summaryrefslogtreecommitdiff
path: root/util/flash_ec
Commit message (Expand)AuthorAgeFilesLines
* flash_ec: enable i2c_mux before it uses I2C interfaceNamyoon Woo2019-03-071-12/+17
* flash_ec: remove board-to-npcx_(int_spi|uut) conversion logicNamyoon Woo2019-03-061-75/+20
* flash_ec: do not mark NEED_SERVO 'no' for it83xxNamyoon Woo2019-03-051-1/+1
* flash_ec: remove some boards from BOARDS_IT83XXNamyoon Woo2019-03-021-3/+0
* flash_ec: remove board-to-mec1322 conversion logicNamyoon Woo2019-03-021-10/+0
* flash_ec: remove board-to-LM4 conversion logicNamyoon Woo2019-03-021-8/+0
* flash_ec: remove some boards from BOARDS_STM32.Namyoon Woo2019-03-021-9/+0
* flash_ec: remove some boards from BOARDS_NPCX_SPINamyoon Woo2019-03-021-10/+0
* flash_ec: get ec_chip from servodNamyoon Woo2019-03-011-4/+21
* flash_ec: support flash ITE over ccd with servod.Namyoon Woo2019-03-011-27/+70
* flash_ec: remove 'BOARD' check in recognizing npcx_int_spi.Namyoon Woo2019-02-011-25/+7
* flash_ec: add "--read" and "--verify" flags for npcx chip.Namyoon Woo2019-01-301-50/+71
* flash_ec: seprate npcx_int_spi from npcx_spi.Namyoon Woo2019-01-291-13/+24
* hatch: Initial skeleton for hatchScott Collyer2019-01-241-0/+1
* flash_ec: add "--read" and "--verify" flags for stm32 chip.Namyoon Woo2019-01-231-14/+83
* casta: Add flash_ec supportPhilip Chen2018-12-181-0/+4
* flapjack: add initial content for the buildYH Lin2018-12-101-0/+2
* meowth: remove meowth/zoombini overlays and repositoriesBob Moragues2018-12-081-12/+1
* ec-devutils: install config files in a better placeDaniel Campello2018-12-061-2/+2
* Add reference to nami_fp in flash_ecYH Lin2018-12-061-1/+2
* iteflash: Refactor I2C interface and configuration handling.Matthew Blecker2018-11-021-1/+2
* flash_ec: add ampton boardJames_Chao2018-10-191-0/+1
* util/flash_ec: Restore servo setting properly on errorKarthikeyan Ramasubramanian2018-10-171-0/+1
* octopus: add servoV4 flash methodsJett Rink2018-10-121-2/+17
* iteflash: do not erase by defaultVadim Bendebury2018-10-081-1/+1
* flash_ec: Disable the flashing-mode trigger for normal UART operationWai-Hong Tam2018-10-041-8/+28
* chocodile: flash_ec support for chocodileNick Sanders2018-09-131-2/+14
* flash_ec: add rammus boardZhuohao Lee2018-09-051-0/+2
* flash_ec: Look for npcx_monitor.bin in the same dir as ec.binRaul E Rangel2018-09-041-0/+10
* flash_ec: leverage new ftdii2c_cmd interface for ite flashRuben Rodriguez Buchillon2018-08-311-4/+4
* stm32: fix flash_ec stm32 serial EC programming modeVadim Bendebury2018-08-171-17/+23
* flash_ec: support stpm32mon log optionVadim Bendebury2018-08-091-3/+13
* meep: create initial EC imageDiana Z2018-07-271-0/+1
* bobba: add bobba to flash_ec scriptJett Rink2018-07-261-0/+1
* flash_ec: Restore *_ec3po_interp_connect on cleanup()Stephen Boyd2018-07-261-10/+4
* kukui: Initial setup for ec.Yilun Lin2018-06-301-0/+2
* flash_ec: respect SERVOD_PORTRaul E Rangel2018-06-281-1/+3
* DragonEgg: Initial skeleton for DragonEggScott Collyer2018-06-271-0/+1
* wheatley: remove wheatley board driver since running out of code space.Mulin Chao2018-06-271-1/+0
* kevin/gru: remove board almost completelyJett Rink2018-06-211-7/+1
* bip: ensure AP is off during EC flashJett Rink2018-06-191-0/+3
* Remove Kahlee boardMartin Roth2018-06-151-1/+0
* fleex: add initial firmware imageJett Rink2018-06-151-0/+1
* flash_ec: stm32/npcx_uut: Set ec_boot_mode to off on exitstabilize-nocturne.10736.Bstabilize-atlas.10736.BWai-Hong Tam2018-05-301-5/+4
* grunt: Add support for flashing via Suzy-Q and servoRaul E Rangel2018-05-241-28/+97
* cleanup: make has_dut_i2c_mux check similar to other checksJett Rink2018-05-231-4/+8
* util: improve uartupdatetool (UUT) mechanismCHLin2018-05-221-48/+9
* bip: update flash script to use dut_i2c_muxJett Rink2018-05-131-0/+21
* phaser: initial files commitJett Rink2018-05-091-0/+1
* flash_ec: Add nocturne board.Aseda Aboagye2018-05-041-0/+1
View Lorry Controller Status