summaryrefslogtreecommitdiff
path: root/include/config.h
Commit message (Expand)AuthorAgeFilesLines
* mkbp_event,include/config.h: Clarify MKBP delivery method.Yilun Lin2019-03-071-1/+23
* driver: lsm6dso: Add support to LSM6DSO IMUMario Tesi2019-03-061-0/+3
* chgstv2: Make board_critical_shutdown_check specify action on critical socDaisuke Nojiri2019-03-061-6/+0
* kukui_scp: Add rpmsg name service.Peter Shih2019-03-041-0/+3
* ec: Cleanup ish config optionsMathew King2019-03-011-10/+2
* motion: Add config variable to fill LPC sense dataGwendal Grignou2019-03-011-0/+9
* config: Enable CONFIG_USB_PD_VBUS_MEASURE_CHARGER for bq25710Philip Chen2019-03-011-1/+2
* ec: cleanup: Add CONFIG_RTCJack Rosenthal2019-03-011-0/+3
* ish: add cros_ec command interface over heciJett Rink2019-02-261-0/+3
* battery: add support for mm8013 battery gaugeTing Shen2019-02-201-0/+2
* bc12: Initial driver for pi3usb9201Scott Collyer2019-02-191-0/+1
* lsm6ds3: Add LDM6DS3 variant to existing LSM6DSMJett Rink2019-02-131-0/+1
* config: Add magnetometer definitionsGwendal Grignou2019-02-081-9/+63
* cr50/ec: add a console command to display event logs.Namyoon Woo2019-02-071-0/+1
* cometlake: EC should not delay RSMRST_L by 10 msecScott Collyer2019-02-041-1/+1
* ish: add CONFIG_HECI to config.hJett Rink2019-01-281-1/+7
* ec: Add a task_reset function.Louis Collard2019-01-261-1/+22
* cometlake: Add power sequencing support for cometlake chipsetScott Collyer2019-01-241-2/+4
* mt_scp: Add support to store some code in DRAMNicolas Boichat2019-01-241-0/+15
* pd: Enable USB PD SOP' and SOP'' CommunicationSam Hurst2019-01-071-0/+3
* mt_scp: Support inter-process interrupt/communication (IPI).Yilun Lin2018-12-291-0/+15
* ISH: IPC: implement generic IPC layerHyungwoo Yang2018-12-271-0/+7
* audio_codec: add audio codec featureCheng-Yi Chiang2018-12-201-0/+3
* rammus: reconfig the PS8751 i2c port according to the board versionZhuohao Lee2018-12-201-0/+3
* oz554: Move oz554 driver code to common directoryDaisuke Nojiri2018-12-131-0/+1
* sensor: Adjust max_frequency based on EC performanceGwendal Grignou2018-12-031-2/+2
* motion_lid: Use CONFIG_TABLET_MODEFurquan Shaikh2018-11-291-11/+0
* tablet_mode: Introduce hall sensor specific handlingFurquan Shaikh2018-11-291-3/+4
* led_pwm: Add CONFIG_LED_PWM_CHARGE_STATE_ONLYEdward Hill2018-11-211-4/+14
* Battery: Use host full capacity to compute display percentageDaisuke Nojiri2018-11-161-1/+6
* USB-PD: Supply power up to 3A + 1.5ADaisuke Nojiri2018-11-161-0/+9
* chipset: Add a host command to issue AP resetWai-Hong Tam2018-11-151-0/+3
* motion_lid: Add support for setting DPTF profile based on lid angleFurquan Shaikh2018-11-151-0/+7
* dptf: Add support for DDPNFurquan Shaikh2018-11-151-0/+15
* Battery: Apply full factor to full capacityDaisuke Nojiri2018-11-141-4/+1
* SN5S330: treat interrupts as level-sensitiveDiana Z2018-11-131-0/+3
* Battery: Get display charge percentageDaisuke Nojiri2018-11-081-0/+1
* Battery: Compensate remaining charge to match full capacityDaisuke Nojiri2018-11-081-0/+14
* config: add flag for ITE EC programming over CCDVadim Bendebury2018-10-311-0/+2
* dptf: Get rid of CONFIG_DPTF_DEVICE_ORIENTATIONFurquan Shaikh2018-10-301-3/+0
* Keyboard: Add keypad supportDaisuke Nojiri2018-10-231-0/+5
* driver/mag_lis2mdl: Add LIS2MDL magnetometer moduleKarthikeyan Ramasubramanian2018-10-191-0/+1
* driver/sensorhub_lsm6dsm: Add sensor hub support in LSM6DSM moduleKarthikeyan Ramasubramanian2018-10-191-0/+1
* max17055: Support alert function.Yilun Lin2018-10-121-0/+6
* tcpc: Simplify ANX74XX device selectionJonathan Brandmeyer2018-10-041-0/+7
* bc12: rename bq24392 driver to max14637Scott Collyer2018-10-021-1/+1
* led: Board-defined tables for LED statesBen Chen2018-09-271-0/+18
* stm32h7/nocturne_fp: Enable RDP level 1, tie it to flash protection statusNicolas Boichat2018-09-221-0/+32
* aes-gcm: Adapt AES-GCM to build for ECNicolas Boichat2018-09-211-0/+3
* aes: Adapt AES code to build for ECNicolas Boichat2018-09-201-0/+3
View Lorry Controller Status