summaryrefslogtreecommitdiff
path: root/board/meep/board.c
Commit message (Expand)AuthorAgeFilesLines
* Temp sensor: Remove action_delay_sec fieldDiana Z2020-02-141-6/+3
* board: Set Accelerometer range to 4gGwendal Grignou2019-12-171-1/+1
* Define board_override_features_flags APIs as overridablednojiri2019-12-101-6/+1
* board: Set min/max frequency attributesGwendal Grignou2019-12-091-0/+2
* driver: lsm6dsm: Allow building without CONFIG_ACCEL_FIFOYuval Peress2019-11-211-1/+1
* Rename CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNTKarthikeyan Ramasubramanian2019-11-011-1/+1
* tablet_mode: Renaming for GMR sensorPhilip Chen2019-09-191-1/+1
* meep: add convertible SKU IDDevin Lu2019-09-121-5/+10
* vortininja: Re-assign sku numberWisley Chen2019-08-231-4/+4
* vortininja: Add vortininja in convertible listWisley Chen2019-08-221-3/+4
* dorp: enable ec_feature kbbacklit by SKUIDDevin Lu2019-07-291-0/+20
* Remove __7b, __8b and __7bfDenis Brockus2019-07-201-3/+3
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-191-3/+3
* driver: lsm6dsm: Move the interrupt GPIO into sensor structYuval Peress2019-05-231-0/+4
* Meep: Remove support for board version 0Diana Z2019-03-201-15/+0
* Meep: remove magnetometerDiana Z2019-02-121-25/+0
* driver: lsm6dsm: Integrate LIS2MDL behind LSM6DSMGwendal Grignou2019-02-081-12/+11
* board: indent sensor_motion arraysGwendal Grignou2019-02-081-76/+76
* drvier: lsm6dsm: Populate Gyroscope scale properlyGwendal Grignou2019-01-191-1/+1
* board/octopus: Notify SoC about USB overcurrentKarthikeyan Ramasubramanian2019-01-171-0/+10
* tablet_mode: Introduce hall sensor specific handlingFurquan Shaikh2018-11-291-1/+1
* ocotpus: move VBUS_ADC config to baseJett Rink2018-11-191-11/+0
* meep: set PD on unused interruptJett Rink2018-11-161-8/+5
* Meep: update EC GPIOs for board version 1Diana Z2018-11-151-0/+15
* meep: fix sensor data and accel orientationDevin Lu2018-10-311-5/+11
* meep: enable keyboard factory scanningDevin Lu2018-10-311-0/+18
* board/meep: Add magnetometer configKarthikeyan Ramasubramanian2018-10-191-1/+28
* bc12: rename bq24392 driver to max14637Scott Collyer2018-10-021-1/+0
* meep: Add clamshell Suspend LED BehaviorZick Wei2018-09-201-1/+1
* octopus: correct base sensor lifetimeJett Rink2018-09-171-1/+1
* type: Rename matrix_3x3_t to mat33_fp_tYilun Lin2018-09-131-1/+1
* meep: Disable accel, gyro sensors and tablet mode switch for clamshellsstabilize-jetstream-11056.BDevin Lu2018-09-111-2/+37
* octopus: use higher priority TCPC interrupt tasksJett Rink2018-09-071-12/+0
* meep: add VBUS voltage adc sensingDevin Lu2018-08-311-0/+21
* ppc: nx20p3483: Rename driver to nx20p348x to support NX20P3481Scott Collyer2018-08-161-3/+3
* meep: confirm thermistor partsDiana Z2018-08-061-1/+0
* meep: create initial EC imageDiana Z2018-07-271-0/+238
View Lorry Controller Status