summaryrefslogtreecommitdiff
path: root/zephyr/projects/nissa/nivviks_overlay.dts
Commit message (Expand)AuthorAgeFilesLines
* nissa: nivviks: Declare unused GPIOsAndrew McRae2022-05-131-0/+24
* zephyr: shim: update all pwms nodes to include frequency/periodFabio Baltieri2022-04-281-1/+1
* zephyr: shim: set a placeholder period cell for pwms propertyFabio Baltieri2022-04-251-1/+1
* zephyr: nissa: add charger chipsDawid Niedzwiecki2022-04-251-0/+10
* zephyr: fan: rename named-fans to cros-ec,fansFabio Baltieri2022-04-221-3/+2
* zephyr: update nissa generated filesFabio Baltieri2022-04-141-31/+0
* nissa: Handle S5 power rails for LTE sub-boardAndrew McRae2022-04-121-0/+4
* nissa: Set I2C5_1 pins to be low voltage.Andrew McRae2022-04-081-0/+12
* nissa: Enable Nirwen fan supportAndrew McRae2022-04-081-0/+33
* Revert "nissa: Remove generated PWM configs for LEDs"Andrew McRae2022-04-061-3/+12
* Revert "nissa: Add LED handling for nivviks and nereid"Andrew McRae2022-04-061-14/+0
* Zephyr: Add general temp sensor compatibleDiana Z2022-04-051-2/+4
* zephyr: replace named-usbc-ports with named-usbc-portDawid Niedzwiecki2022-04-011-2/+9
* nissa: Add LED handling for nivviks and nereidAndrew McRae2022-03-301-0/+14
* zephyr: eliminate use of node path for battery supportDawid Niedzwiecki2022-03-291-1/+1
* nissa: Remove generated PWM configs for LEDsAndrew McRae2022-03-281-12/+3
* nissa: enable USB-A port controlPeter Marheine2022-03-151-0/+15
* nissa: enable CBI WP latch GPIOPeter Marheine2022-03-101-0/+1
* nissa: Enable tablet mode interrupts and eventsAndrew McRae2022-03-071-0/+5
* zephyr: update keyboard drivers to use Zephyr GPIOsKeith Short2022-02-241-0/+1
* nissa: configure voltage divider on EC_VSENSE_PP3300_S5Peter Marheine2022-02-181-0/+12
* zephyr: replace the ecos kblight driver for a deshimmed oneFabio Baltieri2022-02-181-12/+0
* zephyr: eeprom: use Zephry EEPROM driverDawid Niedzwiecki2022-02-151-2/+0
* write protect: extract checking write protectDawid Niedzwiecki2022-02-111-0/+5
* zephyr: nivviks: Remove PSL hibernate wakeup pin configDivya Sasidharan2022-02-071-16/+0
* zephyr: Use GPIO in eeprom WP not named-gpioAndrew McRae2022-02-021-0/+2
* zephyr: Fix named-gpios et al to drop #gpio-cellsAndrew McRae2022-02-011-5/+0
* zephyr: Convert wake-pins to use interrupt configAndrew McRae2022-02-011-3/+3
* nissa: Use aliases for sub-board GPIOsAndrew McRae2022-02-011-27/+27
* nissa: Move sub_usb_a1_vbus to nivviks_overlayAndrew McRae2022-01-311-0/+9
* zephyr: Rename irq-gpio to irq-pinAndrew McRae2022-01-281-9/+9
* nissa: Remove all non-common enum-namesAndrew McRae2022-01-271-1/+0
* nissa: Migrate nissa to use the new interrupt frameworkAndrew McRae2022-01-261-0/+51
* nissa: Use no-auto-init for optional GPIOsAndrew McRae2022-01-191-4/+4
* nissa: Add some initial sub-board setup for nivviksAndrew McRae2022-01-171-5/+29
* nissa: Remove PPC, fix task event sendAndrew McRae2022-01-131-1/+1
* zephyr: dts: drop named-gpio labels and match up net namesFabio Baltieri2022-01-041-1/+0
* nissa/nivviks: configure USB-CPeter Marheine2021-12-311-0/+38
* nissa: Add battery config to nivviksAndrew McRae2021-12-291-0/+6
* nissa: Remove EC_PSYS config from nissaAndrew McRae2021-12-291-3/+0
* nissa/nivviks: configure CBI EEPROMPeter Marheine2021-12-271-0/+11
* nissa: Fix label of TEMP_SENSOR_2Andrew McRae2021-12-231-2/+2
* nissa: Update DTS using latest generated configAndrew McRae2021-12-231-0/+135
View Lorry Controller Status