summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* Clear OWNERS for factory/firmware branchfactory-whirlwind-6812.41.BBrian Norris2021-09-101-2/+0
* samus_pd: remove resetting pericom 30 sec after detecting SDPAlec Berg2015-02-211-20/+3
* samus: Only enable VCORE_PGOOD interrupt when it is validDuncan Laurie2015-02-201-0/+15
* samus: samus_pd: Increase task stack sizesShawn Nematbakhsh2015-02-202-7/+5
* samus: add i2c retries to backlight controlAlec Berg2015-02-201-15/+69
* cr50: Separate ARM core GPIOs from pinmux configurationBill Richardson2015-02-203-20/+71
* samus: initiailze boostin_voltage in extpower moduleAlec Berg2015-02-181-1/+1
* samus: panic reboot EC if PD MCU crashesAlec Berg2015-02-182-0/+7
* samus: add charge ramp moduleAlec Berg2015-02-183-0/+104
* samus: Only update fan speeds every N secondsBill Richardson2015-02-181-0/+1
* pd: charge_manager: make new VBUS charge supplierAlec Berg2015-02-184-21/+101
* samus: avoid attempting unwedge charge circuit if VBUS is at 5VAlec Berg2015-02-181-9/+20
* samus: disable i2cscan console command to save spaceAlec Berg2015-02-181-4/+5
* make idlestats console command optionalVincent Palatin2015-02-181-0/+1
* samus: avoid waking extpower task until task has been initializedAlec Berg2015-02-171-2/+8
* samus: increase extpower task stack sizeAlec Berg2015-02-141-1/+1
* pd_log: Add command to request PD MCU to write a logShawn Nematbakhsh2015-02-121-0/+17
* samus: unwedge charge circuit if not charging for long timeAlec Berg2015-02-121-12/+105
* pd: DRP: VCONN should be off at start of pd task.Todd Broch2015-02-124-0/+61
* samus: fix won't charge after zinger plugged in during EC rebootAlec Berg2015-02-101-1/+2
* CCD: Remove CCD specific board connect and disconnectAnton Staaf2015-02-101-18/+0
* stm32: Add delay after enabling peripheral clockVic Yang2015-02-102-0/+6
* llama: add llama board supportBen Lok2015-02-108-0/+457
* Plankton: Support DFU modeVic Yang2015-02-091-2/+22
* samus: prevent fast enable/disable charging loopAlec Berg2015-02-081-6/+12
* charge_manager: Wait for dualrole determination before chargingShawn Nematbakhsh2015-02-084-43/+68
* samus: give more time for recovery from charge circuit wedgedAlec Berg2015-02-071-1/+9
* samus: smoothen backlight brightness transitionsSameer Nanda2015-02-061-2/+30
* Convert motion sense calculations to fixed point.Randall Spangler2015-02-051-12/+12
* samus: fix lightbar tap sequence doesn't always show on AC eventAlec Berg2015-02-041-9/+0
* samus: enable learn mode when INA is wedgedAlec Berg2015-02-031-0/+1
* samus: automatically recover from charge circuit failuresstabilize-6752.BAlec Berg2015-02-034-114/+260
* samus_pd: Do one auto port re-detection if an SDP port is detectedShawn Nematbakhsh2015-01-311-4/+27
* ryu: improve inductive charging controlVic Yang2015-01-301-1/+1
* ryu: Implement charging profileVic Yang2015-01-293-40/+3
* pd: Log events for dingdong & hohoTodd Broch2015-01-283-1/+12
* pd: Allow multiple mode entry.Todd Broch2015-01-283-32/+40
* samus: Raise Thigh threshold to 101CDuncan Laurie2015-01-271-1/+1
* samus: Do not put touchscreen in reset based on lid switchDuncan Laurie2015-01-271-12/+0
* samus_pd: Increase pericom debounce time againShawn Nematbakhsh2015-01-271-1/+1
* samus: add battery cutoffAlec Berg2015-01-241-0/+1
* samus: Cap the max LED current to 23mASameer Nanda2015-01-241-0/+13
* ryu: Choose low input voltage whenever possibleVic Yang2015-01-241-0/+3
* ryu: Reduce max input power to 24WVic Yang2015-01-241-1/+1
* glower: Set internal VCC_PWRGD to highVic Yang2015-01-231-0/+3
* samus: only wake PD task if the task has startedAlec Berg2015-01-211-2/+4
* ryu: Only wake PD task if the task has startedVic Yang2015-01-211-1/+2
* ryu: Remove printf in interrupt handlersVic Yang2015-01-213-11/+12
* pd: dingdong/hoho: Disable USB Billboard on mode entry.Todd Broch2015-01-212-2/+16
* samus_pd: Increase pericom debounce timeShawn Nematbakhsh2015-01-211-3/+3
View Lorry Controller Status