1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
|
/* Copyright 2019 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "battery.h"
#include "battery_fuel_gauge.h"
#include "charge_state.h"
#include "charger_mt6370.h"
#include "console.h"
#include "driver/charger/rt946x.h"
#include "gpio.h"
#include "power.h"
#include "usb_pd.h"
#include "util.h"
#define CPRINTS(format, args...) cprints(CC_CHARGER, format, ##args)
const struct board_batt_params board_battery_info[] = {
[BATTERY_SIMPLO] = {
.fuel_gauge = {
.manuf_name = "SMP",
.device_name = "L19M3PG0",
.ship_mode = {
.reg_addr = 0x34,
.reg_data = { 0x0000, 0x1000 },
},
.fet = {
.reg_addr = 0x34,
.reg_mask = 0x0100,
.disconnect_val = 0x0100,
}
},
.batt_info = {
.voltage_max = 4400,
.voltage_normal = 3840,
.voltage_min = 3000,
.precharge_current = 256,
.start_charging_min_c = 0,
.start_charging_max_c = 45,
.charging_min_c = 0,
.charging_max_c = 60,
.discharging_min_c = -20,
.discharging_max_c = 60,
},
},
[BATTERY_CELXPERT] = {
.fuel_gauge = {
.manuf_name = "Celxpert",
.device_name = "L19C3PG0",
.ship_mode = {
.reg_addr = 0x34,
.reg_data = { 0x0000, 0x1000 },
},
.fet = {
.reg_addr = 0x34,
.reg_mask = 0x0100,
.disconnect_val = 0x0100,
}
},
.batt_info = {
.voltage_max = 4400,
.voltage_normal = 3840,
.voltage_min = 2800,
.precharge_current = 404,
.start_charging_min_c = 0,
.start_charging_max_c = 45,
.charging_min_c = 0,
.charging_max_c = 60,
.discharging_min_c = -20,
.discharging_max_c = 60,
},
},
};
BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT);
const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_SIMPLO;
enum battery_present battery_hw_present(void)
{
return gpio_get_level(GPIO_EC_BATT_PRES_ODL) ? BP_NO : BP_YES;
}
int charger_profile_override(struct charge_state_data *curr)
{
const struct battery_info *batt_info = battery_get_info();
/* battery temp in 0.1 deg C */
int bat_temp_c = curr->batt.temperature - 2731;
#ifdef VARIANT_KUKUI_CHARGER_MT6370
mt6370_charger_profile_override(curr);
#endif /* CONFIG_CHARGER_MT6370 */
/*
* When smart battery temperature is more than 45 deg C, the max
* charging voltage is 4100mV.
*/
if (curr->state == ST_CHARGE && bat_temp_c >= 450 &&
!(curr->batt.flags & BATT_FLAG_BAD_TEMPERATURE))
curr->requested_voltage = 4100;
else
curr->requested_voltage = batt_info->voltage_max;
/*
* mt6370's minimum regulated current is 500mA REG17[7:2] 0b100,
* values below 0b100 are preserved. In the other hand, it makes sure
* mt6370's VOREG set as 4400mV and minimum value of mt6370's ICHG
* is limited as 500mA.
*/
curr->requested_current = MAX(500, curr->requested_current);
return 0;
}
enum ec_status charger_profile_override_get_param(uint32_t param,
uint32_t *value)
{
return EC_RES_INVALID_PARAM;
}
enum ec_status charger_profile_override_set_param(uint32_t param,
uint32_t value)
{
return EC_RES_INVALID_PARAM;
}
|
