summaryrefslogtreecommitdiff
path: root/board/chell/board.h
Commit message (Expand)AuthorAgeFilesLines
* cleanup: CONFIG_USB_PD_CUSTOM_VDM is not usedDivya Sasidharan2018-04-091-1/+0
* driver/charger/isl923x: Make sure CONFIG_CHARGER_NARROW_VDC is setNicolas Boichat2018-01-101-1/+0
* charger/isl923x: Implement charger_get_system_power from PSYSNicolas Boichat2018-01-101-1/+0
* chell: Enable CONFIG_LTONicolas Boichat2018-01-041-0/+1
* chell: Disable CONFIG_CMD_I2C_XFER to free up flash spaceJenny TC2017-12-061-0/+1
* pd_log: Make PD logging more generic for general purpose loggingShawn Nematbakhsh2017-08-021-1/+0
* driver: Move PI3USB9281 to bc12 directory.Aseda Aboagye2017-07-311-2/+2
* S0ix: use both SLP_S0 interrupt and host command for s0ixJenny TC2017-07-241-1/+4
* chell: remove some console commands for space.Caveh Jalali2017-06-261-0/+10
* pd: Move PD_DEFAULT_STATE to a common define in usb_pd.hScott2017-01-261-3/+0
* skylake: Reuse the sleep event code from the common codeVijay Hiremath2017-01-061-0/+1
* skylake: Add support to S0iX based on host commands from KernelVijay Hiremath2016-11-131-1/+0
* Use CONFIG_DPTF flag instead of THROTTLE_AP.Ravi Chandra Sadineni2016-07-301-1/+1
* chell: Remove command_battfake commandGwendal Grignou2016-07-071-0/+1
* common: Decouple temp sensor from thermal throttlingMary Ruthven2016-06-281-0/+1
* BD99955: Added support for 'psys' & 'amonbmon' console commandsVijay Hiremath2016-06-271-1/+1
* cleanup: pd: Define VBUS detection sourceShawn Nematbakhsh2016-06-021-0/+1
* Deferred: Remove hard coded number of deferredsAnton Staaf2016-04-191-3/+0
* chell / kunimitsu / lars: Enable CONFIG_USB_PD_COMM_LOCKEDShawn Nematbakhsh2016-04-111-0/+1
* charge_manager: Report UNKNOWN USB charger for 2 seconds after changeShawn Nematbakhsh2016-04-031-1/+1
* ectool: Support keyboard factory scanningDevn Lu2016-04-011-0/+6
* chell: Enable HW charge ramping for BC1.2 suppliersShawn Nematbakhsh2016-03-021-0/+1
* mec1322: clock: Use full-speed 48MHz processor clock during EC bootShawn Nematbakhsh2016-02-091-1/+1
* Chell: Setting battery charging maximum value of temperatureBruce2016-02-031-0/+1
* chell: Enable S0ix power state supportDuncan Laurie2016-02-011-1/+2
* chell/glados/kunimitsu/tlars: Enable temporary host storageDuncan Laurie2016-01-251-3/+12
* chell: Add board support for asserting RTCRSTDuncan Laurie2016-01-201-0/+4
* chell / glados: Add power signal interrupt storm detectionShawn Nematbakhsh2015-11-191-0/+1
* glados / chell: Enable useful console featuresShawn Nematbakhsh2015-11-171-3/+0
* chell: Increase RO/RW image size to 104KBShawn Nematbakhsh2015-11-171-1/+1
* chell: Add keyboard backlightDuncan Laurie2015-11-131-0/+9
* chell: Enable reset of EC on PD panicDuncan Laurie2015-11-111-0/+1
* chg: add narrow VDC power path supportRong Chang2015-11-051-0/+1
* cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGsShawn Nematbakhsh2015-11-031-0/+1
* glados: oak: chell: enable USB PD loggingAlec Berg2015-10-301-0/+2
* chell: Set SPI flash chip to W25X40Duncan Laurie2015-10-271-1/+1
* mec1322: Remove CONFIG_PORT80_TASK_EN from boards.Aseda Aboagye2015-10-231-1/+0
* glados: chell: add VCONN swap abilityAlec Berg2015-10-231-0/+4
* GLaDOS: Kunimitsu: Chell: Reduce UART TX buffer to 512B.Aseda Aboagye2015-10-151-0/+3
* chell: Change image size to 100K.Aseda Aboagye2015-10-141-0/+3
* chell: Add EC/PD configuration for chell boardDuncan Laurie2015-10-121-0/+179