summaryrefslogtreecommitdiff
path: root/board/meep
Commit message (Expand)AuthorAgeFilesLines
* Move tcpic.h header into include/driverSimon Glass2021-01-071-1/+1
* Dorp: Add CosMX B00C4473A9D0002 batteryDevin Lu2020-11-162-0/+30
* Meep: Enable SSFC for PPC on C1 portDevin Lu2020-09-102-17/+56
* Octopus: Add SSFC field for PPCDevin Lu2020-09-101-3/+3
* Meep: Set SYV682x high voltage path ilimit to 5.5ADevin Lu2020-09-101-0/+2
* Meep: Fix triggering condition for PPC interrupt of SYV682ADevin Lu2020-09-102-10/+23
* meep: enable 2nd TCPC source PS8755 for port 1Marco Chen2020-08-292-0/+21
* ec: change usage of "sane" per inclusive languagePaul Fagerburg2020-07-221-1/+1
* meep: enable 2nd ppc source syv682xDevin Lu2020-06-183-3/+55
* PD: Remove unnecessary PDCMD taskDiana Z2020-05-201-1/+0
* Temp sensor: Remove action_delay_sec fieldDiana Z2020-02-141-6/+3
* board: Set Accelerometer range to 4gGwendal Grignou2019-12-171-1/+1
* meep: correct battery discharging parameterDevin Lu2019-12-121-6/+6
* Define board_override_features_flags APIs as overridablednojiri2019-12-102-8/+1
* board: Set min/max frequency attributesGwendal Grignou2019-12-091-0/+2
* driver: lsm6dsm: Allow building without CONFIG_ACCEL_FIFOYuval Peress2019-11-211-1/+1
* Rename CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNTKarthikeyan Ramasubramanian2019-11-011-1/+1
* octopus: lock gpio config for reset signalJett Rink2019-10-191-1/+6
* tablet_mode: Renaming for GMR sensorPhilip Chen2019-09-192-2/+2
* meep: add convertible SKU IDDevin Lu2019-09-121-5/+10
* Dorp: add simplo HIGHPOWER 996QA168H batteryDevin Lu2019-09-062-0/+30
* vortininja: Re-assign sku numberWisley Chen2019-08-231-4/+4
* vortininja: Add vortininja in convertible listWisley Chen2019-08-221-3/+4
* dorp: enable ec_feature kbbacklit by SKUIDDevin Lu2019-07-292-0/+22
* dorp: add support keyboard backlightDevin Lu2019-07-292-3/+4
* Remove __7b, __8b and __7bfDenis Brockus2019-07-201-3/+3
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-191-3/+3
* driver: lsm6dsm: Move the interrupt GPIO into sensor structYuval Peress2019-05-231-0/+4
* common: led_onoff_states: move forward baseboard led_state to common codeDevin Lu2019-04-202-3/+3
* octopus: correct GPIO - KB_BL_PWR_EN to UNIMPLEMENTEDMarco Chen2019-04-131-2/+2
* ec.tasklist: Consolidate duplicate commentsDaisuke Nojiri2019-04-081-14/+1
* common: bit change 1 << constants with BIT(constants)Gwendal Grignou2019-03-261-1/+1
* motion: Define macros for custom eventsGwendal Grignou2019-03-201-1/+3
* Meep: Remove support for board version 0Diana Z2019-03-201-15/+0
* Meep: remove magnetometerDiana Z2019-02-122-31/+0
* driver: lsm6dsm: Integrate LIS2MDL behind LSM6DSMGwendal Grignou2019-02-082-13/+17
* board: indent sensor_motion arraysGwendal Grignou2019-02-081-76/+76
* drvier: lsm6dsm: Populate Gyroscope scale properlyGwendal Grignou2019-01-191-1/+1
* board/octopus: Notify SoC about USB overcurrentKarthikeyan Ramasubramanian2019-01-171-0/+10
* octopus: convert boards to use hardware intJett Rink2019-01-102-4/+1
* octopus: reduce all octopus sensor fifo sizesJett Rink2019-01-051-6/+0
* Octopus: Increase task stacks on npcx boardsDiana Z2018-12-121-11/+11
* gpio: Add configuration for EC_PCH_RTCRST GPIO in octopus boardsKarthikeyan Ramasubramanian2018-12-051-1/+1
* board/meep/gpio: Add missing GPIO configuration for Board Id 1Karthikeyan Ramasubramanian2018-11-291-1/+11
* motion_lid: Use CONFIG_TABLET_MODEFurquan Shaikh2018-11-291-2/+0
* tablet_mode: Introduce hall sensor specific handlingFurquan Shaikh2018-11-292-2/+2
* ocotpus: move VBUS_ADC config to baseJett Rink2018-11-192-16/+1
* meep: set PD on unused interruptJett Rink2018-11-161-8/+5
* Meep: update EC GPIOs for board version 1Diana Z2018-11-152-13/+20
* meep: fix sensor data and accel orientationDevin Lu2018-10-311-5/+11
View Lorry Controller Status