| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Normally we don't do this, but enough changes have accumulated that
we're doing a tree-wide one-off update of the name & style.
BRANCH=none
BUG=chromium:1098010
TEST=`repo upload` works
Change-Id: Icd3a1723c20595356af83d190b2c6a9078b3013b
Signed-off-by: Mike Frysinger <vapier@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/3891203
Reviewed-by: Jeremy Bettis <jbettis@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BRANCH=none
BUG=none
TEST=none
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Change-Id: Ie996435f1da99e766fb25ccad6ea27f78f5acd65
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2641128
Reviewed-by: Craig Hesling <hesling@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
| |
BRANCH=none
BUG=none
TEST=none
Change-Id: Ibd6581dbc0a8219cfb55848c7b00d564191148ff
Signed-off-by: Craig Hesling <hesling@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2072447
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Google is working to change its source code to use more inclusive
language. To that end, replace the term "dummy" with inclusive
alternatives.
BUG=b:162781382
BRANCH=None
TEST=make -j buildall
`grep -ir dummy *`
The only results are in "private/nordic_keyboard/sdk8.0.0"
which is not our code.
Signed-off-by: Sam Hurst <shurst@google.com>
Change-Id: I6a42183d998e4db4bb61625f962867fda10722e2
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2335737
Reviewed-by: Tom Hughes <tomhughes@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This CL enables gpio.wrap to correct the order of all declaration in gpio.inc.
Previously, gpio.inc had to be written such that GPIO_INTs were at the
top of the file, GPIOs following GPIO_INTs, and then IOEX_INTs before
IOEXs declaration.
This ordering was required because the signal name enums were used to
index into the interrupt handler table.
See crrev.com/c/263973 (gpio: Refactor IRQ handler pointer out of gpio_list).
This constraint not only limited the creativity and art of an individual
crafting a gpio.inc, but also made recursively including gpio.inc's
(for baseboard or other) messy and ugly.
BRANCH=none
BUG=none
TEST=make buildall
Change-Id: Ie4531b95b65728b646087f00e9434f4cfdc49287
Signed-off-by: Craig Hesling <hesling@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/2056498
Reviewed-by: Keith Short <keithshort@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This new gpio.inc macro is intended to mark pins that are unused
on a given board. This allows the chip implementation to configure them
for the lowest power configuration.
This CL brings immediate functional change.
A reference implementation is provided for the STM32F4 chip family
in crrev.com/c/1894242.
BRANCH=nocturne,hatch
BUG=b:130561737
TEST=make buildall -j
Change-Id: I0bc0a63401ae8f3bba4108b5b9f9ced26785f2bc
Signed-off-by: Craig Hesling <hesling@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1898796
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This CL creates interfaces which bring the IOEX framework to support
interrupt feature.
To declare an IOEX IO which supports the interrupt function, file its
declaration in gpio.inc with the format:
IOEX_INT(name, expin, flags, signal)
Note: like GPIO, all IOEX IOs with interrupt handlers must be declared
at the top of the IOEX's declaration in the gpio.inc
The following two APIs are added to enable/disable each IOEX IO's
interrupt function:
1. ioex_enable_interrupt
2. ioex_disable_interrupt
BRANCH=none
BUG=none
TEST=No error for "make buildall"
TEST=Apply this and related CLs, manually test each IO pins; make sure
each pin's interrupt handler is correctly executed.
Change-Id: Icbf54c09120e37b68c647c884cd6aa28d9313167
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1734947
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: CH Lin <chlin56@nuvoton.com>
Commit-Queue: Edward Hill <ecgh@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This also brings some minor Doxygen formatting to gpio.wrap.
BRANCH=none
BUG=chromium:991365
TEST=make buildall -j
Change-Id: Id6d85263b6ac472b0961240ebb266dd22591d68b
Signed-off-by: Craig Hesling <hesling@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1685772
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implement the common code to provide a friendly interface to control the
IOs of IO expander. It adopts a similar concept to GPIO.
1. Define the IO expander IO in gpio.inc by the format:
IOEX(name, EXPIN(ioex, port, offset), flags)
- name: the name of this IO pin
- EXPIN(ioex, port, offset)
- ioex: the IO expander port (defined in board.c) this IO
pin belongs to.
- port: the port number in the IO expander chip.
- offset: the bit offset in the port above.
- flags: the same as the flags of GPIO.
2. The following APIs are supported:
1. ioex_get_flags_by_mask
2. ioex_set_flags_by_mask
3. ioex_get_flags
4. ioex_set_flags
5. ioex_get_level
6. ioex_set_level
7. ioex_init
3. The following console commands are supported:
1. ioexget [IO_EXPANDER_PIN_NAME]
2. ioexset IO_EXPANDER_PIN_NAME 0/1
BRANCH=none
BUG=none
TEST=No error for "make buildall"
TEST=Apply this and related CLs, manually test each API, make sure each
function works correctly with IO expander chip (NCT3807/NCT3808.)
Change-Id: I79c9813abccc67d5554e2ceb5c119dcf549b7dce
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1657858
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: CH Lin <chlin56@nuvoton.com>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: CH Lin <chlin56@nuvoton.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ran the following command:
git grep -l 'Copyright (c)' | \
xargs sed -i 's/Copyright (c)/Copyright/g'
BRANCH=none
BUG=none
TEST=make buildall -j
Change-Id: I6cc4a0f7e8b30d5b5f97d53c031c299f3e164ca7
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1663262
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
TEST=make BOARD=kukui -j
BUG=b:80159522
BRANCH=None
Change-Id: Iea32d39923d88baaacc2973dd71615b1bacfada3
Signed-off-by: Yilun Lin <yllin@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1182702
Commit-Ready: Yilun Lin <yllin@chromium.org>
Tested-by: Yilun Lin <yllin@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Our existing GPIO macros use port# / gpio#, but the concept of different
GPIO ports does not exist on the mec1322. Therefore, add new GPIO macros
for chips which do not have distinct GPIO ports.
BUG=None
BRANCH=None
TEST=make buildall -j
Change-Id: Ibda97c6563ad447d16dab39ecadab43ccb25174b
Signed-off-by: Steven Jian <steven.jian@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/262841
Reviewed-by: Anton Staaf <robotboy@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the gpio_info struct, we had a irq_handler pointer defined even
though a majority of the GPIOs did not have irq handlers associated. By
removing the irq_handler pointer out of the struct, we can save some
space with some targets saving more than others. (For example, ~260
bytes for samus_pd).
This change also brings about a new define:
GPIO_INT(name, port, pin, flags, signal)
And the existing GPIO macro has had the signal parameter removed since
they were just NULL.
GPIO(name, port, pin, flags)
In each of the gpio.inc files, all the GPIOs with irq handlers must be
defined at the top of the file. This is because their enum values from
gpio_signal are used as the index to the gpio_irq_handlers table.
BUG=chromium:471331
BRANCH=none
TEST=Flashed ec to samus and samus_pd, verified lightbar tap, lid, power
button, keyboard, charging, all still working.
TEST=Moved a GPIO_INT declaration after a GPIO declaration and watched the build
fail.
TEST=make -j BOARD=peppy tests
TEST=make -j BOARD=auron tests
TEST=make -j BOARD=link tests
Change-Id: Id6e261b0a3cd63223ca92f2e96a80c95e85cdefb
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/263973
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Trybot-Ready: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a straightforward conversion of existing tables
into X-Macro style definitions for the GPIO alternate
functions. This change in itself, is not particularly
powerful, but having all GPIO settings in a single file
makes a board easier to understand.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=make buildall -j
Followed by manual testing of interrupt on change and UART
functionality on STM32F0 based discovery board.
Change-Id: Ib7f1f014f4bd289d7c0ac3100470ba2dc71ca579
Reviewed-on: https://chromium-review.googlesource.com/207987
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
|
|
Previously each board.h and board.c contained an enum and an array
for gpio definitons that had to be manually kept in sync, with no
compiler assistance other than that their lengths matched.
This change adds a single gpio.inc file that declares all gpio's
that a board uses and is used as an X-macro include file to
generate both the gpio_signal enum and the gpio_list array.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=none
TEST=make buildall -j
Change-Id: If9c9feca968619a59ff9f20701359bcb9374e4da
Reviewed-on: https://chromium-review.googlesource.com/205354
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
|