summaryrefslogtreecommitdiff
path: root/baseboard
Commit message (Expand)AuthorAgeFilesLines
* volteer: Switch to TCPC VBUS detectAbe Levkoy2020-03-181-1/+1
* volteer: enable battery cutoffKeith Short2020-03-171-3/+1
* kukui: increase PD_POWER_SUPPLY_TURN_OFF_DELAYTing Shen2020-03-171-1/+1
* Juniper: Return BP_NOT_SURE when DFET status is offDavid Huang2020-03-172-2/+22
* Dedede: Configure PROCHOT as active lowDiana Z2020-03-161-0/+1
* OCPC: Introduce charger enumDiana Z2020-03-161-0/+6
* volteer: enable DRP auto toggle and TCPC low powerKeith Short2020-03-131-2/+4
* kukui/dynamic-pdo: setting input current limit correctlyEric Yilun Lin2020-03-131-7/+17
* Mushu : enable GPU temperature sensor driver in Mushuloganliao2020-03-131-0/+3
* baseboard/ite_evb: create ite_evb baseboardRuibin Chang2020-03-124-0/+397
* dedede: Require >15W to boot without a batteryAseda Aboagye2020-03-121-0/+2
* variant trembyle: use fw_config for mux initializationDenis Brockus2020-03-125-220/+22
* trembyle: change set_mux calls to be board namesDenis Brockus2020-03-111-4/+6
* trembyle: move ps8811 from variant to boardDenis Brockus2020-03-111-56/+0
* dalboz: add usbc1 hpd mux driverLu Zhang2020-03-111-0/+22
* dalboz: use ps874x and AP internal mux as primary/secondary muxPaul Ma2020-03-111-0/+9
* volteer: Disable Burnside Bridge with TCPMv2Abe Levkoy2020-03-112-1/+11
* zork: add EC fw_config frameworkDenis Brockus2020-03-104-0/+201
* palkia: remove 1 typec port, enable USB A, remove all sensorsZhuohao Lee2020-03-102-7/+35
* Revert "Ampton: Set the PS8751 to source mode before enter low power mode"Matthew Blecker2020-03-071-1/+1
* dalboz: add FSUSB42UMX driverPaul Ma2020-03-061-0/+36
* hatch/baseboard: Enable the Search key button in maskRajat Jain2020-03-031-1/+1
* zork: Split mux/retimer for trembyle/dalbozEdward Hill2020-02-294-358/+387
* volteer: Prevent glitch on SLP_S3_L during power onKeith Short2020-02-291-0/+1
* volteer: add chargen to the set of CLI commandsNamyoon Woo2020-02-281-0/+3
* zork: add chargen to the set of CLI commandsNamyoon Woo2020-02-281-0/+3
* usb_mux: retimer: mux as chained mux and retimerDenis Brockus2020-02-2815-159/+203
* dedede: add chargen to the set of CLI commandsNamyoon Woo2020-02-281-0/+3
* hatch: Enable extpwrlimit option in ectoolShelley Chen2020-02-281-0/+1
* volteer: Configure EC_VOLUP_BTN_ODL for next buildKeith Short2020-02-272-0/+8
* dalboz: update GPIOsEdward Hill2020-02-273-22/+37
* zork: Move fan into variant_trembyle.cEdward Hill2020-02-273-67/+66
* zork: Create baseboard variants for trembyle/dalbozEdward Hill2020-02-275-56/+100
* dalboz: Add base/lid sensor configurationLu Zhang2020-02-261-91/+0
* volteer: Update USB C1 reset for next buildstabilize-volteer-12931.B-masterKeith Short2020-02-262-3/+22
* nucleo-h743zi: Separated into baseboardCraig Hesling2020-02-257-0/+271
* waddledoo: Set CMPOUT as inverted to enable 5VAseda Aboagye2020-02-251-0/+1
* TCPMV1/2: Make the PD Config Flags more consistentSam Hurst2020-02-2210-3/+13
* dedede: Set pullup on PG_PP1050_ST_OD only after RSMRSTAseda Aboagye2020-02-212-0/+18
* zork: enable usb-c FRSwapDenis Brockus2020-02-211-6/+3
* volteer: Increase I2C bus speed to 1 MHz for USB PDKeith Short2020-02-201-2/+2
* waddledoo:Handle EC_AP_PCH_PWROK_OD and ALL_SYS_PWRGDSooraj Govindan2020-02-192-0/+12
* driver/tcpm/it8xxx2: PD driver for chip it8xxx1/8xxx2Ruibin Chang2020-02-194-4/+4
* hatch: Add check for convertible SKUs in lid_angle_peripheral_enableTim Wawrzynczak2020-02-182-4/+6
* tcpci: Rename TCPC_FLAGS_TCPCI_V2_0 to TCPC_FLAGS_TCPCI_REV2_0Edward Hill2020-02-142-3/+3
* trembyle: enable TCPMv2 USB-C PD stackDenis Brockus2020-02-141-1/+4
* zork: HPD for DB OPT3 MST hubEdward Hill2020-02-142-0/+19
* zork: HPD for DB OPT1 HDMIEdward Hill2020-02-142-0/+21
* Kodama: delay to enable charger EOC and TE functionxiong.huang2020-02-141-0/+51
* baseboard/kukui: disable console cmd help in ROEric Yilun Lin2020-02-141-0/+1
View Lorry Controller Status