summaryrefslogtreecommitdiff
path: root/board/storo/board.c
blob: 65fa6c917f72a696d751a92448e27465a86ae43d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
/* Copyright 2021 The ChromiumOS Authors
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* Storo configuration */

#include "adc_chip.h"
#include "button.h"
#include "cbi_fw_config.h"
#include "cros_board_info.h"
#include "cbi_ssfc.h"
#include "charge_manager.h"
#include "charge_state_v2.h"
#include "charger.h"
#include "driver/accel_lis2dw12.h"
#include "driver/accel_bma2x2.h"
#include "driver/accel_kionix.h"
#include "driver/accelgyro_bmi_common.h"
#include "driver/accelgyro_bmi260.h"
#include "driver/accelgyro_icm_common.h"
#include "driver/accelgyro_icm42607.h"
#include "driver/bc12/pi3usb9201.h"
#include "driver/charger/isl923x.h"
#include "driver/retimer/tusb544.h"
#include "driver/temp_sensor/thermistor.h"
#include "driver/tcpm/raa489000.h"
#include "driver/usb_mux/it5205.h"
#include "gpio.h"
#include "hooks.h"
#include "intc.h"
#include "keyboard_raw.h"
#include "keyboard_scan.h"
#include "lid_switch.h"
#include "power.h"
#include "power_button.h"
#include "pwm.h"
#include "pwm_chip.h"
#include "switch.h"
#include "system.h"
#include "tablet_mode.h"
#include "task.h"
#include "tcpm/tcpci.h"
#include "temp_sensor.h"
#include "uart.h"
#include "usb_charge.h"
#include "usb_mux.h"
#include "usb_pd.h"
#include "usb_pd_tcpm.h"

#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ##args)
#define CPRINTF(format, args...) cprints(CC_SYSTEM, format, ##args)

#define INT_RECHECK_US 5000

/* C0 interrupt line shared by BC 1.2 and charger */
static void check_c0_line(void);
DECLARE_DEFERRED(check_c0_line);

static void notify_c0_chips(void)
{
	schedule_deferred_pd_interrupt(0);
	usb_charger_task_set_event(0, USB_CHG_EVENT_BC12);
}

static void check_c0_line(void)
{
	/*
	 * If line is still being held low, see if there's more to process from
	 * one of the chips
	 */
	if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
		notify_c0_chips();
		hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
	}
}

static void usb_c0_interrupt(enum gpio_signal s)
{
	/* Cancel any previous calls to check the interrupt line */
	hook_call_deferred(&check_c0_line_data, -1);

	/* Notify all chips using this line that an interrupt came in */
	notify_c0_chips();

	/* Check the line again in 5ms */
	hook_call_deferred(&check_c0_line_data, INT_RECHECK_US);
}

/* C1 interrupt line shared by BC 1.2, TCPC, and charger */
static void check_c1_line(void);
DECLARE_DEFERRED(check_c1_line);

static void notify_c1_chips(void)
{
	schedule_deferred_pd_interrupt(1);
	usb_charger_task_set_event(1, USB_CHG_EVENT_BC12);
}

static void check_c1_line(void)
{
	/*
	 * If line is still being held low, see if there's more to process from
	 * one of the chips.
	 */
	if (!gpio_get_level(GPIO_USB_C1_INT_ODL)) {
		notify_c1_chips();
		hook_call_deferred(&check_c1_line_data, INT_RECHECK_US);
	}
}

static void usb_c1_interrupt(enum gpio_signal s)
{
	/* Cancel any previous calls to check the interrupt line */
	hook_call_deferred(&check_c1_line_data, -1);

	/* Notify all chips using this line that an interrupt came in */
	notify_c1_chips();

	/* Check the line again in 5ms */
	hook_call_deferred(&check_c1_line_data, INT_RECHECK_US);
}

static void c0_ccsbu_ovp_interrupt(enum gpio_signal s)
{
	cprints(CC_USBPD, "C0: CC OVP, SBU OVP, or thermal event");
	pd_handle_cc_overvoltage(0);
}

static void pen_detect_interrupt(enum gpio_signal s)
{
	int pen_detect = !gpio_get_level(GPIO_PEN_DET_ODL);

	gpio_set_level(GPIO_EN_PP3300_PEN, pen_detect);
}

/* Must come after other header files and interrupt handler declarations */
#include "gpio_list.h"

/* ADC channels */
const struct adc_t adc_channels[] = {
	[ADC_VSNS_PP3300_A] = { .name = "PP3300_A_PGOOD",
				.factor_mul = ADC_MAX_MVOLT,
				.factor_div = ADC_READ_MAX + 1,
				.shift = 0,
				.channel = CHIP_ADC_CH0 },
	[ADC_TEMP_SENSOR_1] = { .name = "TEMP_SENSOR1",
				.factor_mul = ADC_MAX_MVOLT,
				.factor_div = ADC_READ_MAX + 1,
				.shift = 0,
				.channel = CHIP_ADC_CH2 },
	[ADC_TEMP_SENSOR_2] = { .name = "TEMP_SENSOR2",
				.factor_mul = ADC_MAX_MVOLT,
				.factor_div = ADC_READ_MAX + 1,
				.shift = 0,
				.channel = CHIP_ADC_CH3 },
	[ADC_TEMP_SENSOR_3] = { .name = "TEMP_SENSOR3",
				.factor_mul = ADC_MAX_MVOLT,
				.factor_div = ADC_READ_MAX + 1,
				.shift = 0,
				.channel = CHIP_ADC_CH15 },
};
BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);

/* BC 1.2 chips */
const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = {
	{
		.i2c_port = I2C_PORT_USB_C0,
		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
		.flags = PI3USB9201_ALWAYS_POWERED,
	},
	{
		.i2c_port = I2C_PORT_SUB_USB_C1,
		.i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS,
		.flags = PI3USB9201_ALWAYS_POWERED,
	},
};

int pd_snk_is_vbus_provided(int port)
{
	return pd_check_vbus_level(port, VBUS_PRESENT);
}

/* Charger chips */
const struct charger_config_t chg_chips[] = {
	[CHARGER_PRIMARY] = {
		.i2c_port = I2C_PORT_USB_C0,
		.i2c_addr_flags = ISL923X_ADDR_FLAGS,
		.drv = &isl923x_drv,
	},
	[CHARGER_SECONDARY] = {
		.i2c_port = I2C_PORT_SUB_USB_C1,
		.i2c_addr_flags = ISL923X_ADDR_FLAGS,
		.drv = &isl923x_drv,
	},
};

/* TCPCs */
const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = {
	{
		.bus_type = EC_BUS_TYPE_I2C,
		.i2c_info = {
			.port = I2C_PORT_USB_C0,
			.addr_flags = RAA489000_TCPC0_I2C_FLAGS,
		},
		.flags = TCPC_FLAGS_TCPCI_REV2_0,
		.drv = &raa489000_tcpm_drv,
	},
	{
		.bus_type = EC_BUS_TYPE_I2C,
		.i2c_info = {
			.port = I2C_PORT_SUB_USB_C1,
			.addr_flags = RAA489000_TCPC0_I2C_FLAGS,
		},
		.flags = TCPC_FLAGS_TCPCI_REV2_0,
		.drv = &raa489000_tcpm_drv,
	},
};

/* USB Retimer */
enum tusb544_conf { USB_DP = 0, USB_DP_INV, USB, USB_INV, DP, DP_INV };

/*
 * Registers we care about of are all the same between NCS8510 and TUSB544,
 * so we leverage the driver of TUSB544 to control both of them.
 *
 * For EQ settings, these two chips are also almost the same, so we have one
 * set of EQ settings here for both of them as well. When you need to modify
 * the EQ settings, please make sure that both configurations are correct;
 * otherwise you need to separate EQ settings then.
 */
static int board_tusb544_set(const struct usb_mux *me, mux_state_t mux_state)
{
	int rv = EC_SUCCESS;
	int reg;
	enum tusb544_conf usb_mode = 0;

	if (mux_state & USB_PD_MUX_USB_ENABLED) {
		if (mux_state & USB_PD_MUX_DP_ENABLED) {
			/* USB with DP */
			usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED) ?
					   USB_DP_INV :
					   USB_DP;
		} else {
			/* USB without DP */
			usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED) ?
					   USB_INV :
					   USB;
		}
	} else if (mux_state & USB_PD_MUX_DP_ENABLED) {
		/* DP without USB */
		usb_mode = (mux_state & USB_PD_MUX_POLARITY_INVERTED) ? DP_INV :
									DP;
	} else {
		return EC_SUCCESS;
	}

	rv = i2c_read8(me->i2c_port, me->i2c_addr_flags, TUSB544_REG_GENERAL6,
		       &reg);
	if (rv)
		return rv;

	reg |= TUSB544_VOD_DCGAIN_OVERRIDE;
	reg &= ~TUSB544_VOD_DCGAIN_SEL;
	reg |= (TUSB544_VOD_DCGAIN_SETTING_5 << 2);

	rv = i2c_write8(me->i2c_port, me->i2c_addr_flags, TUSB544_REG_GENERAL6,
			reg);
	if (rv)
		return rv;

	/* Write the retimer config byte */
	if (usb_mode == USB_INV) {
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_GENERAL4, 0x15);
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_USB3_1_1, 0xff);
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_USB3_1_2, 0xff);
	} else if (usb_mode == USB) {
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_GENERAL4, 0x11);
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_USB3_1_1, 0xff);
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_USB3_1_2, 0xff);
	} else if (usb_mode == USB_DP_INV) {
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_GENERAL4, 0x1F);
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_USB3_1_1, 0xff);
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_USB3_1_2, 0xff);
	} else if (usb_mode == USB_DP) {
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_GENERAL4, 0x1B);
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_USB3_1_1, 0xff);
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_USB3_1_2, 0xff);
	} else if (usb_mode == DP_INV) {
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_GENERAL4, 0x1E);
	} else if (usb_mode == DP) {
		rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
				 TUSB544_REG_GENERAL4, 0x1A);
	}

	rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
			 TUSB544_REG_DISPLAYPORT_1, 0x66);
	rv |= i2c_write8(me->i2c_port, me->i2c_addr_flags,
			 TUSB544_REG_DISPLAYPORT_2, 0x66);
	if (rv)
		return EC_ERROR_UNKNOWN;
	else
		return EC_SUCCESS;
}

/* USB Retimer */
const struct usb_mux_chain usbc1_retimer = {
	.mux =
		&(const struct usb_mux){
			.usb_port = 1,
			.i2c_port = I2C_PORT_SUB_USB_C1,
			.i2c_addr_flags = TUSB544_I2C_ADDR_FLAGS0,
			.driver = &tusb544_drv,
			.board_set = &board_tusb544_set,
		},
};

/* USB Muxes */
const struct usb_mux_chain usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = {
	{
		.mux =
			&(const struct usb_mux){
				.usb_port = 0,
				.i2c_port = I2C_PORT_USB_C0,
				.i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS,
				.driver = &it5205_usb_mux_driver,
			},
	},
	{
		.mux =
			&(const struct usb_mux){
				.usb_port = 1,
				.i2c_port = I2C_PORT_SUB_USB_C1,
				.i2c_addr_flags = IT5205_I2C_ADDR1_FLAGS,
				.driver = &it5205_usb_mux_driver,
			},
		.next = &usbc1_retimer,
	},
};

void board_hibernate(void)
{
	/*
	 * Put all charger ICs present into low power mode before entering
	 * z-state.
	 */
	raa489000_hibernate(CHARGER_PRIMARY, true);
	if (board_get_charger_chip_count() > 1)
		raa489000_hibernate(CHARGER_SECONDARY, true);
}

__override void board_ocpc_init(struct ocpc_data *ocpc)
{
	/* There's no provision to measure Isys */
	ocpc->chg_flags[CHARGER_SECONDARY] |= OCPC_NO_ISYS_MEAS_CAP;
}

__override void board_pulse_entering_rw(void)
{
	/*
	 * On the ITE variants, the EC_ENTERING_RW signal was connected to a pin
	 * which is active high by default.  This causes Cr50 to think that the
	 * EC has jumped to its RW image even though this may not be the case.
	 * The pin is changed to GPIO_EC_ENTERING_RW2.
	 */
	gpio_set_level(GPIO_EC_ENTERING_RW, 1);
	gpio_set_level(GPIO_EC_ENTERING_RW2, 1);
	usleep(MSEC);
	gpio_set_level(GPIO_EC_ENTERING_RW, 0);
	gpio_set_level(GPIO_EC_ENTERING_RW2, 0);
}

void board_reset_pd_mcu(void)
{
	/*
	 * Nothing to do.  TCPC C0 is internal, TCPC C1 reset pin is not
	 * connected to the EC.
	 */
}

__override void board_power_5v_enable(int enable)
{
	/*
	 * Motherboard has a GPIO to turn on the 5V regulator, but the sub-board
	 * sets it through the charger GPIO.
	 */
	gpio_set_level(GPIO_EN_PP5000, !!enable);
	gpio_set_level(GPIO_EN_USB_A0_VBUS, !!enable);
	if (isl923x_set_comparator_inversion(1, !!enable))
		CPRINTS("Failed to %sable sub rails!", enable ? "en" : "dis");
}

uint16_t tcpc_get_alert_status(void)
{
	uint16_t status = 0;
	int regval;

	/*
	 * The interrupt line is shared between the TCPC and BC1.2 detector IC.
	 * Therefore, go out and actually read the alert registers to report the
	 * alert status.
	 */
	if (!gpio_get_level(GPIO_USB_C0_INT_ODL)) {
		if (!tcpc_read16(0, TCPC_REG_ALERT, &regval)) {
			if (regval)
				status = PD_STATUS_TCPC_ALERT_0;
		}
	}

	/* Check whether TCPC 1 pulled the shared interrupt line */
	if (!gpio_get_level(GPIO_USB_C1_INT_ODL)) {
		if (!tcpc_read16(1, TCPC_REG_ALERT, &regval)) {
			if (regval)
				status = PD_STATUS_TCPC_ALERT_1;
		}
	}

	return status;
}

void board_set_charge_limit(int port, int supplier, int charge_ma, int max_ma,
			    int charge_mv)
{
	charge_set_input_current_limit(charge_ma, charge_mv);
}

int board_is_sourcing_vbus(int port)
{
	int regval;

	tcpc_read(port, TCPC_REG_POWER_STATUS, &regval);
	return !!(regval & TCPC_REG_POWER_STATUS_SOURCING_VBUS);
}

int board_set_active_charge_port(int port)
{
	int is_real_port = (port >= 0 && port < board_get_usb_pd_port_count());
	int i;
	int old_port;

	if (!is_real_port && port != CHARGE_PORT_NONE)
		return EC_ERROR_INVAL;

	old_port = charge_manager_get_active_charge_port();

	CPRINTS("New chg p%d", port);

	/* Disable all ports. */
	if (port == CHARGE_PORT_NONE) {
		for (i = 0; i < board_get_usb_pd_port_count(); i++) {
			tcpc_write(i, TCPC_REG_COMMAND,
				   TCPC_REG_COMMAND_SNK_CTRL_LOW);
			raa489000_enable_asgate(i, false);
		}

		return EC_SUCCESS;
	}

	/* Check if port is sourcing VBUS. */
	if (board_is_sourcing_vbus(port)) {
		CPRINTS("Skip enable p%d", port);
		return EC_ERROR_INVAL;
	}

	/*
	 * Turn off the other ports sink path FETs, before enabling the
	 * requested charge port.
	 */
	for (i = 0; i < board_get_usb_pd_port_count(); i++) {
		if (i == port)
			continue;

		if (tcpc_write(i, TCPC_REG_COMMAND,
			       TCPC_REG_COMMAND_SNK_CTRL_LOW))
			CPRINTS("p%d: sink path disable failed.", i);
		raa489000_enable_asgate(i, false);
	}

	/*
	 * Stop the charger IC from switching while changing ports.  Otherwise,
	 * we can overcurrent the adapter we're switching to. (crbug.com/926056)
	 */
	if ((old_port != CHARGE_PORT_NONE) && (old_port != port))
		charger_discharge_on_ac(1);

	/* Enable requested charge port. */
	if (raa489000_enable_asgate(port, true) ||
	    tcpc_write(port, TCPC_REG_COMMAND,
		       TCPC_REG_COMMAND_SNK_CTRL_HIGH)) {
		CPRINTS("p%d: sink path enable failed.", port);
		charger_discharge_on_ac(0);
		return EC_ERROR_UNKNOWN;
	}

	/* Allow the charger IC to begin/continue switching. */
	charger_discharge_on_ac(0);

	return EC_SUCCESS;
}

__override void ocpc_get_pid_constants(int *kp, int *kp_div, int *ki,
				       int *ki_div, int *kd, int *kd_div)
{
	*kp = 3;
	*kp_div = 14;

	*ki = 3;
	*ki_div = 500;

	*kd = 4;
	*kd_div = 40;
}

__override void typec_set_source_current_limit(int port, enum tcpc_rp_value rp)
{
	if (port < 0 || port > board_get_usb_pd_port_count())
		return;

	raa489000_set_output_current(port, rp);
}

/* Sensors */
static struct mutex g_lid_mutex;
static struct mutex g_base_mutex;

/* Matrices to rotate accelerometers into the standard reference. */
static const mat33_fp_t lid_standard_ref = { { 0, FLOAT_TO_FP(1), 0 },
					     { FLOAT_TO_FP(1), 0, 0 },
					     { 0, 0, FLOAT_TO_FP(-1) } };

static const mat33_fp_t base_standard_ref = { { 0, FLOAT_TO_FP(1), 0 },
					      { FLOAT_TO_FP(-1), 0, 0 },
					      { 0, 0, FLOAT_TO_FP(1) } };

static struct accelgyro_saved_data_t g_bma253_data;
static struct bmi_drv_data_t g_bmi160_data;

struct motion_sensor_t motion_sensors[] = {
	[LID_ACCEL] = {
		.name = "Lid Accel",
		.active_mask = SENSOR_ACTIVE_S0_S3,
		.chip = MOTIONSENSE_CHIP_BMA255,
		.type = MOTIONSENSE_TYPE_ACCEL,
		.location = MOTIONSENSE_LOC_LID,
		.drv = &bma2x2_accel_drv,
		.mutex = &g_lid_mutex,
		.drv_data = &g_bma253_data,
		.port = I2C_PORT_SENSOR,
		.i2c_spi_addr_flags = BMA2x2_I2C_ADDR2_FLAGS,
		.rot_standard_ref = &lid_standard_ref,
		.default_range = 2,
		.min_frequency = BMA255_ACCEL_MIN_FREQ,
		.max_frequency = BMA255_ACCEL_MAX_FREQ,
		.config = {
			[SENSOR_CONFIG_EC_S0] = {
				.odr = 10000 | ROUND_UP_FLAG,
			},
			[SENSOR_CONFIG_EC_S3] = {
				.odr = 10000 | ROUND_UP_FLAG,
			},
		},
	},
	[BASE_ACCEL] = {
		.name = "Base Accel",
		.active_mask = SENSOR_ACTIVE_S0_S3,
		.chip = MOTIONSENSE_CHIP_BMI160,
		.type = MOTIONSENSE_TYPE_ACCEL,
		.location = MOTIONSENSE_LOC_BASE,
		.drv = &bmi160_drv,
		.mutex = &g_base_mutex,
		.drv_data = &g_bmi160_data,
		.port = I2C_PORT_SENSOR,
		.i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
		.rot_standard_ref = &base_standard_ref,
		.default_range = 4,
		.min_frequency = BMI_ACCEL_MIN_FREQ,
		.max_frequency = BMI_ACCEL_MAX_FREQ,
		.config = {
			[SENSOR_CONFIG_EC_S0] = {
				.odr = 13000 | ROUND_UP_FLAG,
				.ec_rate = 100 * MSEC,
			},
			[SENSOR_CONFIG_EC_S3] = {
				.odr = 10000 | ROUND_UP_FLAG,
				.ec_rate = 100 * MSEC,
			},
		},
	},
	[BASE_GYRO] = {
		.name = "Base Gyro",
		.active_mask = SENSOR_ACTIVE_S0_S3,
		.chip = MOTIONSENSE_CHIP_BMI160,
		.type = MOTIONSENSE_TYPE_GYRO,
		.location = MOTIONSENSE_LOC_BASE,
		.drv = &bmi160_drv,
		.mutex = &g_base_mutex,
		.drv_data = &g_bmi160_data,
		.port = I2C_PORT_SENSOR,
		.i2c_spi_addr_flags = BMI160_ADDR0_FLAGS,
		.default_range = 1000, /* dps */
		.rot_standard_ref = &base_standard_ref,
		.min_frequency = BMI_GYRO_MIN_FREQ,
		.max_frequency = BMI_GYRO_MAX_FREQ,
	},
};

unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);

static const mat33_fp_t lid_lis2dwl_ref = { { 0, FLOAT_TO_FP(1), 0 },
					    { FLOAT_TO_FP(1), 0, 0 },
					    { 0, 0, FLOAT_TO_FP(-1) } };

/* Lid accel private data */
static struct stprivate_data g_lis2dwl_data;
struct motion_sensor_t lis2dwl_lid_accel = {

		.name = "Lid Accel",
		.active_mask = SENSOR_ACTIVE_S0_S3,
		.chip = MOTIONSENSE_CHIP_LIS2DWL,
		.type = MOTIONSENSE_TYPE_ACCEL,
		.location = MOTIONSENSE_LOC_LID,
		.drv = &lis2dw12_drv,
		.mutex = &g_lid_mutex,
		.drv_data = &g_lis2dwl_data,
		.port = I2C_PORT_SENSOR,
		.i2c_spi_addr_flags = LIS2DWL_ADDR1_FLAGS,
		.rot_standard_ref = &lid_lis2dwl_ref,
		.default_range = 2, /* g */
		.min_frequency = LIS2DW12_ODR_MIN_VAL,
		.max_frequency = LIS2DW12_ODR_MAX_VAL,
		.config = {
			/* EC use accel for angle detection */
			[SENSOR_CONFIG_EC_S0] = {
				.odr = 12500 | ROUND_UP_FLAG,
			},
			/* Sensor on for lid angle detection */
			[SENSOR_CONFIG_EC_S3] = {
				.odr = 10000 | ROUND_UP_FLAG,
			},
		},
};

static const mat33_fp_t lid_KX022_ref = { { 0, FLOAT_TO_FP(1), 0 },
					  { FLOAT_TO_FP(1), 0, 0 },
					  { 0, 0, FLOAT_TO_FP(-1) } };

static struct kionix_accel_data g_kx022_data;
struct motion_sensor_t kx022_lid_accel = {
	.name = "Lid Accel",
	.active_mask = SENSOR_ACTIVE_S0_S3,
	.chip = MOTIONSENSE_CHIP_KX022,
	.type = MOTIONSENSE_TYPE_ACCEL,
	.location = MOTIONSENSE_LOC_LID,
	.drv = &kionix_accel_drv,
	.mutex = &g_lid_mutex,
	.drv_data = &g_kx022_data,
	.port = I2C_PORT_ACCEL,
	.i2c_spi_addr_flags = KX022_ADDR1_FLAGS,
	.rot_standard_ref = &lid_KX022_ref,
	.min_frequency = KX022_ACCEL_MIN_FREQ,
	.max_frequency = KX022_ACCEL_MAX_FREQ,
	.default_range = 2, /* g, to support tablet mode */
	.config = {
		/* EC use accel for angle detection */
		[SENSOR_CONFIG_EC_S0] = {
			.odr = 10000 | ROUND_UP_FLAG,
		},
		/* EC use accel for angle detection */
		[SENSOR_CONFIG_EC_S3] = {
			.odr = 10000 | ROUND_UP_FLAG,
		},
	},
};

static struct icm_drv_data_t g_icm42607_data;
const mat33_fp_t based_ref_icm42607 = { { FLOAT_TO_FP(1), 0, 0 },
					{ 0, FLOAT_TO_FP(1), 0 },
					{ 0, 0, FLOAT_TO_FP(1) } };
struct motion_sensor_t icm42607_base_accel = {
	 .name = "Base Accel",
	 .active_mask = SENSOR_ACTIVE_S0_S3,
	 .chip = MOTIONSENSE_CHIP_ICM42607,
	 .type = MOTIONSENSE_TYPE_ACCEL,
	 .location = MOTIONSENSE_LOC_BASE,
	 .drv = &icm42607_drv,
	 .mutex = &g_base_mutex,
	 .drv_data = &g_icm42607_data,
	 .port = I2C_PORT_ACCEL,
	 .i2c_spi_addr_flags = ICM42607_ADDR0_FLAGS,
	 .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs.*/
	 .rot_standard_ref = &based_ref_icm42607,
	 .min_frequency = ICM42607_ACCEL_MIN_FREQ,
	 .max_frequency = ICM42607_ACCEL_MAX_FREQ,
	 .config = {
		 /* EC use accel for angle detection */
		[SENSOR_CONFIG_EC_S0] = {
			.odr = 10000 | ROUND_UP_FLAG,
		},
		/* EC use accel for angle detection */
		[SENSOR_CONFIG_EC_S3] = {
			.odr = 10000 | ROUND_UP_FLAG,
		},
	 },
};

struct motion_sensor_t icm42607_base_gyro = {
	.name = "Base Gyro",
	.active_mask = SENSOR_ACTIVE_S0_S3,
	.chip = MOTIONSENSE_CHIP_ICM42607,
	.type = MOTIONSENSE_TYPE_GYRO,
	.location = MOTIONSENSE_LOC_BASE,
	.drv = &icm42607_drv,
	.mutex = &g_base_mutex,
	.drv_data = &g_icm42607_data,
	.port = I2C_PORT_ACCEL,
	.i2c_spi_addr_flags = ICM42607_ADDR0_FLAGS,
	.default_range = 1000, /* dps */
	.rot_standard_ref = &based_ref_icm42607,
	.min_frequency = ICM42607_GYRO_MIN_FREQ,
	.max_frequency = ICM42607_GYRO_MAX_FREQ,
};

static struct bmi_drv_data_t g_bmi220_data;
const mat33_fp_t based_ref_bmi220 = { { 0, FLOAT_TO_FP(1), 0 },
				      { FLOAT_TO_FP(-1), 0, 0 },
				      { 0, 0, FLOAT_TO_FP(1) } };
struct motion_sensor_t bmi220_base_accel = {
	 .name = "Base Accel",
	 .active_mask = SENSOR_ACTIVE_S0_S3,
	 .chip = MOTIONSENSE_CHIP_BMI220,
	 .type = MOTIONSENSE_TYPE_ACCEL,
	 .location = MOTIONSENSE_LOC_BASE,
	 .drv = &bmi260_drv,
	 .mutex = &g_base_mutex,
	 .drv_data = &g_bmi220_data,
	 .port = I2C_PORT_ACCEL,
	 .i2c_spi_addr_flags = BMI260_ADDR0_FLAGS,
	 .default_range = 4, /* g, to meet CDD 7.3.1/C-1-4 reqs.*/
	 .rot_standard_ref = &based_ref_bmi220,
	 .min_frequency = BMI_ACCEL_MIN_FREQ,
	 .max_frequency = BMI_ACCEL_MAX_FREQ,
	 .config = {
		[SENSOR_CONFIG_EC_S0] = {
				.odr = 13000 | ROUND_UP_FLAG,
				.ec_rate = 100 * MSEC,
		},
		[SENSOR_CONFIG_EC_S3] = {
			.odr = 10000 | ROUND_UP_FLAG,
			.ec_rate = 100 * MSEC,
		},
	 },
};

struct motion_sensor_t bmi220_base_gyro = {
	.name = "Base Gyro",
	.active_mask = SENSOR_ACTIVE_S0_S3,
	.chip = MOTIONSENSE_CHIP_BMI220,
	.type = MOTIONSENSE_TYPE_GYRO,
	.location = MOTIONSENSE_LOC_BASE,
	.drv = &bmi260_drv,
	.mutex = &g_base_mutex,
	.drv_data = &g_bmi220_data,
	.port = I2C_PORT_ACCEL,
	.i2c_spi_addr_flags = BMI260_ADDR0_FLAGS,
	.default_range = 1000, /* dps */
	.rot_standard_ref = &based_ref_bmi220,
	.min_frequency = BMI_GYRO_MIN_FREQ,
	.max_frequency = BMI_GYRO_MAX_FREQ,
};

void board_init(void)
{
	int on;
	uint32_t board_id;

	gpio_enable_interrupt(GPIO_USB_C0_INT_ODL);
	gpio_enable_interrupt(GPIO_USB_C1_INT_ODL);

	/*
	 * If interrupt lines are already low, schedule them to be processed
	 * after inits are completed.
	 */
	if (!gpio_get_level(GPIO_USB_C0_INT_ODL))
		hook_call_deferred(&check_c0_line_data, 0);
	if (!gpio_get_level(GPIO_USB_C1_INT_ODL))
		hook_call_deferred(&check_c1_line_data, 0);

	gpio_enable_interrupt(GPIO_USB_C0_CCSBU_OVP_ODL);
	/* Enable Base Accel interrupt */
	gpio_enable_interrupt(GPIO_BASE_SIXAXIS_INT_L);
	/* Enable gpio interrupt for pen detect */
	gpio_enable_interrupt(GPIO_PEN_DET_ODL);

	/* Turn on 5V if the system is on, otherwise turn it off */
	on = chipset_in_state(CHIPSET_STATE_ON | CHIPSET_STATE_ANY_SUSPEND |
			      CHIPSET_STATE_SOFT_OFF);
	board_power_5v_enable(on);

	if (!gpio_get_level(GPIO_PEN_DET_ODL))
		gpio_set_level(GPIO_EN_PP3300_PEN, 1);

	cbi_get_board_version(&board_id);

	if (board_id > 2) {
		if (get_cbi_fw_config_tablet_mode()) {
			if (get_cbi_ssfc_base_sensor() ==
			    SSFC_SENSOR_ICM42607) {
				motion_sensors[BASE_ACCEL] =
					icm42607_base_accel;
				motion_sensors[BASE_GYRO] = icm42607_base_gyro;
				CPRINTF("BASE GYRO is ICM42607");
			} else if (get_cbi_ssfc_base_sensor() ==
				   SSFC_SENSOR_BMI220) {
				motion_sensors[BASE_ACCEL] = bmi220_base_accel;
				motion_sensors[BASE_GYRO] = bmi220_base_gyro;
				CPRINTF("BASE GYRO is BMI220");
			} else {
				CPRINTF("BASE GYRO is BMI160");
			}

			if (get_cbi_ssfc_lid_sensor() == SSFC_SENSOR_LIS2DWL) {
				motion_sensors[LID_ACCEL] = lis2dwl_lid_accel;
				CPRINTF("LID_ACCEL is LIS2DWL");
			} else if (get_cbi_ssfc_lid_sensor() ==
				   SSFC_SENSOR_KX022) {
				motion_sensors[LID_ACCEL] = kx022_lid_accel;
				CPRINTF("LID_ACCEL is KX022");
			} else {
				CPRINTF("LID_ACCEL is BMA253");
			}
		} else {
			motion_sensor_count = 0;
			gmr_tablet_switch_disable();
			/*
			 * Base accel is not stuffed, don't allow
			 * line to float.
			 */
			gpio_set_flags(GPIO_BASE_SIXAXIS_INT_L,
				       GPIO_INPUT | GPIO_PULL_DOWN);
		}
	} else {
		if (get_cbi_ssfc_base_sensor() == SSFC_SENSOR_ICM42607) {
			motion_sensors[BASE_ACCEL] = icm42607_base_accel;
			motion_sensors[BASE_GYRO] = icm42607_base_gyro;
			CPRINTF("BASE GYRO is ICM42607");
		} else if (get_cbi_ssfc_base_sensor() == SSFC_SENSOR_BMI220) {
			motion_sensors[BASE_ACCEL] = bmi220_base_accel;
			motion_sensors[BASE_GYRO] = bmi220_base_gyro;
			CPRINTF("BASE GYRO is BMI220");
		} else {
			CPRINTF("BASE GYRO is BMI160");
		}

		if (get_cbi_ssfc_lid_sensor() == SSFC_SENSOR_LIS2DWL) {
			motion_sensors[LID_ACCEL] = lis2dwl_lid_accel;
			CPRINTF("LID_ACCEL is LIS2DWL");
		} else if (get_cbi_ssfc_lid_sensor() == SSFC_SENSOR_KX022) {
			motion_sensors[LID_ACCEL] = kx022_lid_accel;
			CPRINTF("LID_ACCEL is KX022");
		} else {
			CPRINTF("LID_ACCEL is BMA253");
		}
	}
}
DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);

void motion_interrupt(enum gpio_signal signal)
{
	switch (get_cbi_ssfc_base_sensor()) {
	case SSFC_SENSOR_ICM42607:
		icm42607_interrupt(signal);
		break;
	case SSFC_SENSOR_BMI220:
		bmi260_interrupt(signal);
		break;
	case SSFC_SENSOR_BMI160:
	default:
		bmi160_interrupt(signal);
		break;
	}
}

/* Thermistors */
const struct temp_sensor_t temp_sensors[] = {
	[TEMP_SENSOR_1] = { .name = "Memory",
			    .type = TEMP_SENSOR_TYPE_BOARD,
			    .read = get_temp_3v3_51k1_47k_4050b,
			    .idx = ADC_TEMP_SENSOR_1 },
	[TEMP_SENSOR_2] = { .name = "Ambient",
			    .type = TEMP_SENSOR_TYPE_BOARD,
			    .read = get_temp_3v3_51k1_47k_4050b,
			    .idx = ADC_TEMP_SENSOR_2 },
	[TEMP_SENSOR_3] = { .name = "Cpu",
			    .type = TEMP_SENSOR_TYPE_BOARD,
			    .read = get_temp_3v3_51k1_47k_4050b,
			    .idx = ADC_TEMP_SENSOR_3 },
};
BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT);

/* This callback disables keyboard when convertibles are fully open */
__override void lid_angle_peripheral_enable(int enable)
{
	int chipset_in_s0 = chipset_in_state(CHIPSET_STATE_ON);

	/*
	 * If the lid is in tablet position via other sensors,
	 * ignore the lid angle, which might be faulty then
	 * disable keyboard.
	 */
	if (tablet_get_mode())
		enable = 0;

	if (enable) {
		keyboard_scan_enable(1, KB_SCAN_DISABLE_LID_ANGLE);
	} else {
		/*
		 * Ensure that the chipset is off before disabling the keyboard.
		 * When the chipset is on, the EC keeps the keyboard enabled and
		 * the AP decides whether to ignore input devices or not.
		 */
		if (!chipset_in_s0)
			keyboard_scan_enable(0, KB_SCAN_DISABLE_LID_ANGLE);
	}
}