summaryrefslogtreecommitdiff
path: root/board/taeko
Commit message (Expand)AuthorAgeFilesLines
* board/taeko/usbc_config.h: Format with clang-formatJack Rosenthal2022-07-011-6/+2
* board/taeko/led.c: Format with clang-formatJack Rosenthal2022-07-011-28/+33
* board/taeko/fw_config.h: Format with clang-formatJack Rosenthal2022-07-011-18/+12
* board/taeko/board.c: Format with clang-formatJack Rosenthal2022-07-011-8/+7
* board/taeko/charger.c: Format with clang-formatJack Rosenthal2022-06-301-1/+90
* board/taeko/usbc_config.c: Format with clang-formatJack Rosenthal2022-06-291-19/+18
* board/taeko/pwm.c: Format with clang-formatJack Rosenthal2022-06-291-1/+0
* board/taeko/battery.c: Format with clang-formatJack Rosenthal2022-06-291-2/+4
* board/taeko/fans.c: Format with clang-formatJack Rosenthal2022-06-291-1/+1
* board/taeko/board.h: Format with clang-formatJack Rosenthal2022-06-281-82/+64
* board/taeko/sensors.c: Format with clang-formatJack Rosenthal2022-06-281-55/+38
* board/taeko/keyboard.c: Format with clang-formatJack Rosenthal2022-06-281-2/+2
* board/taeko/fw_config.c: Format with clang-formatJack Rosenthal2022-06-281-1/+1
* taeko: remove CONFIG_CMD_POWERINDEBUG configurationamber.chen2022-06-211-0/+2
* usbc: wrap task_set_event to have an explicit port argumentFabio Baltieri2022-05-271-2/+2
* taeko: remove interrupt setup for lid accelGwendal Grignou2022-05-234-38/+4
* board: remove CONFIG_ACCEL_LIS2DW_AS_BASE variableGwendal Grignou2022-05-231-1/+0
* board/baseboard: Remove ACCEL_INTERRUPTSGwendal Grignou2022-05-231-1/+0
* taeko: fix system tablet mode will fail issuearthur.lin2022-05-201-1/+1
* tarlo: undef configuration for clamshell deviceamber.chen2022-04-131-0/+1
* taeko: set USB_C0_FRS_EN pin to LOW for NCT3807amber.chen2022-03-301-1/+1
* board/taeko: Override NVME and EMMC FW_CONFIG bits based on GPIOTim Wawrzynczak2022-03-233-1/+43
* tarlo: modify battery name and voltage max valueamber.chen2022-03-231-3/+3
* taeko/tarlo: Top row key T12, T13, T14 can't workamber.chen2022-03-221-6/+9
* taeko: modify for Prochot function settingamber.chen2022-03-141-0/+2
* taeko/tarlo: support 71wh batteryamber.chen2022-03-112-3/+58
* taeko: enable FRS on ports 0 and 1amber.chen2022-03-043-2/+6
* taeko: remove CBI eeprom wp and system unlocked settingamber.chen2022-03-021-3/+0
* taeko/tarlo: add refresh row3 config for keyboardamber.chen2022-03-021-1/+1
* gpio: cleanup header usage for sensorsKeith Short2022-02-251-0/+1
* TCPM: Change the PS8xxx I2C flags name to match the driverSam Hurst2022-02-101-5/+5
* tarlo: add keyboard number pad functionamber.chen2022-02-084-2/+54
* tarlo: De-feature volume up/down button on IO boardamber.chen2022-01-252-0/+15
* taeko: EC can't communicate normally with iisoserviceamber.chen2022-01-252-1/+5
* ec: Rename GMR_TABLET_MODE_GPIO_L to GPIO_TABLET_MODE_LAndrew McRae2022-01-201-1/+0
* tarlo: De-feature G sensorstabilize-14469.9.B-mainstabilize-14469.8.B-mainamber.chen2022-01-201-0/+3
* config: change temp_sensor_power from config to gpioMichał Barnaś2022-01-101-1/+2
* taeko: modify for G sensor second sourceamber.chen2022-01-101-3/+8
* taeko: Run TCPC1/PPC1 I2C at 1 MHz on taeko boradsamber.chen2022-01-052-2/+9
* taeko: G sensor change location to new DBamber.chen2022-01-041-0/+12
* taeko: update chg profile for protectionreno.wang2021-12-291-1/+21
* taeko: Enable VCONN control on C1 (ps8815)amber.chen2021-12-281-1/+2
* taeko: Set input current as 95% of adapter ratingreno.wang2021-12-241-0/+16
* taeko: enable BYPASS_CBI_EEPROM_WP_CHECKDan Callaghan2021-12-141-0/+1
* motion_sensor: Remove |int_signal| fieldGwendal Grignou2021-12-141-10/+0
* taeko: Correct base sensor's y/z axisreno.wang2021-12-061-3/+3
* taeko: enable PD_PREFER_LOW_VOLTAGEreno.wang2021-12-021-0/+3
* taeko: Nx20p3483 cannot sink power after reset ecreno.wang2021-11-302-2/+16
* brya boards: initialize GPIO57Boris Mittelberg2021-11-241-0/+1
* taeko: Calibrate the orientation matrixreno.wang2021-11-191-15/+12
View Lorry Controller Status