summaryrefslogtreecommitdiff
path: root/board/poppy/gpio.inc
Commit message (Expand)AuthorAgeFilesLines
* poppy: Disable PU on GPIO10Nicolas Boichat2020-12-211-1/+1
* eSPI: Configure SLP_S3, SLP_S4 separatelyAbe Levkoy2019-10-301-3/+4
* espi: Rename CONFIG_HOSTCMD_ESPI_VW_SIGNALS to CONFIG_HOSTCMD_ESPI_VW_SLP_SIG...Furquan Shaikh2018-07-271-2/+2
* espi: rename remaining eSPI optionsJett Rink2018-05-231-2/+2
* poppy: Enable usb device modeFurquan Shaikh2018-04-261-1/+1
* lux: Add lux boardNicolas Boichat2018-01-101-8/+44
* poppy: Disable PULL_UP on BOARD_VERSION4Nicolas Boichat2018-01-031-1/+1
* ec: Re-configure GPIO02 to be INPUT | PULL_UP for power savingayowu2017-12-141-1/+1
* ec: reconfigure GPIO60 to be INPUT | PULL_UP for power savingsRuben Rodriguez Buchillon2017-11-231-1/+1
* poppy/soraka: Add GPIO_SEL_1P8V flag for 1.8V pinsFurquan Shaikh2017-11-221-3/+3
* poppy/soraka: Change USB_C1_PD_RST_L to be GPIO_ODR_HIGHFurquan Shaikh2017-11-141-1/+1
* Poppy: change unused pins configKyoung Kim2017-10-191-2/+13
* poppy: cleanup GPIOsNicolas Boichat2017-09-281-7/+0
* poppy: Fix EC control signals to LTENicolas Boichat2017-07-271-2/+2
* poppy: Change RTCRST GPIO, LED only moved from rev5Nicolas Boichat2017-07-271-3/+3
* S0ix: use both SLP_S0 interrupt and host command for s0ixJenny TC2017-07-241-0/+5
* poppy: Change LED_YELLOW_C0 GPIO pin from GPO32 to GPIO27tonycwlin2017-07-081-1/+2
* poppy: Add 4th board id strap, with ternary encodingNicolas Boichat2017-06-111-0/+1
* poppy/soraka: Basic LED supportNicolas Boichat2017-05-181-3/+0
* poppy: ACCELGYRO3_INT_L is always on gpio 36Nicolas Boichat2017-05-181-5/+0
* poppy/soraka: Add support for poppy-rev1Nicolas Boichat2017-05-031-10/+26
* Poppy: Enter/exit from S0ix based on host commands from kernelstabilize-9428.BArchana Patni2017-04-031-1/+1
* poppy: Define WIRELESS_GPIO_WWANFurquan Shaikh2017-03-201-1/+1
* poppy: Add ANX3429 cable detection handlingNicolas Boichat2017-02-171-1/+1
* poppy: Enable BC1.2 interrupts, GPIO-based vbus detectionNicolas Boichat2017-01-231-1/+2
* poppy: Detect base connection and enable power supplyNicolas Boichat2017-01-231-3/+2
* poppy: Select CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESETFurquan Shaikh2017-01-231-1/+1
* poppy: Fix USB_C[0|1]_CHARGE_L default GPIO settingNicolas Boichat2017-01-191-4/+4
* poppy: Set PP3300_DX_CAM high and CAM_PMIC_RST_L as inputNicolas Boichat2017-01-141-2/+2
* poppy: WWAN: Drive PP3300_DX_LTE high to enable LTEJenny TC2017-01-131-1/+1
* poppy: Add ARC++ sensor support.Gwendal Grignou2017-01-111-2/+1
* poppy: Add new boardNicolas Boichat2017-01-051-0/+119
View Lorry Controller Status