summaryrefslogtreecommitdiff
path: root/board/kohaku/gpio.inc
Commit message (Expand)AuthorAgeFilesLines
* all hatch variants: Make sure EC_RST_ODL is GPIO_LOCKEDShelley Chen2019-11-221-0/+11
* eSPI: Configure SLP_S3, SLP_S4 separatelyAbe Levkoy2019-10-301-1/+3
* hatch: Change interrupt handler for EC_RSMRST_LScott Collyer2019-09-041-1/+1
* kohaku: add TEMP_SENSOR_3 and TEMP_SENSOR_4 to DPTFPaul Fagerburg2019-08-131-1/+1
* hatch: SLP_S3/S4 sideband signals guarded with wrong configKeith Short2019-08-121-1/+1
* hatch/helios/kindred/kohaku: Enable EC-based display backlight controlPhilip Chen2019-07-021-1/+1
* kohaku: Add support for TCS3400 as clear ALS and RGB sesnorPhilip Chen2019-06-251-1/+1
* kohaku: Add vsync pin and sync driverPhilip Chen2019-06-251-1/+1
* kohaku: Update BC12_CHG_DET pins for rev1Philip Chen2019-06-251-3/+2
* hatch: Make MST support optional for subboardsPhilip Chen2019-06-141-1/+0
* kohaku:set EC_INT_L type to open drainYongBeum.Ha2019-05-231-1/+1
* kohaku: Fix the GPIO pin assignment for USB_C0_BC12_CHG_DET_LScott Collyer2019-05-171-1/+1
* kohaku: Correct SYS_RESET_L pin # in gpio.incPaul Fagerburg2019-05-081-1/+1
* hatch/kohaku: Account for TCPC reset polarity in ALERT handlerScott Collyer2019-05-081-1/+1
* kohaku: Make PP5000_A_PGOOD a power signal interruptScott Collyer2019-04-251-1/+1
* kohaku: Add missing GPIO declarationsTim Wawrzynczak2019-04-231-4/+29
* hatch/kohaku: Account for different bc1.2 chipsScott Collyer2019-04-201-0/+4
* kohaku: Remove dynamic GPIO configureation for EN_PP500_ATim Wawrzynczak2019-04-191-2/+1
* hatch/kohaku: Move HDMI support to board-specific.Tim Wawrzynczak2019-04-191-2/+0
* hatch/kohaku: Remove Type A USB support for Kohaku.Tim Wawrzynczak2019-04-191-2/+0
* kohaku: Initial image copied from hatchScott Collyer2019-04-041-0/+128