summaryrefslogtreecommitdiff
path: root/board/hammer
Commit message (Expand)AuthorAgeFilesLines
* hammer: Prefix configuration descriptor with RO/RW sectionstabilize-9592.15.BNicolas Boichat2017-05-251-1/+8
* hammer: Increase hook stack sizeNicolas Boichat2017-05-251-1/+1
* hammer: Store secret in rollback blockNicolas Boichat2017-05-252-1/+2
* hammer: Better RO/RB/RW split: 44/4/80 kBNicolas Boichat2017-05-231-9/+9
* hammer: Do not define CONFIG_ROLLBACK_UPDATE for RW sectionNicolas Boichat2017-05-231-0/+3
* hammer: Make keyboard work at firmware screenNicolas Boichat2017-05-181-2/+3
* usb_hid_touchpad: Add config options to set dimensionsNicolas Boichat2017-05-181-0/+16
* hammer: Add staff boardNicolas Boichat2017-05-162-1/+13
* hammer: Add pull-up on write protect pinNicolas Boichat2017-05-151-1/+1
* hammer: Disable boot keys and runtime keysNicolas Boichat2017-05-081-1/+3
* hammer: Pulse detection pin on USB wake eventNicolas Boichat2017-05-022-0/+23
* hammer: Only define required options for RO and RWNicolas Boichat2017-04-253-14/+31
* common/update_fw: Remove board-specific rw_sectionsNicolas Boichat2017-04-151-19/+0
* hammer: Enable I2C passthroughNicolas Boichat2017-04-132-4/+14
* hammer: Verify RW signature in a separate taskNicolas Boichat2017-04-111-0/+1
* hammer: Increase HOOK stack sizeNicolas Boichat2017-03-231-1/+1
* hammer: Switch to RSA 3072 exp 3 keyNicolas Boichat2017-03-162-26/+38
* hammer: Enable internal pull-up on UART RX lineNicolas Boichat2017-03-101-1/+1
* hammer: Enable CONFIG_FORCE_CONSOLE_RESUMENicolas Boichat2017-03-101-0/+1
* hammer: Switch trackpad I2C to 400 kHz, decrease EP interval to 2msNicolas Boichat2017-03-071-1/+1
* hammer: Add rollback protection flash regionNicolas Boichat2017-03-021-2/+54
* hammer: Enable LOW_POWER_IDLENicolas Boichat2017-03-011-0/+1
* hammer: Enable USB suspend and remote wake-up config optionsNicolas Boichat2017-03-011-0/+3
* hammer: Enable CONFIG_FLASH_PROTECT_RWNicolas Boichat2017-02-251-0/+2
* hammer: Change PWM frequency to 10 kHzNicolas Boichat2017-02-231-1/+1
* hammer: Switch to CONFIG_RWSIG_TYPE_RWSIGNicolas Boichat2017-02-221-1/+1
* rwsig: Add support for rwsig image typesNicolas Boichat2017-02-171-0/+1
* hammer: Do not use a dedicated pstate bank.Nicolas Boichat2017-02-141-0/+3
* hammer: Add GPIO_F to KB_OUT_PORT_LISTNicolas Boichat2017-02-092-1/+2
* hammer: Enable PWM output for keyboard backlightNicolas Boichat2017-02-072-1/+19
* hammer: Update pin layoutNicolas Boichat2017-02-071-27/+34
* hammer: Add support for USB HID touchpadNicolas Boichat2016-11-221-2/+5
* hammer: Add keyscan taskNicolas Boichat2016-11-224-1/+34
* chip/stm32/usb_hid: Separate HID keyboard supportNicolas Boichat2016-11-161-2/+3
* hammer: Switch to exponent 3 RSA keysNicolas Boichat2016-11-112-28/+28
* hammer: Add elan trackpad supportstabilize-8975.BNicolas Boichat2016-11-094-1/+12
* hammer: Initial checkoutNicolas Boichat2016-11-086-0/+261
View Lorry Controller Status