>; - label = "LED_3_L"; - }; - ccd_mode_odl { - gpios = <&gpioe 5 GPIO_INPUT>; - label = "CCD_MODE_ODL"; - }; - ec_kb_bl_en { - gpios = <&gpio8 6 GPIO_OUT_LOW>; - label = "EC_KB_BL_EN"; - }; - unused_gpio34 { - gpios = <&gpio3 4 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "UNUSED_GPIO34"; - }; - unused_gpio41 { - gpios = <&gpio4 1 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "UNUSED_GPIO41"; - }; - unused_gpio72 { - gpios = <&gpio7 2 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "UNUSED_GPIO72"; - }; - unused_gpio96 { - gpios = <&gpio9 6 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "UNUSED_GPIO96"; - }; - unused_gpioa7 { - gpios = <&gpioa 7 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "UNUSED_GPIOA7"; - }; - unused_gpioc0 { - gpios = <&gpioc 0 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "UNUSED_GPIOC0"; - }; - unused_gpiof2 { - gpios = <&gpiof 2 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "UNUSED_GPIOF2"; - }; - ec_edp_bl_en { - gpios = <&gpiod 3 GPIO_OUT_HIGH>; - enum-name = "GPIO_ENABLE_BACKLIGHT"; - label = "EC_EDP_BL_EN"; - }; - ec_i2c0_sensor_scl { - gpios = <&gpiob 5 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C0_SENSOR_SCL"; - label = "EC_I2C0_SENSOR_SCL"; - }; - ec_i2c0_sensor_sda { - gpios = <&gpiob 4 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C0_SENSOR_SDA"; - label = "EC_I2C0_SENSOR_SDA"; - }; - ec_i2c1_usb_c0_scl { - gpios = <&gpio9 0 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C1_USB_C0_SCL"; - label = "EC_I2C1_USB_C0_SCL"; - }; - ec_i2c1_usb_c0_sda { - gpios = <&gpio8 7 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C1_USB_C0_SDA"; - label = "EC_I2C1_USB_C0_SDA"; - }; - ec_i2c2_usb_c1_scl { - gpios = <&gpio9 2 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C2_USB_C1_SCL"; - label = "EC_I2C2_USB_C1_SCL"; - }; - ec_i2c2_usb_c1_sda { - gpios = <&gpio9 1 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C2_USB_C1_SDA"; - label = "EC_I2C2_USB_C1_SDA"; - }; - ec_i2c3_usb_1_mix_scl { - gpios = <&gpiod 1 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C3_USB_1_MIX_SCL"; - label = "EC_I2C3_USB_1_MIX_SCL"; - }; - ec_i2c3_usb_1_mix_sda { - gpios = <&gpiod 0 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C3_USB_1_MIX_SDA"; - label = "EC_I2C3_USB_1_MIX_SDA"; - }; - ec_i2c5_power_scl { - gpios = <&gpio3 3 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C5_BATTERY_SCL"; - label = "EC_I2C5_POWER_SCL"; - }; - ec_i2c5_power_sda { - gpios = <&gpio3 6 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C5_BATTERY_SDA"; - label = "EC_I2C5_POWER_SDA"; - }; - ec_i2c7_eeprom_scl { - gpios = <&gpiob 3 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C7_EEPROM_PWR_SCL_R"; - label = "EC_I2C7_EEPROM_SCL"; - }; - ec_i2c7_eeprom_sda { - gpios = <&gpiob 2 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C7_EEPROM_PWR_SDA_R"; - label = "EC_I2C7_EEPROM_SDA"; - }; - ec_batt_pres_odl { - gpios = <&gpioe 1 GPIO_INPUT>; - label = "EC_BATT_PRES_ODL"; - }; - usb_c0_dp_hpd { - gpios = <&gpiof 3 GPIO_INPUT>; - label = "USB_C0_DP_HPD"; - }; - usb_c1_dp_hpd { - gpios = <&gpio7 0 GPIO_INPUT>; - label = "USB_C1_DP_HPD"; - }; - en_pp5000_fan { - gpios = <&gpio6 1 GPIO_OUT_LOW>; - label = "EN_PP5000_FAN"; - }; - ec_kso_02_inv { - gpios = <&gpio1 7 GPIO_OUT_LOW>; - enum-name = "GPIO_KBD_KSO2"; - label = "EC_KSO_02_INV"; - }; - }; - - def-lvol-io-list { - compatible = "nuvoton,npcx-lvolctrl-def"; - - /* I2C_SDA0 & SCL0 */ - lvol-io-pads = <&lvol_iob4 &lvol_iob5>; - }; -}; diff --git a/zephyr/projects/volteer/delbin/include/gpio_map.h b/zephyr/projects/volteer/delbin/include/gpio_map.h deleted file mode 100644 index 1f4b4e1ee0..0000000000 --- a/zephyr/projects/volteer/delbin/include/gpio_map.h +++ /dev/null @@ -1,70 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef __ZEPHYR_GPIO_MAP_H -#define __ZEPHYR_GPIO_MAP_H - -#include <devicetree.h> -#include <gpio_signal.h> - -#define GPIO_PCH_DSW_PWROK GPIO_UNIMPLEMENTED -#define GPIO_USB_C1_LS_EN GPIO_UNIMPLEMENTED - -#ifdef CONFIG_PLATFORM_EC_POWERSEQ -#define POWER_SIGNAL_INT(gpio, edge) \ - GPIO_INT(gpio, edge, power_signal_interrupt) -#define AP_PROCHOT_INT(gpio, edge) \ - GPIO_INT(gpio, edge, throttle_ap_prochot_input_interrupt) -#else -#define POWER_SIGNAL_INT(gpio, edge) -#define AP_PROCHOT_INT(gpio, edge) -#endif - -#ifdef CONFIG_PLATFORM_EC_ACCELGYRO_BMI260 -#define BMI260_INT(gpio, edge) GPIO_INT(gpio, edge, bmi260_interrupt) -#else -#define BMI260_INT(gpio, edge) -#endif - -#ifdef CONFIG_PLATFORM_EC_GMR_TABLET_MODE -#define GMR_TABLET_MODE_INT(gpio, edge) GPIO_INT(gpio, edge, \ - gmr_tablet_switch_isr) -#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L -#else -#define GMR_TABLET_MODE_INT(gpio, edge) -#endif - -/* - * Set EC_CROS_GPIO_INTERRUPTS to a space-separated list of GPIO_INT items. - * - * Each GPIO_INT requires three parameters: - * gpio_signal - The enum gpio_signal for the interrupt gpio - * interrupt_flags - The interrupt-related flags (e.g. GPIO_INT_EDGE_BOTH) - * handler - The platform/ec interrupt handler. - * - * Ensure that this files includes all necessary headers to declare all - * referenced handler functions. - * - * For example, one could use the follow definition: - * #define EC_CROS_GPIO_INTERRUPTS \ - * GPIO_INT(NAMED_GPIO(h1_ec_pwr_btn_odl), GPIO_INT_EDGE_BOTH, button_print) - */ -#define EC_CROS_GPIO_INTERRUPTS \ - BMI260_INT(GPIO_EC_IMU_INT_L, GPIO_INT_EDGE_FALLING) \ - GMR_TABLET_MODE_INT(GPIO_TABLET_MODE_L, GPIO_INT_EDGE_BOTH) \ - GPIO_INT(GPIO_AC_PRESENT, GPIO_INT_EDGE_BOTH, extpower_interrupt) \ - GPIO_INT(GPIO_LID_OPEN, GPIO_INT_EDGE_BOTH, lid_interrupt) \ - GPIO_INT(GPIO_POWER_BUTTON_L, GPIO_INT_EDGE_BOTH, \ - power_button_interrupt) \ - GPIO_INT(GPIO_WP_L, GPIO_INT_EDGE_BOTH, switch_interrupt) \ - POWER_SIGNAL_INT(GPIO_PCH_SLP_S0_L, GPIO_INT_EDGE_BOTH) \ - POWER_SIGNAL_INT(GPIO_PCH_SLP_S3_L, GPIO_INT_EDGE_BOTH) \ - POWER_SIGNAL_INT(GPIO_PG_EC_DSW_PWROK, GPIO_INT_EDGE_BOTH) \ - POWER_SIGNAL_INT(GPIO_PG_EC_RSMRST_ODL, GPIO_INT_EDGE_BOTH) \ - POWER_SIGNAL_INT(GPIO_PG_EC_ALL_SYS_PWRGD, GPIO_INT_EDGE_BOTH) \ - POWER_SIGNAL_INT(GPIO_SLP_SUS_L, GPIO_INT_EDGE_BOTH) \ - AP_PROCHOT_INT(GPIO_EC_PROCHOT_IN_L, GPIO_INT_EDGE_BOTH) - -#endif /* __ZEPHYR_GPIO_MAP_H */ diff --git a/zephyr/projects/volteer/delbin/motionsense.dts b/zephyr/projects/volteer/delbin/motionsense.dts deleted file mode 100644 index badc21a5e7..0000000000 --- a/zephyr/projects/volteer/delbin/motionsense.dts +++ /dev/null @@ -1,162 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <dt-bindings/motionsense/utils.h> - - -/ { - aliases { - /* - * motion sense's <>_INT_EVENT is handled - * by alias. Using the alias, each driver creates - * its own <>_INT_EVENT. - */ - bmi260-int = &base_accel; - }; - - /* - * Declare mutexes used by sensor drivers. - * A mutex node is used to create an instance of mutex_t. - * A mutex node is referenced by a sensor node if the - * corresponding sensor driver needs to use the - * instance of the mutex. - */ - motionsense-mutex { - compatible = "cros-ec,motionsense-mutex"; - mutex_bma255: bma255-mutex { - label = "BMA255_MUTEX"; - }; - - mutex_bmi260: bmi260-mutex { - label = "BMI260_MUTEX"; - }; - }; - - /* Rotation matrix used by drivers. */ - motionsense-rotation-ref { - compatible = "cros-ec,motionsense-rotation-ref"; - lid_rot_ref: lid-rotation-ref { - mat33 = <(-1) 0 0 - 0 (-1) 0 - 0 0 1>; - }; - base_rot_ref: base-rotation-ref { - mat33 = <1 0 0 - 0 1 0 - 0 0 1>; - }; - }; - - /* - * Driver specific data. A driver-specific data can be shared with - * different motion sensors while they are using the same driver. - * - * If a node's compatible starts with "cros-ec,accelgyro-", it is for - * a common structure defined in accelgyro.h. - * e.g) compatible = "cros-ec,accelgyro-als-drv-data" is for - * "struct als_drv_data_t" in accelgyro.h - */ - motionsense-sensor-data { - bma255_data: bma255-drv-data { - compatible = "cros-ec,drvdata-bma255"; - status = "okay"; - }; - - bmi260_data: bmi260-drv-data { - compatible = "cros-ec,drvdata-bmi260"; - status = "okay"; - }; - }; - - /* - * List of motion sensors that creates motion_sensors array. - * The label "lid_accel" and "base_accel" are used to indicate - * motion sensor IDs for lid angle calculation. - */ - motionsense-sensor { - lid_accel: lid-accel { - compatible = "cros-ec,bma255"; - status = "okay"; - - label = "Lid Accel"; - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_LID"; - mutex = <&mutex_bma255>; - port = <&i2c_sensor>; - rot-standard-ref = <&lid_rot_ref>; - default-range = <2>; - drv-data = <&bma255_data>; - i2c-spi-addr-flags = "BMA2x2_I2C_ADDR1_FLAGS"; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - label = "SENSOR_CONFIG_EC_S0"; - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - label = "SENSOR_CONFIG_EC_S3"; - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_accel: base-accel { - compatible = "cros-ec,bmi260-accel"; - status = "okay"; - - label = "Base Accel"; - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&mutex_bmi260>; - port = <&i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - default-range = <4>; - drv-data = <&bmi260_data>; - i2c-spi-addr-flags = "BMI260_ADDR0_FLAGS"; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - label = "SENSOR_CONFIG_EC_S0"; - odr = <(10000 | ROUND_UP_FLAG)>; - ec-rate = <(100 * USEC_PER_MSEC)>; - }; - ec-s3 { - label = "SENSOR_CONFIG_EC_S3"; - odr = <(10000 | ROUND_UP_FLAG)>; - ec-rate = <(100 * USEC_PER_MSEC)>; - }; - }; - }; - - base-gyro { - compatible = "cros-ec,bmi260-gyro"; - status = "okay"; - - label = "Base Gyro"; - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&mutex_bmi260>; - port = <&i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - default-range = <1000>; /* dps */ - drv-data = <&bmi260_data>; - i2c-spi-addr-flags = "BMI260_ADDR0_FLAGS"; - }; - }; - - motionsense-sensor-info { - compatible = "cros-ec,motionsense-sensor-info"; - - /* - * list of GPIO interrupts that have to - * be enabled at initial stage - */ - sensor-irqs = <&gpio_ec_imu_int_l>; - /* list of sensors in force mode */ - accel-force-mode-sensors = <&lid_accel>; - }; -}; diff --git a/zephyr/projects/volteer/delbin/prj.conf b/zephyr/projects/volteer/delbin/prj.conf deleted file mode 100644 index 1ef881f686..0000000000 --- a/zephyr/projects/volteer/delbin/prj.conf +++ /dev/null @@ -1,51 +0,0 @@ -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_CROS_EC=y -CONFIG_PLATFORM_EC=y -CONFIG_SHIMMED_TASKS=y -CONFIG_I2C=y -CONFIG_PLATFORM_EC_BRINGUP=y - -CONFIG_ARM_MPU=y - -CONFIG_PLATFORM_EC_VBOOT_EFS2=n - -CONFIG_ESPI=y -CONFIG_PLATFORM_EC_ESPI_VW_SLP_S4=y - -CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y -CONFIG_PLATFORM_EC_LID_SWITCH=y -CONFIG_PLATFORM_EC_POWER_BUTTON=y - -# Power sequencing -CONFIG_AP=y -CONFIG_AP_X86_INTEL_TGL=y -CONFIG_PLATFORM_EC_POWERSEQ=y -CONFIG_PLATFORM_EC_POWERSEQ_RTC_RESET=y -CONFIG_PLATFORM_EC_THROTTLE_AP=y - -# TODO(b/180410072): bringup these features -CONFIG_PLATFORM_EC_BOARD_VERSION_CBI=n -CONFIG_PLATFORM_EC_BOARD_VERSION_GPIO=n -CONFIG_PLATFORM_EC_VBOOT_HASH=n -CONFIG_PLATFORM_EC_VSTORE=n - -# Sensors -CONFIG_PLATFORM_EC_MOTIONSENSE=y -CONFIG_PLATFORM_EC_ACCEL_FIFO=y -CONFIG_PLATFORM_EC_ACCEL_INTERRUPTS=y -CONFIG_PLATFORM_EC_DYNAMIC_MOTION_SENSOR_COUNT=y -CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y -CONFIG_PLATFORM_EC_LID_ANGLE=y -CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y -CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y -CONFIG_PLATFORM_EC_TABLET_MODE=y - -# Sensor Drivers -CONFIG_PLATFORM_EC_ACCEL_BMA255=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI260=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y - -CONFIG_SYSCON=y diff --git a/zephyr/projects/volteer/delbin/zmake.yaml b/zephyr/projects/volteer/delbin/zmake.yaml deleted file mode 100644 index dc5217e042..0000000000 --- a/zephyr/projects/volteer/delbin/zmake.yaml +++ /dev/null @@ -1,14 +0,0 @@ -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -board: volteer -dts-overlays: - - gpio.dts - - motionsense.dts -supported-toolchains: - - coreboot-sdk - - zephyr -supported-zephyr-versions: - - v2.6 -output-type: npcx diff --git a/zephyr/projects/volteer/volteer/CMakeLists.txt b/zephyr/projects/volteer/volteer/CMakeLists.txt deleted file mode 100644 index 8c01874b1b..0000000000 --- a/zephyr/projects/volteer/volteer/CMakeLists.txt +++ /dev/null @@ -1,45 +0,0 @@ -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. -# SPDX-License-Identifier: Apache-2.0 - -cmake_minimum_required(VERSION 3.13.1) - -find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE}) -project(volteer) - -set(PLATFORM_EC_BOARD "${PLATFORM_EC}/board/volteer" CACHE PATH - "Path to the platform/ec board directory") -set(PLATFORM_EC_BASEBOARD "${PLATFORM_EC}/baseboard/volteer" CACHE PATH - "Path to the platform/ec baseboard directory") - -# Include board specific header files -zephyr_library_include_directories( - include - "${PLATFORM_EC_BASEBOARD}" - "${PLATFORM_EC_BOARD}") - -# Include selected EC source for the baseboard -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_BATTERY - "${PLATFORM_EC_BASEBOARD}/battery_presence.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_CHARGE_MANAGER - "${PLATFORM_EC_BASEBOARD}/charger.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_CBI_EEPROM - "${PLATFORM_EC_BASEBOARD}/cbi.c" - "${PLATFORM_EC_BASEBOARD}/cbi_ec_fw_config.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_POWERSEQ - "${PLATFORM_EC_BASEBOARD}/power.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USB_POWER_DELIVERY - "${PLATFORM_EC_BASEBOARD}/usb_pd_policy.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USBC - "${PLATFORM_EC_BASEBOARD}/usbc_config.c") - -# Include selected EC source for the board -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_BATTERY - "${PLATFORM_EC_BOARD}/battery.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_CBI_EEPROM - "${PLATFORM_EC_BOARD}/cbi.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_LED_COMMON - "${PLATFORM_EC_BOARD}/led.c") -zephyr_library_sources_ifdef(CONFIG_PLATFORM_EC_USBC - "${PLATFORM_EC_BOARD}/usbc_config.c") diff --git a/zephyr/projects/volteer/volteer/bb_retimer.dts b/zephyr/projects/volteer/volteer/bb_retimer.dts deleted file mode 100644 index 226356d030..0000000000 --- a/zephyr/projects/volteer/volteer/bb_retimer.dts +++ /dev/null @@ -1,18 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -&i2c3_0 { - status = "okay"; - clock-frequency = <I2C_BITRATE_STANDARD>; - - usb_c1_bb_retimer: jhl8040r@40 { - compatible = "intel,jhl8040r"; - reg = <0x40>; - label = "USB_C1_BB_RETIMER"; - int-gpios = <&gpio_usb_c1_mix_int_odl>; - reset-gpios = <&gpio_usb_c1_rt_rst_odl>; - ls-en-gpios = <&gpio_unused_gpio41>; - }; -}; diff --git a/zephyr/projects/volteer/volteer/cbi_eeprom.dts b/zephyr/projects/volteer/volteer/cbi_eeprom.dts deleted file mode 100644 index 65248a5f48..0000000000 --- a/zephyr/projects/volteer/volteer/cbi_eeprom.dts +++ /dev/null @@ -1,68 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -&i2c7_0 { - cbi_eeprom: eeprom@50 { - compatible = "atmel,at24"; - reg = <0x50>; - label = "EEPROM_CBI"; - size = <2048>; - pagesize = <16>; - address-width = <8>; - timeout = <5>; - wp-gpios = <&gpio_ec_wp_l>; - }; -}; - -&cbi_ssfc_base_sensor { - base_sensor_bmi160: bmi160 { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - - value = <1>; - }; - base_sensor_icm426xx: icm426xx { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - - value = <2>; - }; - base_sensor_kx022: kx022 { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - - value = <3>; - }; -}; - -&cbi_ssfc_lid_sensor { - lid_sensor_bma255: bma255 { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - - value = <1>; - }; - lid_sensor_kx022: kx022 { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - - value = <2>; - }; -}; - -&cbi_ssfc_lightbar { - lightbar_10_led: 10_led { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - - value = <1>; - }; - lightbar_12_led: 12_led { - compatible = "named-cbi-ssfc-value"; - status = "okay"; - - value = <2>; - }; -}; diff --git a/zephyr/projects/volteer/volteer/fan.dts b/zephyr/projects/volteer/volteer/fan.dts deleted file mode 100644 index e8fcc7194c..0000000000 --- a/zephyr/projects/volteer/volteer/fan.dts +++ /dev/null @@ -1,29 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - named-fans { - compatible = "named-fans"; - - fan_0 { - label = "FAN_0"; - pwm = <&pwm_fan>; - rpm_min = <1900>; - rpm_start = <1900>; - rpm_max = <5900>; - tach = <&tach1>; - enable_gpio = <&gpio_en_pp5000_fan>; - }; - }; -}; - -/* Tachemeter for fan speed measurement */ -&tach1 { - status = "okay"; - pinctrl-0 = <&alt3_ta1_sl1>; /* Use TA1 as input pin */ - port = <NPCX_TACH_PORT_A>; /* port-A is selected */ - sample-clk = <NPCX_TACH_FREQ_LFCLK>; /* Use LFCLK as sampling clock */ - pulses-per-round = <2>; /* number of pulses per round of encoder */ -}; diff --git a/zephyr/projects/volteer/volteer/gpio.dts b/zephyr/projects/volteer/volteer/gpio.dts deleted file mode 100644 index 4466689481..0000000000 --- a/zephyr/projects/volteer/volteer/gpio.dts +++ /dev/null @@ -1,406 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - named-gpios { - compatible = "named-gpios"; - - ec_lid_open { - gpios = <&gpiod 2 GPIO_INPUT>; - enum-name = "GPIO_LID_OPEN"; - label = "EC_LID_OPEN"; - }; - gpio_ec_wp_l: ec_wp_l { - #gpio-cells = <0>; - gpios = <&gpioa 1 GPIO_INPUT>; - enum-name = "GPIO_EC_WP_L"; - label = "EC_WP_L"; - }; - wp_l { - gpios = <&gpioa 1 GPIO_INPUT>; - enum-name = "GPIO_WP_L"; - label = "WP_L"; - }; - h1_ec_pwr_btn_odl { - gpios = <&gpio0 1 GPIO_INPUT>; - enum-name = "GPIO_POWER_BUTTON_L"; - label = "H1_EC_PWR_BTN_ODL"; - }; - acok_od { - gpios = <&gpio0 0 GPIO_INPUT>; - enum-name = "GPIO_AC_PRESENT"; - label = "ACOK_OD"; - }; - slp_s0_l { - gpios = <&gpiod 5 GPIO_INPUT>; - enum-name = "GPIO_PCH_SLP_S0_L"; - label = "SLP_S0_L"; - }; - slp_s3_l { - gpios = <&gpioa 5 GPIO_INPUT>; - enum-name = "GPIO_PCH_SLP_S3_L"; - label = "SLP_S3_L"; - }; - pch_slp_sus_l { - gpios = <&gpiod 7 GPIO_INPUT>; - enum-name = "GPIO_PCH_SLP_SUS_L"; - label = "PCH_SLP_SUS_L"; - }; - slp_sus_l { - gpios = <&gpiod 7 GPIO_INPUT>; - enum-name = "GPIO_SLP_SUS_L"; - label = "SLP_SUS_L"; - }; - pg_ec_rsmrst_odl { - gpios = <&gpioe 2 GPIO_INPUT>; - enum-name = "GPIO_PG_EC_RSMRST_ODL"; - label = "PG_EC_RSMRST_ODL"; - }; - rsmrst_l_pgood { - gpios = <&gpioe 2 GPIO_INPUT>; - enum-name = "GPIO_RSMRST_L_PGOOD"; - label = "RSMRST_L_PGOOD"; - }; - pg_ec_dsw_pwrok { - gpios = <&gpioc 7 GPIO_INPUT>; - enum-name = "GPIO_PG_EC_DSW_PWROK"; - label = "PG_EC_DSW_PWROK"; - }; - pg_ec_all_sys_pwrgd { - gpios = <&gpiof 4 GPIO_INPUT>; - enum-name = "GPIO_PG_EC_ALL_SYS_PWRGD"; - label = "PG_EC_ALL_SYS_PWRGD"; - }; - gpio_ec_imu_int_l: ec_imu_int_l { - gpios = <&gpio5 6 GPIO_INPUT>; - enum-name = "GPIO_EC_IMU_INT_L"; - label = "EC_IMU_INT_L"; - }; - gpio_ec_als_rgb_int_l: ec_als_rgb_int_l { - gpios = <&gpiod 4 GPIO_INPUT>; - enum-name = "GPIO_EC_ALS_RGB_INT_L"; - label = "EC_ALS_RGB_INT_L"; - }; - tablet_mode_l { - gpios = <&gpio9 5 GPIO_INPUT>; - enum-name = "GPIO_TABLET_MODE_L"; - label = "TABLET_MODE_L"; - }; - ec_accel_int { - gpios = <&gpio8 1 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_EC_ACCEL_INT"; - label = "EC_ACCEL_INT"; - }; - usb_c0_tcpc_int_odl { - gpios = <&gpioe 0 GPIO_INPUT>; - enum-name = "GPIO_USB_C0_TCPC_INT_ODL"; - label = "USB_C0_TCPC_INT_ODL"; - }; - usb_c1_tcpc_int_odl { - gpios = <&gpioa 2 GPIO_INPUT>; - enum-name = "GPIO_USB_C1_TCPC_INT_ODL"; - label = "USB_C1_TCPC_INT_ODL"; - }; - usb_c0_ppc_int_odl { - gpios = <&gpio6 2 GPIO_INPUT>; - enum-name = "GPIO_USB_C0_PPC_INT_ODL"; - label = "USB_C0_PPC_INT_ODL"; - }; - usb_c1_ppc_int_odl { - gpios = <&gpiof 5 GPIO_INPUT>; - enum-name = "GPIO_USB_C1_PPC_INT_ODL"; - label = "USB_C1_PPC_INT_ODL"; - }; - usb_c0_bc12_int_odl { - gpios = <&gpioe 4 GPIO_INPUT>; - enum-name = "GPIO_USB_C0_BC12_INT_ODL"; - label = "USB_C0_BC12_INT_ODL"; - }; - gpio_usb_c1_mix_int_odl: usb_c1_mix_int_odl { - #gpio-cells = <0>; - gpios = <&gpio0 3 GPIO_INPUT>; - enum-name = "GPIO_USB_C1_MIX_INT_ODL"; - label = "USB_C1_MIX_INT_ODL"; - }; - usb_c1_bc12_int_odl { - #gpio-cells = <0>; - gpios = <&gpio0 3 GPIO_INPUT>; - enum-name = "GPIO_USB_C1_BC12_INT_ODL"; - label = "USB_C1_BC12_INT_ODL"; - }; - usb_c1_frs_en { - gpios = <&gpio9 4 GPIO_OUT_LOW>; - enum-name = "GPIO_USB_C1_FRS_EN"; - label = "USB_C1_FRS_EN"; - }; - ec_voldn_btn_odl { - gpios = <&gpio9 3 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_VOLUME_DOWN_L"; - label = "EC_VOLDN_BTN_ODL"; - }; - ec_volup_btn_odl { - gpios = <&gpio9 7 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_VOLUME_UP_L"; - label = "EC_VOLUP_BTN_ODL"; - }; - en_pp3300_a { - gpios = <&gpioa 3 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_PP3300_A"; - label = "EN_PP3300_A"; - }; - en_pp5000 { - gpios = <&gpioa 4 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_PP5000"; - label = "EN_PP5000"; - }; - en_pp5000_a { - gpios = <&gpioa 4 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_PP5000_A"; - label = "EN_PP5000_A"; - }; - en_ppvar_vccin { - gpios = <&gpio4 3 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_PPVAR_VCCIN"; - label = "EN_PPVAR_VCCIN"; - }; - ec_pch_dsw_pwrok { - gpios = <&gpioc 0 GPIO_OUT_LOW>; - enum-name = "GPIO_PCH_DSW_PWROK"; - label = "EC_PCH_DSW_PWROK"; - }; - ec_rst_odl { - gpios = <&gpio0 2 GPIO_INPUT>; - label = "EC_RST_ODL"; - }; - ec_pch_sys_pwrok { - gpios = <&gpio3 7 GPIO_OUT_LOW>; - enum-name = "GPIO_EC_PCH_SYS_PWROK"; - label = "EC_PCH_SYS_PWROK"; - }; - ec_pch_rsmrst_odl { - gpios = <&gpioa 6 GPIO_ODR_LOW>; - enum-name = "GPIO_PCH_RSMRST_L"; - label = "EC_PCH_RSMRST_ODL"; - }; - ec_pch_pwr_btn_odl { - gpios = <&gpioc 1 GPIO_ODR_HIGH>; - enum-name = "GPIO_PCH_PWRBTN_L"; - label = "EC_PCH_PWR_BTN_ODL"; - }; - ec_pch_rtcrst { - gpios = <&gpio7 6 GPIO_OUT_LOW>; - enum-name = "GPIO_PCH_RTCRST"; - label = "EC_PCH_RTCRST"; - }; - ec_pch_wake_odl { - gpios = <&gpio7 4 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_PCH_WAKE_ODL"; - label = "EC_PCH_WAKE_ODL"; - }; - ec_entering_rw { - gpios = <&gpioe 3 GPIO_OUT_LOW>; - enum-name = "GPIO_ENTERING_RW"; - label = "EC_ENTERING_RW"; - }; - ec_prochot_odl { - gpios = <&gpio6 3 GPIO_ODR_HIGH>; - enum-name = "GPIO_CPU_PROCHOT"; - label = "EC_PROCHOT_ODL"; - }; - ec_prochot_in_l { - gpios = <&gpiof 0 GPIO_INPUT>; - enum-name = "GPIO_EC_PROCHOT_IN_L"; - label = "EC_PROCHOT_IN_L"; - }; - sys_rst_odl { - gpios = <&gpioc 5 GPIO_ODR_HIGH>; - enum-name = "GPIO_SYS_RESET_L"; - label = "SYS_RST_ODL"; - }; - ec_pch_int_odl { - gpios = <&gpiob 0 GPIO_ODR_HIGH>; - enum-name = "GPIO_EC_INT_L"; - label = "EC_PCH_INT_ODL"; - }; - en_pp5000_usba { - gpios = <&gpioc 6 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_PP5000_USBA"; - label = "EN_PP5000_USBA"; - }; - usb_a_low_pwr_od { - gpios = <&gpio6 6 GPIO_ODR_LOW>; - enum-name = "GPIO_USB_A_LOW_PWR_OD"; - label = "USB_A_LOW_PWR_OD"; - }; - gpio_usb_c1_rt_rst_odl_boardid_0: usb_c1_rt_rst_odl_boardid_0 { - #gpio-cells = <0>; - gpios = <&gpio3 2 GPIO_ODR_LOW>; - label = "USB_C1_RT_RST_ODL_BOARDID_0"; - }; - gpio_usb_c1_rt_rst_odl: usb_c1_rt_rst_odl { - #gpio-cells = <0>; - gpios = <&gpio8 3 GPIO_ODR_LOW>; - enum-name = "GPIO_USB_C1_RT_RST_ODL"; - label = "USB_C1_RT_RST_ODL"; - }; - usb_c0_oc_odl { - gpios = <&gpiob 1 GPIO_ODR_HIGH>; - enum-name = "GPIO_USB_C0_OC_ODL"; - label = "USB_C0_OC_ODL"; - }; - usb_c1_oc_odl { - gpios = <&gpio5 0 GPIO_ODR_HIGH>; - enum-name = "GPIO_USB_C1_OC_ODL"; - label = "USB_C1_OC_ODL"; - }; - usb_c1_rt_int_odl { - gpios = <&gpiof 3 GPIO_INPUT>; - label = "USB_C1_RT_INT_ODL"; - }; - ec_h1_packet_mode { - gpios = <&gpio7 5 GPIO_OUT_LOW>; - enum-name = "GPIO_PACKET_MODE_EN"; - label = "EC_H1_PACKET_MODE"; - }; - m2_ssd_pln { - gpios = <&gpioa 0 GPIO_ODR_HIGH>; - enum-name = "GPIO_M2_SSD_PLN"; - label = "M2_SSD_PLN"; - }; - m2_ssd_pla { - gpios = <&gpio7 0 GPIO_INPUT>; - label = "M2_SSD_PLA"; - }; - ccd_mode_odl { - gpios = <&gpioe 5 GPIO_INPUT>; - label = "CCD_MODE_ODL"; - }; - ec_slp_s0ix { - gpios = <&gpio7 2 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "EC_SLP_S0IX"; - }; - gpio_unused_gpio41: unused_gpio41 { - #gpio-cells = <0>; - gpios = <&gpio4 1 (GPIO_INPUT | GPIO_PULL_UP)>; - enum-name = "GPIO_USB_C1_LS_EN"; - label = "UNUSED_GPIO41"; - }; - ec_kb_bl_en { - gpios = <&gpio8 6 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "EC_KB_BL_EN"; - }; - ec_espi_alert_l { - gpios = <&gpio5 7 (GPIO_INPUT | GPIO_PULL_UP)>; - label = "EC_ESPI_ALERT_L"; - }; - ec_edp_bl_en { - gpios = <&gpiod 3 GPIO_OUT_HIGH>; - enum-name = "GPIO_ENABLE_BACKLIGHT"; - label = "EC_EDP_BL_EN"; - }; - ec_i2c0_sensor_scl { - gpios = <&gpiob 5 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C0_SENSOR_SCL"; - label = "EC_I2C0_SENSOR_SCL"; - }; - ec_i2c0_sensor_sda { - gpios = <&gpiob 4 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C0_SENSOR_SDA"; - label = "EC_I2C0_SENSOR_SDA"; - }; - ec_i2c1_usb_c0_scl { - gpios = <&gpio9 0 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C1_USB_C0_SCL"; - label = "EC_I2C1_USB_C0_SCL"; - }; - ec_i2c1_usb_c0_sda { - gpios = <&gpio8 7 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C1_USB_C0_SDA"; - label = "EC_I2C1_USB_C0_SDA"; - }; - ec_i2c2_usb_c1_scl { - gpios = <&gpio9 2 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C2_USB_C1_SCL"; - label = "EC_I2C2_USB_C1_SCL"; - }; - ec_i2c2_usb_c1_sda { - gpios = <&gpio9 1 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C2_USB_C1_SDA"; - label = "EC_I2C2_USB_C1_SDA"; - }; - ec_i2c3_usb_1_mix_scl { - gpios = <&gpiod 1 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C3_USB_1_MIX_SCL"; - label = "EC_I2C3_USB_1_MIX_SCL"; - }; - ec_i2c3_usb_1_mix_sda { - gpios = <&gpiod 0 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C3_USB_1_MIX_SDA"; - label = "EC_I2C3_USB_1_MIX_SDA"; - }; - ec_i2c5_battery_scl { - gpios = <&gpio3 3 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C5_BATTERY_SCL"; - label = "EC_I2C5_BATTERY_SCL"; - }; - ec_i2c5_battery_sda { - gpios = <&gpio3 6 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C5_BATTERY_SDA"; - label = "EC_I2C5_BATTERY_SDA"; - }; - ec_i2c7_eeprom_pwr_scl_r { - gpios = <&gpiob 3 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C7_EEPROM_PWR_SCL_R"; - label = "EC_I2C7_EEPROM_PWR_SCL_R"; - }; - ec_i2c7_eeprom_pwr_sda_r { - gpios = <&gpiob 2 GPIO_INPUT>; - enum-name = "GPIO_EC_I2C7_EEPROM_PWR_SDA_R"; - label = "EC_I2C7_EEPROM_PWR_SDA_R"; - }; - /* - * TODO(b:190743662) Cleanup to possibly remove the enum - */ - ec_batt_pres_odl { - gpios = <&gpioe 1 GPIO_INPUT>; - enum-name = "GPIO_BATT_PRES_ODL"; - label = "EC_BATT_PRES_ODL"; - }; - gpio_en_pp5000_fan: en_pp5000_fan { - gpios = <&gpio6 1 GPIO_OUT_LOW>; - enum-name = "GPIO_EN_PP5000_FAN"; - label = "EN_PP5000_FAN"; - }; - ec_kso_02_inv { - gpios = <&gpio1 7 GPIO_OUT_LOW>; - enum-name = "GPIO_KBD_KSO2"; - label = "EC_KSO_02_INV"; - }; - }; - - def-lvol-io-list { - compatible = "nuvoton,npcx-lvolctrl-def"; - lvol-io-pads = <&lvol_iob4 &lvol_iob5>; /* I2C_SDA0 & SCL0 */ - }; - - unused-pins { - compatible = "unused-gpios"; - unused-gpios = - <&gpio3 4 0>, - <&gpio4 1 0>, - <&gpio5 7 0>, /* EC_ESPI_ALERT_L not stuffed */ - <&gpio9 6 0>, - <&gpio7 2 0>, /* EC_SLP_S0IX not stuffed */ - <&gpio8 6 0>, /* EC_KB_BL_EN not stuffed */ - <&gpioa 7 0>, /* EN_PP5000_USB_AG not stuffed */ - <&gpiof 2 0>, - /* - * GPIOB6 cannot be configured as an input. - * Drive output low so signal level doesn't - * depend on default setting of PxDOUT register. - */ - <&gpiob 6 GPIO_OUTPUT_LOW>; - }; -}; diff --git a/zephyr/projects/volteer/volteer/include/gpio_map.h b/zephyr/projects/volteer/volteer/include/gpio_map.h deleted file mode 100644 index 2d6f5f87ee..0000000000 --- a/zephyr/projects/volteer/volteer/include/gpio_map.h +++ /dev/null @@ -1,112 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef __ZEPHYR_GPIO_MAP_H -#define __ZEPHYR_GPIO_MAP_H - -#include <devicetree.h> -#include <gpio_signal.h> - -#include "extpower.h" -#include "lid_switch.h" -#include "power_button.h" - -/* - * Without https://github.com/zephyrproject-rtos/zephyr/pull/29282, we need - * to manually link GPIO_ defines that platform/ec code expects to the - * enum gpio_signal values that are generated by device tree bindings. - * - * Note we only need to create aliases for GPIOs that are referenced in common - * platform/ec code. - */ -#define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_PG_EC_DSW_PWROK - -/* Helper macros for generating CROS_EC_GPIO_INTERRUPTS */ -#ifdef CONFIG_PLATFORM_EC_POWERSEQ -#define POWER_SIGNAL_INT(gpio, edge) \ - GPIO_INT(gpio, edge, power_signal_interrupt) -#define AP_PROCHOT_INT(gpio, edge) \ - GPIO_INT(gpio, edge, throttle_ap_prochot_input_interrupt) -#define POWER_BUTTON_INT(gpio, edge) \ - GPIO_INT(gpio, edge, power_button_interrupt) -#else -#define POWER_SIGNAL_INT(gpio, edge) -#define AP_PROCHOT_INT(gpio, edge) -#define POWER_BUTTON_INT(gpio, edge) -#endif - -#ifdef CONFIG_PLATFORM_EC_USBC -#define TCPC_ALERT_INT(gpio, edge) GPIO_INT(gpio, edge, tcpc_alert_event) -#define PPC_INT(gpio, edge) GPIO_INT(gpio, edge, ppc_interrupt) -#define BC12_INT(gpio, edge) GPIO_INT(gpio, edge, bc12_interrupt) -#else -#define TCPC_ALERT_INT(gpio, edge) -#define PPC_INT(gpio, edge) -#define BC12_INT(gpio, edge) -#endif - -#ifdef CONFIG_PLATFORM_EC_ALS_TCS3400 -#define TCS3400_INT(gpio, edge) GPIO_INT(gpio, edge, tcs3400_interrupt) -#else -#define TCS3400_INT(gpio, edge) -#endif - -#ifdef CONFIG_PLATFORM_EC_ACCELGYRO_BMI260 -#define BMI260_INT(gpio, edge) GPIO_INT(gpio, edge, bmi260_interrupt) -#else -#define BMI260_INT(gpio, edge) -#endif - -#ifdef CONFIG_PLATFORM_EC_GMR_TABLET_MODE -#define GMR_TABLET_MODE_INT(gpio, edge) GPIO_INT(gpio, edge, \ - gmr_tablet_switch_isr) -#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L -#else -#define GMR_TABLET_MODE_INT(gpio, edge) -#endif - -#define GPIO_EC_BATT_PRES_ODL GPIO_BATT_PRES_ODL - -/* - * Set EC_CROS_GPIO_INTERRUPTS to a space-separated list of GPIO_INT items. - * - * Each GPIO_INT requires three parameters: - * gpio_signal - The enum gpio_signal for the interrupt gpio - * interrupt_flags - The interrupt-related flags (e.g. GPIO_INT_EDGE_BOTH) - * handler - The platform/ec interrupt handler. - * - * Ensure that this files includes all necessary headers to declare all - * referenced handler functions. - * - * For example, one could use the follow definition: - * #define EC_CROS_GPIO_INTERRUPTS \ - * GPIO_INT(NAMED_GPIO(h1_ec_pwr_btn_odl), GPIO_INT_EDGE_BOTH, button_print) - */ -#define EC_CROS_GPIO_INTERRUPTS \ - BMI260_INT(GPIO_EC_IMU_INT_L, GPIO_INT_EDGE_FALLING) \ - GMR_TABLET_MODE_INT(GPIO_TABLET_MODE_L, GPIO_INT_EDGE_BOTH) \ - GPIO_INT(GPIO_AC_PRESENT, GPIO_INT_EDGE_BOTH, extpower_interrupt) \ - GPIO_INT(GPIO_LID_OPEN, GPIO_INT_EDGE_BOTH, lid_interrupt) \ - GPIO_INT(GPIO_EC_WP_L, GPIO_INT_EDGE_BOTH, switch_interrupt) \ - POWER_SIGNAL_INT(GPIO_PCH_SLP_S0_L, GPIO_INT_EDGE_BOTH) \ - POWER_SIGNAL_INT(GPIO_PCH_SLP_S3_L, GPIO_INT_EDGE_BOTH) \ - POWER_SIGNAL_INT(GPIO_PCH_SLP_SUS_L, GPIO_INT_EDGE_BOTH) \ - POWER_SIGNAL_INT(GPIO_PG_EC_DSW_PWROK, GPIO_INT_EDGE_BOTH) \ - POWER_SIGNAL_INT(GPIO_PG_EC_RSMRST_ODL, GPIO_INT_EDGE_BOTH) \ - POWER_SIGNAL_INT(GPIO_PCH_DSW_PWROK, GPIO_INT_EDGE_BOTH) \ - POWER_SIGNAL_INT(GPIO_PG_EC_ALL_SYS_PWRGD, GPIO_INT_EDGE_BOTH) \ - POWER_BUTTON_INT(GPIO_POWER_BUTTON_L, GPIO_INT_EDGE_BOTH) \ - TCPC_ALERT_INT(GPIO_USB_C0_TCPC_INT_ODL, GPIO_INT_EDGE_BOTH) \ - TCPC_ALERT_INT(GPIO_USB_C1_TCPC_INT_ODL, GPIO_INT_EDGE_BOTH) \ - TCS3400_INT(GPIO_EC_ALS_RGB_INT_L, GPIO_INT_EDGE_FALLING) \ - PPC_INT(GPIO_USB_C0_PPC_INT_ODL, GPIO_INT_EDGE_BOTH) \ - PPC_INT(GPIO_USB_C1_PPC_INT_ODL, GPIO_INT_EDGE_BOTH) \ - BC12_INT(GPIO_USB_C0_BC12_INT_ODL, GPIO_INT_EDGE_BOTH) \ - BC12_INT(GPIO_USB_C1_MIX_INT_ODL, GPIO_INT_EDGE_BOTH) \ - AP_PROCHOT_INT(GPIO_EC_PROCHOT_IN_L, GPIO_INT_EDGE_BOTH) \ - GPIO_INT(GPIO_VOLUME_DOWN_L, GPIO_INT_EDGE_BOTH, button_interrupt) \ - GPIO_INT(GPIO_VOLUME_UP_L, GPIO_INT_EDGE_BOTH, button_interrupt) - -#endif /* __ZEPHYR_GPIO_MAP_H */ diff --git a/zephyr/projects/volteer/volteer/include/pwm_map.h b/zephyr/projects/volteer/volteer/include/pwm_map.h deleted file mode 100644 index 67ab70936f..0000000000 --- a/zephyr/projects/volteer/volteer/include/pwm_map.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef __ZEPHYR_CHROME_PWM_MAP_H -#define __ZEPHYR_CHROME_PWM_MAP_H - -#include <devicetree.h> - -#include "config.h" - -#include "pwm/pwm.h" - -/* - * TODO(b/177452529): eliminate the dependency on enum pwm_channel - * and configure this information directly from the device tree. - */ -#define PWM_CH_LED4_SIDESEL NAMED_PWM(led3_sidesel) - -#define PWM_CH_KBLIGHT NAMED_PWM(kblight) - -#define PWM_CH_FAN NAMED_PWM(fan) - -#endif /* __ZEPHYR_CHROME_PWM_MAP_H */ diff --git a/zephyr/projects/volteer/volteer/keyboard.dts b/zephyr/projects/volteer/volteer/keyboard.dts deleted file mode 100644 index e9b5cdf0a1..0000000000 --- a/zephyr/projects/volteer/volteer/keyboard.dts +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - cros-keyscan { - compatible = "cros-keyscan"; - - actual-key-mask = < - 0x14 /* C0 */ - 0xff /* C1 */ - 0xff /* C2 */ - 0xff /* C3 */ - 0xff /* C4 */ - 0xf5 /* C5 */ - 0xff /* C6 */ - 0xa4 /* C7 */ - 0xff /* C8 */ - 0xfe /* C9 */ - 0x55 /* C10 */ - 0xfa /* C11 */ - 0xca /* C12 */ - 0 /* C13 - for keypad */ - 0 /* C14 - for keypad */ - >; - }; -}; diff --git a/zephyr/projects/volteer/volteer/motionsense.dts b/zephyr/projects/volteer/volteer/motionsense.dts deleted file mode 100644 index e22d5571dc..0000000000 --- a/zephyr/projects/volteer/volteer/motionsense.dts +++ /dev/null @@ -1,263 +0,0 @@ -/* - * Copyright (c) 2020 The Chromium OS Authors - * - * SPDX-License-Identifier: Apache-2.0 - */ - -#include <dt-bindings/motionsense/utils.h> - - -/ { - aliases { - /* - * motion sense's <>_INT_EVENT is handled - * by alias. Using the alias, each driver creates - * its own <>_INT_EVENT. - */ - bmi260-int = &base_accel; - tcs3400-int = &als_clear; - }; - - /* - * Declare mutexes used by sensor drivers. - * A mutex node is used to create an instance of mutex_t. - * A mutex node is referenced by a sensor node if the - * corresponding sensor driver needs to use the - * instance of the mutex. - */ - motionsense-mutex { - compatible = "cros-ec,motionsense-mutex"; - mutex_bma255: bma255-mutex { - label = "BMA255_MUTEX"; - }; - - mutex_bmi260: bmi260-mutex { - label = "BMI260_MUTEX"; - }; - }; - - /* Rotation matrix used by drivers. */ - motionsense-rotation-ref { - compatible = "cros-ec,motionsense-rotation-ref"; - lid_rot_ref: lid-rotation-ref { - mat33 = <1 0 0 - 0 (-1) 0 - 0 0 (-1)>; - }; - base_rot_ref: base-rotation-ref { - mat33 = <0 1 0 - (-1) 0 0 - 0 0 1>; - }; - }; - - /* - * Driver specific data. A driver-specific data can be shared with - * different motion sensors while they are using the same driver. - * - * If a node's compatible starts with "cros-ec,accelgyro-", it is for - * a common structure defined in accelgyro.h. - * e.g) compatible = "cros-ec,accelgyro-als-drv-data" is for - * "struct als_drv_data_t" in accelgyro.h - */ - motionsense-sensor-data { - bma255_data: bma255-drv-data { - compatible = "cros-ec,drvdata-bma255"; - status = "okay"; - }; - - bmi260_data: bmi260-drv-data { - compatible = "cros-ec,drvdata-bmi260"; - status = "okay"; - }; - - tcs_clear_data: tcs3400-clear-drv-data { - compatible = "cros-ec,drvdata-tcs3400-clear"; - status = "okay"; - - als-drv-data { - compatible = "cros-ec,accelgyro-als-drv-data"; - als-cal { - scale = <1>; - uscale = <0>; - offset = <0>; - als-channel-scale { - compatible = - "cros-ec,accelgyro-als-channel-scale"; - k-channel-scale = <1>; - cover-scale = <1>; - }; - }; - }; - }; - - tcs_rgb_data: tcs3400-rgb-drv-data { - compatible = "cros-ec,drvdata-tcs3400-rgb"; - status = "okay"; - - /* node for rgb_calibration_t defined in accelgyro.h */ - rgb_calibration { - compatible = - "cros-ec,accelgyro-rgb-calibration"; - - irt = <1>; - - rgb-cal-x { - offset = <0>; - coeff = <0 0 0 0>; - als-channel-scale { - compatible = - "cros-ec,accelgyro-als-channel-scale"; - k-channel-scale = <1>; - cover-scale = <1>; - }; - }; - rgb-cal-y { - offset = <0>; - coeff = <0 0 0 0>; - als-channel-scale { - compatible = - "cros-ec,accelgyro-als-channel-scale"; - k-channel-scale = <1>; - cover-scale = <1>; - }; - }; - rgb-cal-z { - offset = <0>; - coeff = <0 0 0 0>; - als-channel-scale { - compatible = - "cros-ec,accelgyro-als-channel-scale"; - k-channel-scale = <1>; - cover-scale = <1>; - }; - }; - }; - }; - }; - - /* - * List of motion sensors that creates motion_sensors array. - * The label "lid_accel" and "base_accel" are used to indicate - * motion sensor IDs for lid angle calculation. - */ - motionsense-sensor { - lid_accel: lid-accel { - compatible = "cros-ec,bma255"; - status = "okay"; - - label = "Lid Accel"; - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_LID"; - mutex = <&mutex_bma255>; - port = <&i2c_sensor>; - rot-standard-ref = <&lid_rot_ref>; - default-range = <2>; - drv-data = <&bma255_data>; - i2c-spi-addr-flags = "BMA2x2_I2C_ADDR1_FLAGS"; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - label = "SENSOR_CONFIG_EC_S0"; - odr = <(10000 | ROUND_UP_FLAG)>; - }; - ec-s3 { - label = "SENSOR_CONFIG_EC_S3"; - odr = <(10000 | ROUND_UP_FLAG)>; - }; - }; - }; - - base_accel: base-accel { - compatible = "cros-ec,bmi260-accel"; - status = "okay"; - - label = "Base Accel"; - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&mutex_bmi260>; - port = <&i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - default-range = <4>; - drv-data = <&bmi260_data>; - i2c-spi-addr-flags = "BMI260_ADDR0_FLAGS"; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - label = "SENSOR_CONFIG_EC_S0"; - odr = <(10000 | ROUND_UP_FLAG)>; - ec-rate = <(100 * USEC_PER_MSEC)>; - }; - ec-s3 { - label = "SENSOR_CONFIG_EC_S3"; - odr = <(10000 | ROUND_UP_FLAG)>; - ec-rate = <(100 * USEC_PER_MSEC)>; - }; - }; - }; - - base-gyro { - compatible = "cros-ec,bmi260-gyro"; - status = "okay"; - - label = "Base Gyro"; - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - mutex = <&mutex_bmi260>; - port = <&i2c_sensor>; - rot-standard-ref = <&base_rot_ref>; - default-range = <1000>; /* dps */ - drv-data = <&bmi260_data>; - i2c-spi-addr-flags = "BMI260_ADDR0_FLAGS"; - }; - - als_clear: base-als-clear { - compatible = "cros-ec,tcs3400-clear"; - status = "okay"; - - label = "Clear Light"; - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - port = <&i2c_sensor>; - default-range = <0x10000>; - drv-data = <&tcs_clear_data>; - i2c-spi-addr-flags = "TCS3400_I2C_ADDR_FLAGS"; - configs { - compatible = - "cros-ec,motionsense-sensor-config"; - ec-s0 { - /* Run ALS sensor in S0 */ - label = "SENSOR_CONFIG_EC_S0"; - odr = <1000>; - }; - }; - }; - - base-als-rgb { - compatible = "cros-ec,tcs3400-rgb"; - status = "okay"; - - label = "RGB Light"; - active-mask = "SENSOR_ACTIVE_S0_S3"; - location = "MOTIONSENSE_LOC_BASE"; - default-range = <0x10000>; /* scale = 1x, uscale = 0 */ - drv-data = <&tcs_rgb_data>; - }; - }; - - motionsense-sensor-info { - compatible = "cros-ec,motionsense-sensor-info"; - - /* list of entries for motion_als_sensors */ - als-sensors = <&als_clear>; - /* - * list of GPIO interrupts that have to - * be enabled at initial stage - */ - sensor-irqs = <&gpio_ec_imu_int_l &gpio_ec_als_rgb_int_l>; - /* list of sensors in force mode */ - accel-force-mode-sensors = <&lid_accel &als_clear>; - }; -}; diff --git a/zephyr/projects/volteer/volteer/prj.conf b/zephyr/projects/volteer/volteer/prj.conf deleted file mode 100644 index 80bdc2ad44..0000000000 --- a/zephyr/projects/volteer/volteer/prj.conf +++ /dev/null @@ -1,152 +0,0 @@ -# Copyright 2021 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -CONFIG_CROS_EC=y - -CONFIG_WATCHDOG=y - -# SoC configuration -CONFIG_AP=y -CONFIG_AP_X86_INTEL_TGL=y -CONFIG_FPU=y -CONFIG_ARM_MPU=y - -# eSPI -CONFIG_ESPI=y -CONFIG_PLATFORM_EC_ESPI_VW_SLP_S4=y - -CONFIG_PLATFORM_EC=y -CONFIG_SHIMMED_TASKS=y -CONFIG_I2C=y -CONFIG_PLATFORM_EC_EXTPOWER_GPIO=y -CONFIG_PLATFORM_EC_LID_SWITCH=y -CONFIG_PLATFORM_EC_POWER_BUTTON=y -CONFIG_PLATFORM_EC_CBI_EEPROM=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_HCDEBUG=n -CONFIG_PLATFORM_EC_CONSOLE_CMD_CHGRAMP=n - -# Keyboard -CONFIG_PLATFORM_EC_KEYBOARD=y -CONFIG_PLATFORM_EC_KEYBOARD_COL2_INVERTED=y -CONFIG_PLATFORM_EC_KEYBOARD_KEYPAD=y -CONFIG_PLATFORM_EC_KEYBOARD_PWRBTN_ASSERTS_KSI2=y -CONFIG_PLATFORM_EC_VOLUME_BUTTONS=y - -# Battery -CONFIG_PLATFORM_EC_BATTERY=y -CONFIG_PLATFORM_EC_BATTERY_SMART=y -CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y -CONFIG_PLATFORM_EC_BATTERY_CUT_OFF=y - -CONFIG_PLATFORM_EC_BATTERY_HW_PRESENT_CUSTOM=y -CONFIG_PLATFORM_EC_BATTERY_REVIVE_DISCONNECT=y -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC=y -CONFIG_PLATFORM_EC_CHARGER_DISCHARGE_ON_AC_CHARGER=y - -# Keyboard Backlight -CONFIG_PLATFORM_EC_PWM_KBLIGHT=y - -# LED -CONFIG_PLATFORM_EC_LED_COMMON=y -CONFIG_PLATFORM_EC_LED_PWM=y -CONFIG_PLATFORM_EC_CONSOLE_CMD_LEDTEST=n - -# Power Sequencing -CONFIG_PLATFORM_EC_POWERSEQ=y -CONFIG_PLATFORM_EC_POWERSEQ_RTC_RESET=y -CONFIG_PLATFORM_EC_POWERSEQ_S0IX=y -CONFIG_PLATFORM_EC_POWER_SLEEP_FAILURE_DETECTION=y -CONFIG_PLATFORM_EC_THROTTLE_AP=y - -# PWM -CONFIG_PWM=y -CONFIG_PWM_SHELL=n -CONFIG_PLATFORM_EC_PWM=y - -# Fan -CONFIG_PLATFORM_EC_FAN=y -CONFIG_SENSOR=y -CONFIG_SENSOR_SHELL=n -CONFIG_TACH_NPCX=y - -# Sensors -CONFIG_PLATFORM_EC_MOTIONSENSE=y -CONFIG_PLATFORM_EC_ACCEL_FIFO=y -CONFIG_PLATFORM_EC_ACCEL_INTERRUPTS=y -CONFIG_PLATFORM_EC_ALS=y -CONFIG_PLATFORM_EC_ALS_COUNT=1 -CONFIG_PLATFORM_EC_DYNAMIC_MOTION_SENSOR_COUNT=y -CONFIG_PLATFORM_EC_GMR_TABLET_MODE=y -CONFIG_PLATFORM_EC_LID_ANGLE=y -CONFIG_PLATFORM_EC_LID_ANGLE_UPDATE=y -CONFIG_PLATFORM_EC_SENSOR_TIGHT_TIMESTAMPS=y -CONFIG_PLATFORM_EC_TABLET_MODE=y - -# Sensor Drivers -CONFIG_PLATFORM_EC_ACCEL_BMA255=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI260=y -CONFIG_PLATFORM_EC_ACCELGYRO_BMI_COMM_I2C=y -CONFIG_PLATFORM_EC_ALS_TCS3400=y - -# Temperature sensors -CONFIG_PLATFORM_EC_TEMP_SENSOR=y -CONFIG_PLATFORM_EC_THERMISTOR=y - -# Miscellaneous tasks -CONFIG_HAS_TASK_KEYPROTO=y -CONFIG_HAS_TASK_POWERBTN=y - -# Miscellaneous configs -CONFIG_PLATFORM_EC_BOARD_RESET_AFTER_POWER_ON=y -CONFIG_PLATFORM_EC_HIBERNATE_PSL=y - -# MKBP event -CONFIG_PLATFORM_EC_MKBP_EVENT=y -CONFIG_PLATFORM_EC_MKBP_USE_GPIO=y - -# USB-C and charging -CONFIG_HAS_TASK_CHARGER=y -CONFIG_PLATFORM_EC_CHARGER_ISL9241=y -CONFIG_PLATFORM_EC_CHARGER_MIN_BAT_PCT_FOR_POWER_ON=3 -CONFIG_PLATFORM_EC_CHARGER_MIN_BAT_PCT_FOR_POWER_ON_WITH_AC=1 -CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT=15000 -CONFIG_PLATFORM_EC_CHARGER_MIN_POWER_MW_FOR_POWER_ON=15001 -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR=10 -CONFIG_PLATFORM_EC_CHARGER_SENSE_RESISTOR_AC=10 -CONFIG_HAS_TASK_USB_CHG_P1=y -CONFIG_PLATFORM_EC_BC12_DETECT_PI3USB9201=y -CONFIG_PLATFORM_EC_USB_PID=0x503e -CONFIG_PLATFORM_EC_USBC_PPC_SN5S330=y -CONFIG_PLATFORM_EC_USBC_PPC_SYV682X=y -CONFIG_PLATFORM_EC_USBC_RETIMER_INTEL_BB=y -CONFIG_PLATFORM_EC_USB_DRP_ACC_TRYSRC=y -CONFIG_PLATFORM_EC_USB_MUX_VIRTUAL=y -CONFIG_PLATFORM_EC_USB_PD_DEBUG_FIXED_LEVEL=y -CONFIG_PLATFORM_EC_USB_PD_DEBUG_LEVEL=2 -CONFIG_PLATFORM_EC_USB_PD_ALT_MODE_UFP=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_MEASURE_CHARGER=y -CONFIG_PLATFORM_EC_USB_PD_DISCHARGE_PPC=y -CONFIG_PLATFORM_EC_USB_PD_FRS=y -CONFIG_PLATFORM_EC_USB_PD_FRS_PPC=y -CONFIG_PLATFORM_EC_USB_PD_REV30=y -CONFIG_PLATFORM_EC_BATTERY_FUEL_GAUGE=y -CONFIG_PLATFORM_EC_USB_PD_VBUS_DETECT_TCPC=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_PS8815=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_RT1715=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_TUSB422=y -CONFIG_PLATFORM_EC_USB_PD_TCPM_MUX=y -CONFIG_HAS_TASK_PD_C1=y -CONFIG_HAS_TASK_PD_INT_C1=y -CONFIG_PLATFORM_EC_USBC_PPC_DEDICATED_INT=y -CONFIG_PLATFORM_EC_USB_A_PORT_COUNT=1 -CONFIG_PLATFORM_EC_CONSOLE_CMD_PPC_DUMP=n -CONFIG_PLATFORM_EC_CONSOLE_CMD_TCPC_DUMP=n - -# Flash -CONFIG_PLATFORM_EC_CONSOLE_CMD_FLASH=n - -# RTC -CONFIG_PLATFORM_EC_RTC=y - -CONFIG_SYSCON=y diff --git a/zephyr/projects/volteer/volteer/pwm.dts b/zephyr/projects/volteer/volteer/pwm.dts deleted file mode 100644 index f8a0fef7df..0000000000 --- a/zephyr/projects/volteer/volteer/pwm.dts +++ /dev/null @@ -1,80 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - named-pwms { - compatible = "named-pwms"; - - led1_blue: led1_blue { - #pwm-cells = <0>; - pwms = <&pwm2 0 PWM_POLARITY_INVERTED>; - label = "LED1_BLUE"; - frequency = <4800>; - }; - led2_green: led2_green { - #pwm-cells = <0>; - pwms = <&pwm0 0 PWM_POLARITY_INVERTED>; - label = "LED2_GREEN"; - frequency = <4800>; - }; - led3_red: led3_red { - #pwm-cells = <0>; - pwms = <&pwm1 0 PWM_POLARITY_INVERTED>; - label = "LED3_RED"; - frequency = <4800>; - }; - led3_sidesel: led3_sidesel { - #pwm-cells = <0>; - pwms = <&pwm7 0 PWM_POLARITY_INVERTED>; - label = "LED4_SIDESEL"; - frequency = <2400>; - }; - kblight { - pwms = <&pwm3 0 0>; - label = "KBLIGHT"; - frequency = <2400>; - }; - pwm_fan: fan { - pwms = <&pwm5 0 0>; - label = "FAN"; - frequency = <25000>; - }; - }; -}; - -/* Green LED */ -&pwm0 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; -}; - -/* Red LED */ -&pwm1 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; -}; - -/* Blue LED */ -&pwm2 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; -}; - -/* Keyboard backlight */ -&pwm3 { - status = "okay"; -}; - -/* Fan control */ -&pwm5 { - status = "okay"; - drive-open-drain; -}; - -/* Side selection LED */ -&pwm7 { - status = "okay"; - clock-bus = "NPCX_CLOCK_BUS_LFCLK"; -}; diff --git a/zephyr/projects/volteer/volteer/pwm_leds.dts b/zephyr/projects/volteer/volteer/pwm_leds.dts deleted file mode 100644 index 659cdecbf2..0000000000 --- a/zephyr/projects/volteer/volteer/pwm_leds.dts +++ /dev/null @@ -1,32 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/ { - pwmleds { - compatible = "pwm-leds"; - pwm_led0: pwm_led_0 { - pwms = <&led3_red - &led2_green - &led1_blue - &led3_sidesel - >; - }; - }; - - cros-pwmleds { - compatible = "cros-ec,pwm-leds"; - - leds = <&pwm_led0>; - - color-map-red = <100 0 0>; - color-map-green = < 0 100 0>; - color-map-blue = < 0 0 100>; - color-map-yellow = <100 70 0>; - color-map-white = <100 70 100>; - color-map-amber = <100 20 0>; - - brightness-range = <255 255 255 0 0 0>; - }; -}; diff --git a/zephyr/projects/volteer/volteer/zmake.yaml b/zephyr/projects/volteer/volteer/zmake.yaml deleted file mode 100644 index a89c0287af..0000000000 --- a/zephyr/projects/volteer/volteer/zmake.yaml +++ /dev/null @@ -1,20 +0,0 @@ -# Copyright 2020 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. - -board: volteer -dts-overlays: - - bb_retimer.dts - - cbi_eeprom.dts - - fan.dts - - gpio.dts - - keyboard.dts - - motionsense.dts - - pwm.dts - - pwm_leds.dts -supported-toolchains: - - coreboot-sdk - - zephyr -supported-zephyr-versions: - - v2.6 -output-type: npcx |