1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
|
/* Copyright 2019 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*
* Battery pack vendor provided charging profile
*/
#include "battery_fuel_gauge.h"
#include "common.h"
#include "util.h"
/*
* Battery info for all Helios battery types. Note that the fields
* start_charging_min/max and charging_min/max are not used for the charger.
* The effective temperature limits are given by discharging_min/max_c.
*
* Fuel Gauge (FG) parameters which are used for determining if the battery
* is connected, the appropriate ship mode (battery cutoff) command, and the
* charge/discharge FETs status.
*
* Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery
* register. For some batteries, the charge/discharge FET bits are set when
* charging/discharging is active, in other types, these bits set mean that
* charging/discharging is disabled. Therefore, in addition to the mask for
* these bits, a disconnect value must be specified. Note that for TI fuel
* gauge, the charge/discharge FET status is found in Operation Status (0x54),
* but a read of Manufacturer Access (0x00) will return the lower 16 bits of
* Operation status which contains the FET status bits.
*
* The assumption for battery types supported is that the charge/discharge FET
* status can be read with a sb_read() command and therefore, only the register
* address, mask, and disconnect value need to be provided.
*/
const struct board_batt_params board_battery_info[] = {
/* Simplo Battery Information */
[BATTERY_SIMPLO_C424] = {
.fuel_gauge = {
.manuf_name = "AS2GVID3jB",
.ship_mode = {
.reg_addr = 0x0,
.reg_data = { 0x10, 0x10 },
},
.fet = {
.reg_addr = 0x0,
.reg_mask = 0x2000,
.disconnect_val = 0x2000,
}
},
.batt_info = {
.voltage_max = 13200, /* mV */
.voltage_normal = 11550, /* mV */
.voltage_min = 9000, /* mV */
.precharge_current = 256, /* mA */
.start_charging_min_c = 0,
.start_charging_max_c = 45,
.charging_min_c = 0,
.charging_max_c = 60,
.discharging_min_c = 0,
.discharging_max_c = 60,
},
},
[BATTERY_SIMPLO_C436] = {
.fuel_gauge = {
.manuf_name = "AS2GVUb3jB",
.ship_mode = {
.reg_addr = 0x0,
.reg_data = { 0x10, 0x10 },
},
.fet = {
.reg_addr = 0x0,
.reg_mask = 0x2000,
.disconnect_val = 0x2000,
}
},
.batt_info = {
.voltage_max = 13200, /* mV */
.voltage_normal = 11550, /* mV */
.voltage_min = 9000, /* mV */
.precharge_current = 256, /* mA */
.start_charging_min_c = 0,
.start_charging_max_c = 45,
.charging_min_c = 0,
.charging_max_c = 60,
.discharging_min_c = 0,
.discharging_max_c = 60,
},
},
};
BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_SIMPLO_C424;
|
