1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
|
/* -*- mode:c -*-
*
* Copyright 2022 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#define MODULE_KB MODULE_KEYBOARD_SCAN
/* INTERRUPT GPIOs: */
GPIO_INT(ACOK_OD, PIN(0, 0), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, extpower_interrupt)
GPIO_INT(EC_PROCHOT_IN_L, PIN(F, 0), GPIO_INT_BOTH, throttle_ap_prochot_input_interrupt)
GPIO_INT(EC_VOLDN_BTN_ODL, PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)
GPIO_INT(EC_VOLUP_BTN_ODL, PIN(9, 7), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt)
GPIO_INT(EC_WP_ODL, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)
GPIO_INT(GSC_EC_PWR_BTN_ODL, PIN(0, 1), GPIO_INT_BOTH | GPIO_HIB_WAKE_LOW, power_button_interrupt)
GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH, lid_interrupt)
GPIO_INT(SEQ_EC_ALL_SYS_PG, PIN(F, 4), GPIO_INT_BOTH, power_signal_interrupt)
GPIO_INT(SEQ_EC_DSW_PWROK, PIN(C, 7), GPIO_INT_BOTH, power_signal_interrupt)
GPIO_INT(SEQ_EC_RSMRST_ODL, PIN(E, 2), GPIO_INT_BOTH, power_signal_interrupt)
GPIO_INT(SLP_S3_L, PIN(A, 5), GPIO_INT_BOTH, power_signal_interrupt)
GPIO_INT(SLP_SUS_L, PIN(F, 1), GPIO_INT_BOTH, power_signal_interrupt)
GPIO_INT(SYS_SLP_S0IX_L, PIN(D, 5), GPIO_INT_BOTH, power_signal_interrupt)
GPIO_INT(TABLET_MODE_L, PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr)
GPIO_INT(USB_C0_BC12_INT_ODL, PIN(C, 6), GPIO_INT_FALLING, bc12_interrupt)
GPIO_INT(USB_C0_C2_TCPC_INT_ODL, PIN(E, 0), GPIO_INT_FALLING, tcpc_alert_event)
GPIO_INT(USB_C0_PPC_INT_ODL, PIN(6, 2), GPIO_INT_FALLING, ppc_interrupt)
GPIO_INT(USB_C0_RT_INT_ODL, PIN(B, 1), GPIO_INT_FALLING, retimer_interrupt)
GPIO_INT(USB_C1_BC12_INT_ODL, PIN(5, 0), GPIO_INT_FALLING, bc12_interrupt)
GPIO_INT(USB_C1_PPC_INT_ODL, PIN(F, 5), GPIO_INT_FALLING, ppc_interrupt)
GPIO_INT(USB_C1_TCPC_INT_ODL, PIN(A, 2), GPIO_INT_FALLING, tcpc_alert_event)
/* USED GPIOs: */
GPIO(CCD_MODE_ODL, PIN(E, 5), GPIO_INPUT)
GPIO(CHARGER_VAP_OTG_EN, PIN(7, 3), GPIO_OUT_LOW)
GPIO(CPU_C10_GATE_L, PIN(6, 7), GPIO_INPUT)
GPIO(EC_BATT_PRES_ODL, PIN(A, 3), GPIO_INPUT)
GPIO(EC_ENTERING_RW, PIN(0, 3), GPIO_OUT_LOW)
GPIO(EC_EN_EDP_BL, PIN(D, 3), GPIO_OUT_HIGH)
GPIO(EC_GSC_PACKET_MODE, PIN(7, 5), GPIO_OUT_LOW)
GPIO(EC_I2C_BAT_SCL, PIN(3, 3), GPIO_INPUT)
GPIO(EC_I2C_BAT_SDA, PIN(3, 6), GPIO_INPUT)
GPIO(EC_I2C_MISC_SCL_R, PIN(B, 3), GPIO_INPUT)
GPIO(EC_I2C_MISC_SDA_R, PIN(B, 2), GPIO_INPUT)
GPIO(EC_I2C_SENSOR_SCL, PIN(B, 5), GPIO_INPUT | GPIO_SEL_1P8V)
GPIO(EC_I2C_SENSOR_SDA, PIN(B, 4), GPIO_INPUT | GPIO_SEL_1P8V)
GPIO(EC_I2C_USB_C0_C2_PPC_BC_SCL, PIN(9, 2), GPIO_INPUT)
GPIO(EC_I2C_USB_C0_C2_PPC_BC_SDA, PIN(9, 1), GPIO_INPUT)
GPIO(EC_I2C_USB_C0_C2_RT_SCL, PIN(D, 1), GPIO_INPUT)
GPIO(EC_I2C_USB_C0_C2_RT_SDA, PIN(D, 0), GPIO_INPUT)
GPIO(EC_I2C_USB_C0_C2_TCPC_SCL, PIN(9, 0), GPIO_INPUT)
GPIO(EC_I2C_USB_C0_C2_TCPC_SDA, PIN(8, 7), GPIO_INPUT)
GPIO(EC_I2C_USB_C1_MIX_SCL, PIN(E, 4), GPIO_INPUT)
GPIO(EC_I2C_USB_C1_MIX_SDA, PIN(E, 3), GPIO_INPUT)
GPIO(EC_I2C_USB_C1_TCPC_SCL, PIN(F, 3), GPIO_INPUT)
GPIO(EC_I2C_USB_C1_TCPC_SDA, PIN(F, 2), GPIO_INPUT)
GPIO(EC_KB_BL_EN_L, PIN(8, 6), GPIO_OUT_HIGH)
GPIO(EC_PCHHOT_ODL, PIN(7, 4), GPIO_INPUT)
GPIO(EC_PCH_INT_ODL, PIN(B, 0), GPIO_ODR_HIGH)
GPIO(EC_PCH_PWR_BTN_ODL, PIN(C, 1), GPIO_ODR_HIGH)
GPIO(EC_PCH_RSMRST_L, PIN(A, 6), GPIO_OUT_LOW)
GPIO(EC_PCH_RTCRST, PIN(7, 6), GPIO_OUT_LOW)
GPIO(EC_PCH_SYS_PWROK, PIN(3, 7), GPIO_OUT_LOW)
GPIO(EC_PCH_WAKE_R_ODL, PIN(C, 0), GPIO_ODR_HIGH)
GPIO(EC_PROCHOT_ODL, PIN(6, 3), GPIO_ODR_HIGH)
GPIO(EN_PP5000_FAN, PIN(6, 1), GPIO_OUT_HIGH)
GPIO(EN_PP5000_USBA_R, PIN(D, 7), GPIO_OUT_LOW)
GPIO(EN_S5_RAILS, PIN(B, 6), GPIO_OUT_LOW)
GPIO(IMVP9_VRRDY_OD, PIN(4, 3), GPIO_INPUT)
GPIO(PCH_PWROK, PIN(7, 2), GPIO_OUT_LOW)
GPIO(SYS_RST_ODL, PIN(C, 5), GPIO_ODR_HIGH)
GPIO(USB_C0_C2_TCPC_RST_ODL, PIN(A, 7), GPIO_ODR_LOW)
GPIO(USB_C1_FRS_EN, PIN(9, 4), GPIO_OUT_LOW)
GPIO(USB_C1_RST_ODL, PIN(9, 6), GPIO_ODR_LOW)
GPIO(USB_C1_RT_INT_ODL, PIN(A, 0), GPIO_INPUT)
GPIO(USB_C1_RT_RST_R_ODL, PIN(0, 2), GPIO_ODR_LOW)
GPIO(VCCST_PWRGD_OD, PIN(A, 4), GPIO_ODR_LOW)
GPIO(LED_1_L, PIN(C, 4), GPIO_OUT_HIGH)
GPIO(LED_2_L, PIN(C, 3), GPIO_OUT_HIGH)
/* UART alternate functions */
ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* GPIO64/CR_SIN1, GPO65/CR_SOUT1/FLPRG1_L */
/* I2C alternate functions */
ALTERNATE(PIN_MASK(3, 0x48), 0, MODULE_I2C, 0) /* GPIO33/I2C5_SCL0/CTS_L, GPIO36/RTS_L/I2C5_SDA0 */
ALTERNATE(PIN_MASK(8, 0x80), 0, MODULE_I2C, 0) /* GPIO87/I2C1_SDA0 */
ALTERNATE(PIN_MASK(9, 0x07), 0, MODULE_I2C, 0) /* GPIO92/I2C2_SCL0, GPIO91/I2C2_SDA0, GPIO90/I2C1_SCL0 */
ALTERNATE(PIN_MASK(B, 0x0c), 0, MODULE_I2C, 0) /* GPIOB3/I2C7_SCL0/DCD_L, GPIOB2/I2C7_SDA0/DSR_L */
ALTERNATE(PIN_MASK(B, 0x30), 0, MODULE_I2C, GPIO_SEL_1P8V) /* GPIOB5/I2C0_SCL0, GPIOB4/I2C0_SDA0 */
ALTERNATE(PIN_MASK(D, 0x03), 0, MODULE_I2C, 0) /* GPIOD1/I2C3_SCL0, GPIOD0/I2C3_SDA0 */
ALTERNATE(PIN_MASK(E, 0x18), 0, MODULE_I2C, 0) /* GPIOE4/I2C6_SCL1/I3C_SCL, GPIOE3/I2C6_SDA1/I3C_SDA */
ALTERNATE(PIN_MASK(F, 0x0c), 0, MODULE_I2C, 0) /* GPIOF3/I2C4_SCL1, GPIOF2/I2C4_SDA1 */
/* PWM alternate functions */
ALTERNATE(PIN_MASK(4, 0x01), 0, MODULE_PWM, 0) /* GPIO40/TA1 */
ALTERNATE(PIN_MASK(8, 0x01), 0, MODULE_PWM, 0) /* GPIO80/PWM3 */
ALTERNATE(PIN_MASK(B, 0x80), 0, MODULE_PWM, 0) /* GPIOB7/PWM5 */
/* ADC alternate functions */
ALTERNATE(PIN_MASK(3, 0x10), 0, MODULE_ADC, 0) /* GPIO34/PS2_DAT2/ADC6 */
ALTERNATE(PIN_MASK(4, 0x34), 0, MODULE_ADC, 0) /* GPIO42/ADC3/RI_L, GPIO45/ADC0, GPIO44/ADC1 */
/* KB alternate functions */
ALTERNATE(PIN_MASK(0, 0xf0), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO10&P80_CLK/GPIO07, KSO11&P80_DAT/GPIO06, KSO12/GPIO05, KSO13/GPIO04 */
ALTERNATE(PIN_MASK(1, 0x7f), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO06/GPO13/GP_SEL_L, KSO07/GPO12/JEN_L, KSO03/GPIO16/JTAG_TDO0_SWO, KSO04/GPIO15/XNOR, KSO05/GPIO14, KSO08/GPIO11/CR_SOUT1, KSO09/GPIO10/CR_SIN1 */
ALTERNATE(PIN_MASK(2, 0xfc), 0, MODULE_KB, GPIO_INPUT | GPIO_PULL_UP) /* KSI2/GPIO27/TRACEDATA1, KSI3/GPIO26/TRACEDATA0, KSI4/GPIO25/TRACECLK/GP_SCLK, KSI5/GPIO24/GP_MISO, KSI6/GPIO23/S_SBUB, KSI7/GPIO22/S_SBUA */
ALTERNATE(PIN_MASK(2, 0x03), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO00/GPIO21/JTAG_TCK_SWCLK, KSO01/GPIO20/JTAG_TMS_SWIO */
ALTERNATE(PIN_MASK(3, 0x03), 0, MODULE_KB, GPIO_INPUT | GPIO_PULL_UP) /* KSI0/GPIO31/TRACEDATA3/GP_MOSI, KSI1/GPIO30/TRACEDATA2/GP_CS_L */
ALTERNATE(PIN_MASK(8, 0x04), 0, MODULE_KB, GPIO_ODR_HIGH) /* KSO14/GPIO82 */
/* PMU alternate functions */
ALTERNATE(PIN_MASK(0, 0x01), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH) /* PSL_IN2_L&GPI00/GPIO00 */
ALTERNATE(PIN_MASK(0, 0x02), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_LOW) /* GPIO01/PSL_IN3_L&GPI01 */
ALTERNATE(PIN_MASK(D, 0x04), 0, MODULE_PMU, GPIO_INT_BOTH | GPIO_HIB_WAKE_HIGH) /* PSL_IN1_L&GPID2/GPIOD2 */
/* Unused Pins */
UNUSED(PIN(D, 6)) /* GPOD6/CR_SOUT3/SHDF_ESPI_L */
UNUSED(PIN(3, 2)) /* GPO32/TRIS_L */
UNUSED(PIN(3, 4)) /* GPIO34 */
UNUSED(PIN(3, 5)) /* GPO35/CR_SOUT4/TEST_L */
UNUSED(PIN(6, 6)) /* GPIO66 */
UNUSED(PIN(5, 7)) /* GPIO57/SER_IRQ/ESPI_ALERT_L */
UNUSED(PIN(8, 3)) /* GPIO83 */
UNUSED(PIN(7, 0)) /* GPIO70 */
UNUSED(PIN(4, 1)) /* GPIO41 */
UNUSED(PIN(8, 1)) /* GPIO81 */
UNUSED(PIN(5, 6)) /* GPIO56 */
/* Pre-configured PSL balls: J8 K6 */
/*
* The NPCX keyboard driver does not use named GPIOs to access
* keyboard scan pins, so we do not list them in *gpio.inc. However, when
* KEYBOARD_COL2_INVERTED is defined, this name is required.
*/
GPIO(EC_KSO_02_INV, PIN(1, 7), GPIO_OUT_LOW)
GPIO(USB_C0_OC_ODL, PIN(D, 4), GPIO_ODR_HIGH)
GPIO(USB_C0_FRS_EN, PIN(6, 0), GPIO_LOW)
GPIO(USB_C0_RT_RST_ODL, PIN(C, 2), GPIO_ODR_LOW)
GPIO(USB_C1_OC_ODL, PIN(E, 1), GPIO_ODR_HIGH)
|
