summaryrefslogtreecommitdiff
path: root/board
Commit message (Expand)AuthorAgeFilesLines
* lantis: Override PS8805 device id for A3 chipTommy Chung2023-03-201-0/+1
* lantis: Enable 2nd TCPC source PS8805 for port 1Tommy Chung2023-03-202-1/+19
* lantis: Add SSFC bitmap for TCPC sourcesTommy Chung2023-03-202-1/+22
* chip/stm32: Interface extensions for serial flashJes B. Klinke2023-03-171-3/+8
* drawcia: Override PS8805 device id for A3 chipDevin Lu2023-03-161-0/+1
* drawcia: Enable 2nd TCPC source PS8805 for port 1Devin Lu2023-03-162-1/+19
* drawcia: Add SSFC bitmap for TCPC sourcesDevin Lu2023-03-162-1/+22
* drawcia: Update SSFC bitmap for codecDevin Lu2023-03-161-1/+12
* board/terrador: Free up more flash spaceTom Hughes2023-03-161-1/+27
* board/mushu: Free up flash spaceTom Hughes2023-03-161-2/+13
* board/garg: Free up more flashTom Hughes2023-03-161-0/+10
* Zephyr: Correct Temp sensor F75303 read methond.Logan_Liao2023-03-154-16/+2
* board/hyperdebug: Enable all three I2C portsJes B. Klinke2023-03-144-22/+108
* pdeval-stm32f072: use TCPM API insteadEric Yilun Lin2023-03-131-4/+4
* Omnigul: correct ec led codemick_hsiao2023-03-131-2/+2
* contitution: Change LED pwm active behaviorDavid Huang2023-03-101-3/+2
* servo_v4p1: Add mechanism to enable/disable USB3 to DUTŁukasz Hajec2023-03-091-5/+108
* dibbi: Implement PWM LED behaviourReka Norman2023-03-092-7/+48
* omnigul: modify GPIO50 to ODmatt_wang2023-03-091-10/+10
* Omnigul: change LED colormick_hsiao2023-03-092-14/+14
* constitution: change LED colorDavid Huang2023-03-094-21/+21
* constitution: remove qi functionDavid Huang2023-03-095-59/+0
* kuldax: config pwm channel2 to open drainben chen2023-03-081-1/+2
* Omnigul: modify keyboard matrixfelixtw_chang2023-03-081-1/+1
* board/kuldax/board.c: Support CPS8200 firmware updateDerek Huang2023-03-082-1/+3
* omnigul: modify PPC addressmatt_wang2023-03-031-1/+1
* Replace CONFIG_DMA with CONFIG_DMA_CROS in EC codebasePatryk Duda2023-03-012-2/+2
* hades: Initial ECDavid Huang2023-03-0118-0/+1887
* board/hyperdebug: Calculate SPI speed depending on clock speedJes B. Klinke2023-02-281-7/+9
* board/hyperdebug: Avoid trampling ALTERNATE modeJes B. Klinke2023-02-281-88/+96
* dibbi: Remove overridden typec_set_source_current_limit().Sam McNally2023-02-281-13/+0
* board/hyperdebug: Analog input supportJes B. Klinke2023-02-274-17/+88
* dibbi: add back the MKBP event for the power keystabilize-15359.B-mainZhuohao Lee2023-02-231-4/+0
* dibbi: Always enable EN_PP5000.Sam McNally2023-02-232-11/+2
* dibbi: Update temp sensors.Sam McNally2023-02-232-2/+17
* osiris,volmar: disable TCPC VCONNBoris Mittelberg2023-02-222-4/+1
* dibbi: Update EN_PPVAR_BJ_ADP_OD and its uses.Sam McNally2023-02-212-3/+3
* dibbi: Change EC_RECOVERY_BTN_OD to active high.Sam McNally2023-02-212-2/+3
* dibbi: Keep barrel-jack presence interrupts enabled.Sam McNally2023-02-211-2/+0
* dibbi: Set maximum PD input to 20V, 3.25A, 65W.Sam McNally2023-02-211-1/+5
* chip/stm32: ADC fixesJes B. Klinke2023-02-212-8/+4
* aurash: update EC related functionScott Chao2023-02-2015-586/+522
* board/hyperdebug: Add DAC supportJes B. Klinke2023-02-162-11/+117
* Marasov: Disable TCPC VCONNMichael5 Chen12023-02-161-1/+0
* dibbi: Configure USB_C0_SBU_MUX_FAULT as input, without pull-down.Sam McNally2023-02-151-1/+1
* dibbi: Split I2C configuration from baseboard and add HDMI-related busesSam McNally2023-02-152-2/+49
* kuldax: Using fw_config return peripheral charger countben chen2023-02-153-2/+25
* brask,coachz,constitution,kuldax,redrix: add board_get_pchg_count()ben chen2023-02-155-5/+25
* dibbi: Update board_vbus_source_enabled() to use ppc_is_sourcing_vbus().Sam McNally2023-02-151-1/+1
* dibbi: Remove configuration for CC lines.Sam McNally2023-02-152-10/+5
View Lorry Controller Status