summaryrefslogtreecommitdiff
path: root/driver/tcpm/tcpm.h
Commit message (Expand)AuthorAgeFilesLines
* tcpm: Move tcpm.h into an include directorySimon Glass2020-12-221-542/+0
* TCPC: Change SOP' disable interfaceDiana Z2020-11-181-2/+2
* tcpmv2: ifdef cleanup with IS_ENABLEDDenis Brockus2020-11-051-0/+3
* TCPMv2: Add debug detach interfaceDiana Z2020-10-191-0/+9
* tcpmv2: disable receive of SOP' during VCONN swapKeith Short2020-09-021-0/+9
* AOZ1380: initialize srcing/snking flags to reflect hardwareDenis Brockus2020-07-281-0/+22
* TCPM driver: Add prototype for tcpm frs enableEric Herrmann2020-07-091-16/+18
* Revert "TCPMv2: make sure Vbus is not sourced in AttachWait.SRC"Denis Brockus2020-07-081-10/+0
* TCPMv2: manual control to DBG_ACC in TCPCDenis Brockus2020-07-081-0/+7
* usbc: only try to use ppc_set_frs_enable if it existsPeter Marheine2020-07-061-0/+2
* TCPMv2: make sure Vbus is not sourced in AttachWait.SRCDenis Brockus2020-07-011-0/+10
* tcpm: allow returning a status from set_frs_enablePeter Marheine2020-07-011-2/+5
* tcpm: Change the get_chip_info() to prevent race conditionsWai-Hong Tam2020-06-251-1/+1
* tcpm: add attached_wait decision to common after auto-toggleDenis Brockus2020-06-241-0/+5
* tcpmv2: only enable AutoDischargeDisconnect when attachedDenis Brockus2020-06-241-13/+0
* tcpci: add 16-bit TCPC I2C accessorsCaveh Jalali2020-06-231-8/+18
* tcpc: Call default TCPC register dumpKeith Short2020-06-061-0/+2
* Extend the tcpci register dump.Andrew McRae2020-05-271-0/+10
* tcpc: AutoDischarge can be enabled on any connection wakeDenis Brockus2020-05-191-5/+2
* tcpc: change name of get_vbus_level to check_vbus_levelDenis Brockus2020-05-151-5/+6
* tcpmv2: get USB CCD working on servo_v4 with trembyleDenis Brockus2020-05-081-2/+6
* tcpmv2: reduce zork specific auto discharge disconnect codeDenis Brockus2020-03-281-14/+0
* zork: undo revert for zork on AutoDischargeDisconnectDenis Brockus2020-03-261-0/+14
* Revert "tcpmv2: cleanup auto discharge disconnect"Aseda Aboagye2020-03-261-6/+6
* tcpmv2: cleanup auto discharge disconnectDenis Brockus2020-03-201-6/+6
* nct3807: potential connection cleanupDenis Brockus2020-02-201-10/+12
* nct38xx: auto-toggle exit cleanupDenis Brockus2020-02-151-3/+3
* tcpmv2: make connect after auto-toggle driver specificDenis Brockus2020-02-131-0/+10
* tcpci: Only drive one CC line when attachedDenis Brockus2020-01-081-5/+5
* tcpci: change connect to auto discharge disconnectDenis Brockus2019-12-121-0/+16
* tcpci: add tcpc_update routines for read/mod/writeDenis Brockus2019-12-101-0/+23
* pd: FRS enable/disable and interrupt handlingDenis Brockus2019-10-071-0/+19
* ps8xxx: disable DCI modeCaveh Jalali2019-08-141-8/+18
* usb: convert cc1 from int to enumJett Rink2019-08-091-2/+4
* Remove __7b, __8b and __7bfDenis Brockus2019-07-201-18/+18
* ec_commands: Rename 'renew' to 'live' in EC_CMD_USB_PD_CHIP_INFOKarthikeyan Ramasubramanian2019-07-201-2/+2
* Use 7bit I2C/SPI slave addresses in ECDenis Brockus2019-07-191-20/+26
* TCPC: Make tcpc_config handle other bus typesDaisuke Nojiri2019-06-101-17/+17
* USB-PD: Consolidate tcpc_config declarations in usb_pd_tcpm.hDaisuke Nojiri2019-05-211-5/+0
* rammus: reconfig the PS8751 i2c port according to the board versionZhuohao Lee2018-12-201-0/+4
* tcpc: Resume suspended ports after an intervalJonathan Brandmeyer2018-10-041-0/+7
* pdchipinfo: add min firmware version to pdchipinfoJett Rink2018-09-281-1/+1
* pd: Change tcpm_set_drp_toggle() to tcpm_enable_drp_toggle()Edward Hill2018-09-171-2/+2
* tcpm: add TCPC RX circular buffer in ECJett Rink2018-09-071-16/+22
* i2c: Split i2c_xfer into locked/unlocked versions.Jonathan Brandmeyer2018-08-161-1/+11
* drivers: Refactor to use high-level i2c APIsJonathan Brandmeyer2018-08-091-2/+19
* tcpm: wait for TCPC to init upon first tcpc accessJett Rink2018-07-251-42/+22
* tcpc: debounce entry into low-power modeJett Rink2018-07-181-5/+33
* tcpm: Check appropriate NULL pointer for src ctrlDivya Sasidharan2018-04-201-1/+1
* ppc: Add tcpci snk/src control via the COMMAND registerScott Collyer2018-04-101-0/+19
View Lorry Controller Status