summaryrefslogtreecommitdiff
path: root/board/nautilus
Commit message (Expand)AuthorAgeFilesLines
* TCPMV1/2: Make the PD Config Flags more consistentSam Hurst2020-02-221-0/+1
* Temp sensor: Remove action_delay_sec fieldDiana Z2020-02-141-3/+3
* Charger: Convert boards to use new driver structureDiana Z2020-02-041-0/+11
* pd: cleanup pd_get_data_roleDenis Brockus2020-01-091-1/+2
* board: Set Accelerometer range to 4gGwendal Grignou2019-12-171-2/+2
* usb_pd_policy: Make a lot of objects commonAseda Aboagye2019-12-101-308/+2
* Rename CONFIG_USB_PD_PORT_COUNT as CONFIG_USB_PD_PORT_MAX_COUNTKarthikeyan Ramasubramanian2019-11-013-9/+10
* usb_pd: use enum tcpc_rp_value instead of intCaveh Jalali2019-10-311-1/+1
* eSPI: Configure SLP_S3, SLP_S4 separatelyAbe Levkoy2019-10-302-2/+5
* tablet_mode: Renaming for GMR sensorPhilip Chen2019-09-191-1/+1
* config: Merge CONFIG_CHARGER_V2 into CONFIG_CHARGERKeith Short2019-09-181-1/+0
* config: Refactor CONFIG_ACCEL_FIFO to enable use of IS_ENABLEDYuval Peress2019-09-031-3/+4
* power: Replace weak attr with __overridableYilun Lin2019-08-221-1/+2
* Remove __7b, __8b and __7bfDenis Brockus2019-07-202-30/+30
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-192-30/+31
* intel_x86/power: Consolidate chipset specific power signals arrayVijay Hiremath2019-06-132-32/+0
* TCPC: Make tcpc_config handle other bus typesDaisuke Nojiri2019-06-101-8/+10
* common: motion_sense: Require CONFIG_MOTION_SENSOR_MAX_COUNTYuval Peress2019-06-051-0/+1
* tcpm: Refactor tcpc_config to include a flags fieldScott Collyer2019-04-171-2/+4
* ec.tasklist: Consolidate duplicate commentsDaisuke Nojiri2019-04-081-14/+1
* common: bit change 1 << constants with BIT(constants)Gwendal Grignou2019-03-262-2/+2
* common: replace 1 << digits, with BIT(digits)Gwendal Grignou2019-03-261-2/+2
* motion: Define macros for custom eventsGwendal Grignou2019-03-201-1/+2
* nautilus,reef_mchp: Remove board_is_ramp_allowedDaisuke Nojiri2018-12-141-15/+0
* motion_lid: Use CONFIG_TABLET_MODEFurquan Shaikh2018-11-291-2/+0
* nautilus: Enable multi-profile DPTFFurquan Shaikh2018-11-151-0/+2
* dptf: Get rid of CONFIG_DPTF_DEVICE_ORIENTATIONFurquan Shaikh2018-10-301-1/+0
* ss-mux: remove unused port_addr initializationv2.0.0Jett Rink2018-09-171-2/+0
* type: Rename matrix_3x3_t to mat33_fp_tYilun Lin2018-09-131-2/+2
* nautilus: decrease UART bufferJett Rink2018-08-301-1/+1
* servo_v4: add per port dualrole settingNick Sanders2018-08-151-2/+2
* espi: Rename CONFIG_HOSTCMD_ESPI_VW_SIGNALS to CONFIG_HOSTCMD_ESPI_VW_SLP_SIG...Furquan Shaikh2018-07-273-3/+3
* nautilus: Remove the unused GPIO USB_POWERON_LPhilip Chen2018-07-172-6/+1
* espi: rename remaining eSPI optionsJett Rink2018-05-233-3/+3
* espi: convert all eSPI board to use CONFIG_HOSTCMD_ESPIJett Rink2018-05-221-2/+1
* nautilus: Move PMIC init to a deferred functionFurquan Shaikh2018-05-011-1/+4
* nautilus: Enable usb device modeFurquan Shaikh2018-05-011-1/+8
* system: update board version to return an error if encounteredJett Rink2018-04-191-2/+1
* nautilus: Shrink accelerometer FIFO to 512 entriesNicolas Boichat2018-04-101-1/+4
* cleanup: CONFIG_USB_PD_CUSTOM_VDM is not usedDivya Sasidharan2018-04-091-1/+0
* nautilus: Support tristate board id strapping pinPhilip Chen2018-04-092-0/+29
* nautilus: Lower VCCIO from 0.975V to 0.850VFurquan Shaikh2018-04-041-4/+4
* usbc: add default I2C addressesJett Rink2018-03-281-2/+12
* nautilus: enable accel force mode mask on nautilusJongpil Jung2018-03-261-0/+3
* Remove the unnecessary words of "Disable touchpad" in the commentsKaiyen Chang2018-03-261-1/+2
* Add config for boards that cannot distinguish reset typeDuncan Laurie2018-03-261-0/+1
* nautilus: Use I2C callbacks to ensure minimum bus free time for batteryFurquan Shaikh2018-03-212-0/+36
* nautilus: Increase task stack sizes, add stack analysis annotationsNicolas Boichat2018-03-192-14/+225
* nautilus : system enter hibernation on reliability testYB.Ha2018-03-191-1/+1
* driver: bma2x2: Add perform_calibGwendal Grignou2018-03-161-1/+1
View Lorry Controller Status