summaryrefslogtreecommitdiff
path: root/driver/charger/isl923x.c
Commit message (Expand)AuthorAgeFilesLines
* OCPC: Calculate system & battery resistanceAseda Aboagye2020-07-211-9/+10
* raa489000: Add instantaneous curr/volt readingsAseda Aboagye2020-07-141-1/+24
* raa489000: Reset BFET to normal during initAseda Aboagye2020-07-141-0/+12
* OCPC: Use enum chg_id valuesDiana Z2020-07-111-10/+10
* Charger: Add dynamic charger chip countDiana Z2020-07-111-1/+1
* Swap system_jumped_to_this_image with _late for common codeDaisuke Nojiri2020-06-261-1/+1
* raa489000: Disable BFET in hibernateAseda Aboagye2020-06-131-7/+5
* charger/isl9238c: enable slew rate controlTing Shen2020-06-101-30/+41
* raa489000: Add support for DVCAseda Aboagye2020-06-041-0/+117
* raa489000: Keep BFET & LDO on for primary chargerAseda Aboagye2020-05-051-8/+21
* raa489000: Bit 7 of control3 is to enable autonomous chargingMarco Chen2020-04-291-1/+6
* raa489000: Add hibernate functionAseda Aboagye2020-04-211-0/+76
* raa489000: Fix get_input_current()Aseda Aboagye2020-04-151-2/+13
* ISL923x: Accept charger chip for prochot functionsDiana Z2020-03-161-4/+4
* isl923x: Add isl923x_set_comparator_inversion()Aseda Aboagye2020-02-251-0/+25
* Charger: change get_vbus_voltage to return EC errorDiana Z2020-01-281-3/+5
* Charger: Create charger driver structureDiana Z2020-01-281-112/+160
* charger: Add support for RAA489000Aseda Aboagye2020-01-181-73/+133
* battery: add precharge voltageTing Shen2019-10-011-1/+3
* isl923x: Check max current in isl923x_set_dc_prochotKo2019-07-261-0/+15
* isl923x: Fix console messagesDaisuke Nojiri2019-07-241-3/+4
* isl923x: Check max current in isl923x_set_ac_prochotDaisuke Nojiri2019-07-241-3/+10
* Remove __7b, __8b and __7bfDenis Brockus2019-07-201-8/+8
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-191-12/+15
* Nami: Add Adapter PROCHOT SettingKo2019-06-201-0/+8
* isl923x: initially disable autonomous chargingJett Rink2018-09-171-0/+6
* isl9238: read full 16-bit registerJett Rink2018-05-011-1/+1
* isl923x: Add 'charger_dump' console command.Aseda Aboagye2018-04-181-0/+35
* isl923x: Set OTG enable debounce time to 150msNicolas Boichat2018-03-271-0/+1
* isl923x: Round up requested OTG currentNicolas Boichat2018-03-091-1/+2
* isl923x: Don't initialize ICL on sysjump.Aseda Aboagye2018-02-011-0/+8
* driver/charger/isl923x: Make sure CONFIG_CHARGER_NARROW_VDC is setNicolas Boichat2018-01-101-0/+4
* charger/isl923x: Implement charger_get_system_power from PSYSNicolas Boichat2018-01-101-40/+39
* charger/isl923x: Protect CONTROL1 read-modify-write with a mutexNicolas Boichat2018-01-041-20/+48
* charge_state_v2: Add charge_set_output_current_limit functionNicolas Boichat2018-01-041-2/+2
* isl923x: Add support for reverse AMON ("OTG")Nicolas Boichat2017-12-111-22/+41
* isl923x: Use ccprintf in print_amon_bmonNicolas Boichat2017-12-111-1/+1
* isl9238: Don't reread PROG pin or reload ILIM.Aseda Aboagye2017-11-141-0/+18
* isl923x: Change charger_post_init().Aseda Aboagye2017-11-141-28/+41
* isl9238: Raise min input voltage limit.Aseda Aboagye2017-11-131-1/+11
* isl9238: Add support for providing power using OTGNicolas Boichat2017-10-201-0/+43
* isl9237: Fix HW ramp setting in charger_post_initNicolas Boichat2017-10-181-3/+3
* isl9238: Add support for battery discharging BMON current monitorNicolas Boichat2017-01-241-31/+74
* charger: isl923x: Add support for ISL9238Nicolas Boichat2017-01-051-0/+477
View Lorry Controller Status