summaryrefslogtreecommitdiff
path: root/board/ampton/board.c
Commit message (Expand)AuthorAgeFilesLines
* AmptonE: Add motion sensor interrupt processMichael5 Chen12021-12-081-0/+8
* AmptonE: Implement EC motion sensorMichael5 Chen12021-12-071-1/+74
* adc: Remove adc_chip.h where adc.h is usedCaveh Jalali2021-08-271-1/+0
* lid_angle: Create a common callback for lid angle changesWai-Hong Tam2021-08-051-3/+1
* thermisor: move header to include dirDawid Niedzwiecki2021-04-221-1/+1
* ps8xxx: Set RP during LPM enter if TCPC acts as mux onlyPatryk Duda2021-01-281-2/+2
* ampton: Check return value in board specific mux initPatryk Duda2021-01-271-2/+3
* Move tcpic.h header into include/driverSimon Glass2021-01-071-1/+1
* ampton: change sku id 3,4 for g-sensor BMA253 in the lidJames_Chao2020-04-301-11/+40
* driver: Replace BMI160 to BMI in board configChing-Kang Yen2020-04-231-6/+6
* Revert "Ampton: Set the PS8751 to source mode before enter low power mode"Matthew Blecker2020-03-071-2/+2
* usb_mux: retimer: mux as chained mux and retimerDenis Brockus2020-02-281-9/+11
* Temp sensor: Remove action_delay_sec fieldDiana Z2020-02-141-6/+3
* board: Set Accelerometer range to 4gGwendal Grignou2019-12-171-2/+2
* board: Set min/max frequency attributesGwendal Grignou2019-12-091-0/+2
* Rename CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNTKarthikeyan Ramasubramanian2019-11-011-1/+1
* tablet_mode: Renaming for GMR sensorPhilip Chen2019-09-191-1/+1
* Remove __7b, __8b and __7bfDenis Brockus2019-07-201-5/+5
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-191-5/+5
* cleanup: Segregate USB MUX related drivers in usb_mux folderVijay Hiremath2019-07-171-1/+1
* ampton: tune the dp mux to improve external monitor compatibilityJames_Chao2019-05-071-0/+16
* Ampton: tune the gyro axis and directionJames_Chao2019-02-271-1/+7
* Ampton: correct thermistor reading functionDiana Z2019-02-131-8/+1
* Ampton: Set the PS8751 to source mode before enter low power modeJames_Chao2019-01-251-2/+2
* Ampton: tune motion sensorsJames_Chao2019-01-231-1/+7
* USB PD: PPC: Add overcurrent handling.Aseda Aboagye2019-01-171-1/+1
* Ampton: Implement the functions about ar cameraJames_Chao2018-12-051-0/+26
* Ampton: change the port0 mux to PS8751James_Chao2018-12-031-0/+38
* tablet_mode: Introduce hall sensor specific handlingFurquan Shaikh2018-11-291-1/+1
* Ampton: Correct accel sensor base reference dependent on sensor locationJames_Chao2018-11-211-8/+6
* Ampton: enable the interrupt for GPIO_BASE_SIXAXIS_INT_LJames_Chao2018-11-191-0/+6
* Ampton: add sku id for convertible skuJames_Chao2018-11-151-2/+3
* SN5S330: treat interrupts as level-sensitiveDiana Z2018-11-131-0/+8
* Ampton: add initial motion sensor codeDiana Z2018-10-311-3/+144
* bc12: rename bq24392 driver to max14637Scott Collyer2018-10-021-1/+0
* Ampton: create initial EC imageDiana Z2018-09-141-0/+122
View Lorry Controller Status