summaryrefslogtreecommitdiff
path: root/board/zoombini/board.c
Commit message (Expand)AuthorAgeFilesLines
* meowth: remove meowth/zoombini overlays and repositoriesBob Moragues2018-12-081-738/+0
* usb-c: use higher priority task for interruptsJett Rink2018-11-141-4/+19
* bc12: rename bq24392 driver to max14637Scott Collyer2018-10-021-5/+5
* ss-mux: remove unused port_addr initializationv2.0.0Jett Rink2018-09-171-4/+1
* espi: Rename CONFIG_HOSTCMD_ESPI_VW_SIGNALS to CONFIG_HOSTCMD_ESPI_VW_SLP_SIG...Furquan Shaikh2018-07-271-4/+4
* FIXUP: fix lsm6dsm driver specific data type declarationPaul Ma2018-06-221-2/+2
* ppc: making driver non-constJett Rink2018-05-241-2/+2
* espi: rename remaining eSPI optionsJett Rink2018-05-231-4/+4
* zoombini: Disable motion sense FIFO and vsyncAlexandru M Stan2018-05-141-0/+2
* usb_charger: initialize VBUS supplier at startupJett Rink2018-04-101-17/+0
* FIXUP: meowth: Add Gyro/FIFO supportGwendal Grignou2018-04-101-1/+1
* meowth: Add Sync supportGwendal Grignou2018-04-051-0/+13
* meowth: Add Gyro/FIFO supportGwendal Grignou2018-04-051-3/+7
* usbc: add default I2C addressesJett Rink2018-03-281-3/+3
* board: In motion sensor array, remove more assignment to 0Gwendal Grignou2018-03-221-38/+0
* meowth: Add support for base detection.Aseda Aboagye2018-03-201-1/+9
* board: meowth: add ST LSM6DSL sensorsGwendal Grignou2018-03-191-28/+107
* board: In motion sensor array, remove assignment to 0Gwendal Grignou2018-03-141-7/+0
* bc12: add support for active low/high on all gpio signalsJett Rink2018-03-091-0/+20
* meowth: Update board version reporting.Aseda Aboagye2018-03-051-0/+22
* meowth: zoombini: Enable PWM LED support.Aseda Aboagye2018-02-051-27/+16
* zoombini: Enable LM3630A driver for keyboard backlightBenjamin Gordon2018-01-251-0/+17
* zoombini: Add support for I2C bus 4Benjamin Gordon2018-01-231-6/+7
* meowth: zoombini: Add support for OPT3001.Aseda Aboagye2018-01-041-0/+56
* meowth: zoombini: Mask off 5V PGOOD and COMP_C.Aseda Aboagye2017-12-181-2/+11
* meowth: Fix PPC configs.Aseda Aboagye2017-12-181-8/+7
* meowth: Init LEDs off.Aseda Aboagye2017-12-181-8/+18
* zoombini: Add support for P1 PPC (port 1 and 2)Rachel Nancollas2017-12-141-0/+12
* meowth: zoombini: Reduce LED brightness.Aseda Aboagye2017-12-131-2/+19
* meowth: zoombini: Add overcurrent notification.Aseda Aboagye2017-12-121-1/+97
* zoombini: Remove EN_PP3300_TRACKPAD from Zoombini.Rachel Nancollas2017-12-081-12/+4
* meowth: zoombini: Add display backlight control.Aseda Aboagye2017-12-061-0/+14
* meowth: zoombini: Add volume buttons.Aseda Aboagye2017-12-061-0/+1
* ppc: Create generic PPC driver framework.Aseda Aboagye2017-12-061-18/+19
* meowth: zoombini: Use PPC calls instead of GPIOs.Aseda Aboagye2017-12-061-23/+26
* meowth: Add temp sensor ADC channels.Aseda Aboagye2017-11-171-3/+16
* meowth: Toggle PP1800_U on startup/shutdown.Aseda Aboagye2017-11-161-2/+6
* meowth: zoombini: Annotate ifdefs.Aseda Aboagye2017-11-161-15/+11
* Meowth: Added initial board file.Rachel Nancollas2017-11-151-4/+49
* charge_manager: Enter safe mode at bootShawn Nematbakhsh2017-11-021-27/+0
* zoombini: Limit ICL to 2.7A over 18V.Aseda Aboagye2017-10-271-0/+8
* zoombini: Add PMIC init.Aseda Aboagye2017-10-261-0/+31
* zoombini: cannonlake: Add 5V power good signal.Aseda Aboagye2017-10-261-0/+1
* zoombini: Add support for TI SN5S330 for Port 0.Aseda Aboagye2017-10-231-1/+20
* zoombini: Reject chg port none w/ critical batt.Aseda Aboagye2017-10-231-0/+15
* zoombini: Initialize Vbus suppliers.Aseda Aboagye2017-10-231-0/+15
* charge_ramp: Move ramp allowed / ilim callbacks to common codeShawn Nematbakhsh2017-10-061-23/+0
* intel_x86: Enable/disable SLP_S0 signal based on S0ix entry/exitFurquan Shaikh2017-10-031-1/+3
* power: Add flags parameter to power_signal_infoFurquan Shaikh2017-10-031-8/+8
* zoombini: Enable TCPC interrupts.Aseda Aboagye2017-09-231-0/+47
View Lorry Controller Status